GE GXPL03H installation instructions GE Water Filtration Pitcher

Page 1

GE Water Filtration Pitcher

USE AND CARE/INSTALLATION INSTRUCTIONS

Filtration Pitcher – GE Model GXPL03H

Your new GE Water Filtration Pitcher comes complete with a filter. Each filter gives you up to 40 gallons (150 L) or 2 months of great-tasting water.

Filter should be changed after 2 months of use.

SAFETY PRECAUTIONS

Do not use where water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the filter.

WARNING

Wash the pitcher, lid and reservoir with soap and warm water and rinse thoroughly. DO NOT WASH FILTER CARTRIDGE. Pitcher, reservoir and lid are NOT DISHWASHER-SAFE.

All remaining plastic bags after the installation could be a suffocation hazard. Discard safely and promptly.

For cold water use only. DO NOT FILTER HOT WATER (max. 85°F/30°C).

Make certain that use complies with state law, local laws and other regulations.

The GE Water Filtration Pitcher model GXPL03H has been Tested and Certified by NSF International under NSF/ANSI International Standard 42 and Standard 53. See performance data sheet for specific claims.

Tested against NSF/ANSI Standard 53 for lead reduction by

WQA laboratories

After draining the filter pitcher, add more water promptly to keep filter cartridge wet. If filter cartridge dries out, it may need to soak before being used. If filter cartridge becomes too dried out, it may need to be replaced.

Keep pitcher filter refrigerated at all times. After 3–4 days, replace unused water with fresh water.

All parts EXCEPT THE FILTER CARTRIDGE should be washed regularly. It is important to keep food and beverage equipment clean and sanitary.

Pitcher, reservoir and lid ARE NOT DISHWASHER-SAFE.

SPECIFICATIONS

This System has been tested according to NSF/ANSI 42 and 53 for reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42 and 53.

Actual performance may vary with local water conditions.

FXPL3D & FXPL3CAD Cartridge

 

 

Max. Permissible

 

 

 

 

Influent Challenge

Product Water

Reduction

Minimum

Average

Substance

Concentration

Concentration

Requirements

Reduction

Reduction

Standard 42

 

 

 

 

 

Chlorine

2.0 mg/L + 10%

 

>50%

77%

87%

Particulate Class V

at least

 

>85%

83.7%

92.1%

(30 to <50 ∝m)

1,000 particles/mL

 

 

 

 

Zinc

10 mg/L + 10%

5 mg/L

 

58%

65%

Bacteriostatic*

Unit passes NSF Std 42 for Bacteriostatic effects

 

 

Standard 53

 

 

 

 

 

Copper (pH 6.5)

3.0 mg/L + 10%

1.3 mg/L

 

85%

89.2%

Copper (pH 8.5)

3.0 mg/L + 10%

1.3 mg/L

 

66.1%

82%

Mercury (pH 6.5)

0.006 mg/L + 10%

0.002 mg/L

 

88.3%

91.6%

Mercury (pH 8.5)

0.006 mg/L + 10%

0.002 mg/L

 

79%

87%

Cadmium (pH 6.5)

0.03 mg/L + 10%

0.005 mg/L

 

96.5%

98.2%

Cadmium (pH 8.5)

0.03 mg/L + 10%

0.005 mg/L

 

95.8%

97.2%

Capacity = 40 gallons (150 L) or 2 months. Testing was performed under standard laboratory conditions; actual performance may vary.

*The term “bacteriostatic” indicates that the system limits the passage or growth of bacteria that may already exist in the incoming water. It does not mean that water leaving the system is safer to drink than water entering the system.

Tested against NSF/ANSI Standard 53 for lead reduction by WQA laboratories

Lead (pH 6.5)

0.15 mg/L + 10%

0.010 mg/L

97.2%

98.5%

Lead (pH 8.5)

0.15 mg/L + 10%

0.010 mg/L

95.2%

98.2%

Test Conditions

pH: 6.5–8.5

Water Temperature: 72°–75°F (22°–24°C)

Operating Requirements

Filter Capacity: Each filter is certified for 40 gallons (150 L) or approximately 80 pitchers, which lasts an average family at least two months.

Water Temperature: Max 85°F (30°C), Min 35°F (2°C).

LIMITED ONE-YEAR WARRANTY

What does this warranty cover?

 

 

 

 

 

 

 

 

— Any defect in materials or workmanship in the manufactured product.

 

EXCLUSION OF IMPLIED WARRANTIES—Your sole and exclusive remedy is product

 

 

What does this warranty not cover?

 

 

 

 

exchange as provided in this Limited Warranty. Any implied warranties, including the

 

 

— Filter canister and batteries after 30 days from date of purchase.

 

 

 

 

implied warranties of merchantability or fitness for a particular purpose, are limited to

 

 

— Service trips to your home to teach you how to use the product.

