Everpure CGHC-1 Instant manual Features, General Installation/Operation/Maintenance Requirements

Page 2

Helia™

product specifications

Hot & Chilled Water Appliance

 

CGHC-1 Instant

Helia™ CGHC-1 Instant Hot & Chilled

Water Appliance – Part No. EV9318-50

Features:

>True commercial grade quality, delivering up to 6.6 gallons of chilled water per hour or 2.1 gallons of hot water per hour

>Chills to an ideal temperature of 40ºF.

>Heats to an ideal temperature of 200ºF, with adjustable temp control

>Compact unit is easy to hide in any kitchen cabinet or wet bar.

>Sealed ice bank cooling system ensures constant availability of chilled water

>Stainless steel components.

>3 wire service cord and plug included.

>Ambient water port equipped.

>Child proof hot water selector to dispense water at predetermined level

General Installation/Operation/Maintenance Requirements:

>Measures 16” high x 10” wide x 18” deep.

>Adjustable thermostat is factory pre-set.

>Install in well-ventilated cabinet.

Helpful Tips

>Position the appliance in the point of installation, away from sources of heat and direct sunlight

>Do not install the appliance outdoors and in very damp rooms

>The appliance should be positioned in such a way as to leave approximately 2.40 to 2.80 inches of space free for air to circulate freely

>Special ventilation grills/slits may be required when installing the unit in a cabinet so that the heat produced by the refrigerating circuit can properly circulate and escape

>Make sure the appliance s resting fully on all four supporting feet

>Before making the water connection, make sure the incoming water pressure is between 14.5 psi and 43.5 psi

>If the incoming water pressure is below 14.5 psi or the flow rate is less than 0.50 gpm, fit a device capable of increasing the pressure (such as an autoclave or similar)

>If the incoming water pressure exceeds 43.5 psi, predispose a pressure reducer capable of reducing the latter to the 14.5 psi and 43.5 psi

capacity

6.6gallons per hour for chilled water and

2.1gallons per hour for hot water

temperature output

40°F (based on 68°F inlet water and 77°F ambient)

inlet/outlet

1/4” O.D. tubes for inlet and 6 mm O.D. tubes for outlets

power

870 watts

motor compressor

1/12 HP, 115 VAC, 60Hz single phase

everpure warranty

The Helia™ appliance has a 24-month limited warranty on the refrigeration system of the unit. Electrical components and water system are warranted for 12 months from date of installation. Warranty pertains to drinking water applications only. Non-drinking water applications are not covered under warranty. A detailed warranty statement is included with each unit.

This water appliance is approved by Underwriters Laboratories Inc. in accordance with NSF/ANSI 61-2002e.

Everpure, Micro-Pure, Helia™ and the silver canister color are registered trademarks of Everpure, LLC © 2008

Image 2
Contents Combine with commercial grade water filtration Hot & Chilled Water ApplianceCGHC-1 Instant Helpful Tips FeaturesGeneral Installation/Operation/Maintenance Requirements

CGHC-1 Instant specifications

The Everpure CGHC-1 Instant is a sophisticated water filtration system designed to enhance the quality of drinking water and improve the taste and safety of beverages. This advanced product is particularly favored in commercial settings, such as restaurants and cafes, where the integrity of water quality is paramount for food and beverage preparation.

One of the main features of the Everpure CGHC-1 Instant is its multi-stage filtration process. This system employs a combination of activated carbon and membrane filtration technology to effectively reduce unwanted contaminants. The activated carbon removes chlorine, sediments, and volatile organic compounds, enhancing the taste of water. Simultaneously, the membrane filtration captures even smaller particles, including bacteria and cysts, ensuring water is free from harmful pathogens.

Another significant characteristic of the Everpure CGHC-1 Instant is its capacity for instant hot water delivery. This is accomplished through an integrated heating element that provides a continuous supply of hot water on demand. This feature is particularly advantageous for establishments that rely on quick beverage service, such as tea, coffee, or soups. The system's efficient heating mechanism minimizes wait times, thus improving workflow and customer satisfaction.

The Everpure CGHC-1 Instant also incorporates advanced monitoring technology. It is engineered with a built-in indicator that signals when the filter needs replacement. This proactive feature helps maintain optimal performance, allowing users to replace filters before any degradation in water quality occurs. The unit’s compact design makes it easy to install in various locations without occupying much space.

Moreover, the CGHC-1 Instant is designed with durability in mind. It features high-quality materials that can withstand regular use in high-demand environments, ensuring longevity and reliability. The system also promotes sustainability by minimizing plastic waste associated with bottled water, providing an eco-friendly alternative.

In summary, the Everpure CGHC-1 Instant is an excellent choice for those seeking an efficient, reliable, and high-quality water filtration solution. With its multi-stage filtration process, instant hot water delivery, built-in monitoring technology, and durable design, it stands out as a top-tier product for enhancing water quality and beverage preparation in commercial settings.