Safety Precautions, Troubleshooting

Safety Information

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of property damage or personal injury.

SAFETY PRECAUTIONS

Operating Instructions

Tips

■Check with your local public works department for plumbing codes. You must follow these guidelines as you install the water filtration system.

■Use the water filtration system on a potable, safe-to-drink, home COLD water supply only. The filter cartridges will not purify the water, or make it safe to drink.

■Do not use on a hot water supply (100°F. max.).

WARNING: Do not use with water that is microbiologically unsafe, or of unknown quality, without adequate disinfection before or after the system, such as single-user wells, or other non-public water systems not regulated by federal or state health and safety requirements.

Troubleshooting

PROPER INSTALLATION

This water filtration system must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive Installation Instructions, you can receive one by calling us toll-free at the GE Answer Center® 800.626.2000.

Customer Service

■Install or store where it will not be exposed to temperatures below freezing or exposed to any type of weather. Water freezing in the system will break it. Do not attempt to treat water over 100°F.

WARNING: Discard all unused and packaging material after installation.

■Your water filtration system will withstand up to 125 pounds per square inch (psi) water pressure. If your house water supply pressure is higher than 100 psi, install a pressure reducing valve before installing the water filtration system.