 

 

 

 

one year or the shortest period allowed by law.

 

 

— Improper installation, delivery or maintenance.

 

 

 

 

 

 

 

— Failure of the product if it is abused, misused, altered, used commercially or used for

 

 

 

 

 

 

 

 

other than the intended purpose.

This warranty is extended to the original purchaser and any succeeding owner for products

— Use of this product where water is microbiologically unsafe or of unknown quality,

without adequate disinfection before or after the system. Systems certified for cyst

purchased for home or office use within the USA. In Alaska, the warranty excludes the cost

reduction may be used on disinfected water that may contain filterable cysts.

of shipping or service to your home or office.

— Damage to the product caused by accident, fire, floods or acts of God.

Some states do not allow the exclusion or limitation of incidental or consequential damages.

Incidental or consequential damage caused by possible defects with this appliance, its

This warranty gives you specific legal rights, and you may also have other rights, which vary

installation or repair.

from state to state. To know what your legal rights are, consult your local or state consumer

For how long after the original purchase?

affairs office or your state’s Attorney General.

— One (1) year.

Contact us at ge.com, or call toll-free at 800.952.5039 in the U.S., or 866.777.7627 in Canada.

How do I make a warranty claim?

 

— Return to the retailer from which it was purchased, along with a copy of the “Proof of

 

Purchase.” A new or reconditioned unit will be provided. This warranty excludes the

 

cost of shipping the product to your home.

 

147207 Rev. A 215C1181P001 49-50166-1(10-06 JR)

ge.com

GENERAL ELECTRIC COMPANY, Appliance Park, Louisville, KY 40225

1.800.952.5039 in U.S.; 1.866.777.7627 in Canada

©2006 General Electric Company

Image 1
Contents GE Water Filtration Pitcher USE and CARE/INSTALLATION InstructionsFiltration Pitcher GE Model GXPL03H Parts Included Start Up ProceduresNot Wash Filter Cartridge Cartridge Replacement Procedure Indicator LightReplacement Cartridge Filter Filling the Pitcher with Tap WaterPage Pot à eau avec filtre GE Utilisation ET ENTRETIEN/INSTRUCTIONS D’INSTALLATIONPot à filtre Modèle GE GXPL03H Cartouches FXPL3D & FXPL3CADInstructions de démarrage Pièces fourniesInstructions de démarrage suite NE Lavez PAS LA Cartouche DE FiltrationCartouche de filtration de remplacement Remplacement de la cartoucheTémoin lumineux Remplissage du pot avec de l’eau du robinetPage USO Y Cuidado / Instrucciones DE Instalación Jarra de filtración de agua GEJarra de filtración GE Modelo GXPL03H Cartuchos FXPL3D & FXPL3CADProcedimientos de inicio Piezas incluidasNo Lave EL Cartucho DEL Filtro Procedimiento para la sustitución del cartucho Luz indicadoraRecambio del filtro en el cartucho Llenado de la jarra con agua corriente

GXPL03H specifications

The GE GXPL03H is an advanced, high-efficiency heat pump water heater that combines innovative technology with user-friendly features. As part of GE's commitment to energy efficiency and sustainability, the GXPL03H is designed to meet the needs of homeowners looking to reduce their energy bills while benefiting the environment.

One of the standout features of the GXPL03H is its impressive energy efficiency rating. The unit has a high Energy Factor (EF) rating, meaning that it uses significantly less energy compared to traditional water heaters. This is primarily achieved through its advanced heat pump technology, which extracts heat from the surrounding air and uses it to heat the water, rather than generating heat directly. As a result, the GXPL03H can deliver substantial energy savings, making it an appealing choice for eco-conscious consumers.

The GXPL03H comes with a user-friendly digital interface that allows homeowners to easily set and monitor their hot water needs. The intuitive control panel provides access to various operating modes, including efficiency modes and high-demand settings, empowering users to optimize the system's performance based on their specific requirements. With options for vacation mode and other programmable settings, the GE GXPL03H can be customized for maximum efficiency and convenience.

Another notable characteristic of the GXPL03H is its robust construction. The unit features a durable exterior and a high-quality tank designed to maintain the temperature of the water efficiently. This design contributes to the longevity of the water heater and minimizes maintenance needs over time.

Additionally, the GE GXPL03H is equipped with advanced noise-reduction technology, ensuring that it operates quietly, making it suitable for indoor installation without causing disruptions. The unit also includes a comprehensive warranty, providing added peace of mind for users.

In summary, the GE GXPL03H heat pump water heater is an efficient, technologically advanced solution for homeowners seeking to lower their energy costs and decrease their environmental impact. With its innovative design, intuitive features, and reliable performance, it represents a significant step toward the future of eco-friendly home appliances.