Harman-Kardon AVR 110 Preset Up/Down When the tuner is, Speaker Select Press this button

Page 13

Remote Control Functions

tDirect Button: Press this button when the tuner is in use to start the sequence for direct entry of a station’s frequency. After press- ing the button simply press the proper Numeric Keys r to select a station. (See page 25 for more information on the tuner.)

uTuning Up/Down: When the tuner is in use, these buttons will tune up or down through the selected frequency band. If the Tuner Mode button s@has been pressed so that the AUTO indicator Vis illuminated, pressing and holding either of the buttons for three seconds will cause the tuner to seek the next station with acceptable signal strength for quality reception. When the AUTO indicator Vis NOT illumi- nated, pressing these buttons will tune stations in single-step increments. (See page 25 for more information.)

vMacro Buttons: Press these buttons to store or recall a “Macro”, which is a preprogrammed sequence of commands stored in the remote. (See page 28 for more information on storing and recalling macros.)

wTransport Controls: These buttons do not have any functions for the AVR 110, but they may be programmed for the forward/ reverse play operation of a wide variety of CD or DVD players, and audio or video cassette recorders. (See page 27 for more information on programming the remote.)

xSkip Up/Down Buttons: These buttons do not have a direct function with the AVR 110, but when used with a compatibly programmed CD or DVD changer they will change the disc currently being played in the changer.

yDisc Skip Buttons: These buttons have no direct function for the AVR 110, but they are often used when the remote is programmed to operate a CD or DVD changer to change the discs in the changer. (See page 30 for more information on using the remote with other devices.)

zPreset Up/Down: When the tuner is

in use, press these buttons to scroll through the stations programmed into the AVR 110’s mem- ory. When some source devices, such as CD players, VCRs and cassette decks, are selected using the device Input Selectors e, these buttons may function as Chapter Step or Track Advance.

`Clear Button: Press this button to clear incorrect entries when using the remote to directly enter a radio station’s frequency.

28Memory Button: Press this button to enter a radio station into the AVR 110’s preset memory. Once the MEMORY indicator S flashes, you have five seconds to enter a preset memory location using the Numeric Keys r. (See page 26 for more information.)

29Delay/Prev Ch.: Press this button to begin the process for setting the delay times used by the AVR 110 when processing surround sound. After pressing this button, the delay times are entered by pressing the Set button o and then using the Ú/Û buttons mq to change the setting. Press the Set button o again to complete the process. (See page 19 for more information.)

30Ý Button: Press this button to change a setting or selection when configuring many of the AVR 110’s settings.

31Speaker Select: Press this button

to begin the process of configuring the AVR 110’s bass management system for the type of speakers used in your system. Once the button has been pressed, use the Ú/Û but- tons mq to select the channel you wish to set up. Press the Set button o and then select another channel to configure. When all adjustments have been completed, press the Set button o twice to exit the settings and return to normal operation. (See page 17 for more information.)

32Spare Button: This button does not have any function for the operation of the AVR 110, but it is available for use to be programmed for a function from another remote.

33Volume Up/Down: Press these buttons to raise or lower the system volume.

34TV/Video Button: This button does not have a direct function on the AVR 110, but when used with a compatibly programmed VCR, DVD or satellite receiver that has a “TV/Video” function, pressing this button will switch between the output of the player or receiver and the external video input to that player. Consult the owner’s manual for your specific player or receiver for the details of how it implements this function.

35Mute: Press this button to momentarily silence the AVR 110 or TV set being controlled, depending on which device has been selected.

When the AVR 110 remote is being programmed to operate another device, this button is pressed with the Input Selector button e to begin the programming process. (See page 27 for more information on programming the remote.)

13REMOTE CONTROL FUNCTIONS

Page 12 Page 14
Image 13
Page 12 Page 14
Contents AVR 110 Audio/Video Receiver AVR 110 Audio/Video Receiver Introduction Description and FeaturesWhile complex digital systems are hard Multiple Digital Inputs and OutputsImportant Safety Information Safety InformationUnpacking Front Panel Controls Set Button ð Input Indicators ñ DelaySee Preset Stations Selector Press thisNight Mode Indicator Theater Mode IndicatorFront Panel Information Display Front Panel Information Display Rear Panel Connections Tape Outputs Switched AC Accessory OutletTape Inputs Surround Speaker Outputs See page 14 for more information on speaker polarity OFF Remote Control FunctionsRemote Control Functions Speaker Select Press this button Preset Up/Down When the tuner isSystem Installation Installation and ConnectionsAudio Equipment Connections Connect the analog output of a CD player to the CD inputs ¥Remote Control Extension System and Power ConnectionsAC Power Connections Speaker Selection and Placement System ConfigurationSpeaker Placement Plug the Power Cord ¡ into an unswitched AC outlet System SetupSpeaker Configuration If no subwoofer is connected to Output Level AdjustmentLights up Delay SettingsWand the PRO Logic indicator F lights up To set the delay times, follow these stepsPress the Set button oï Adjust the delay time by pressing Basic Operation OperationSource Selection Surround Mode Chart Digital Audio Playback Surround Mode SelectionSelecting a Digital Source Dolby DigitalAddition to the bitstream indicators, Digital Status IndicatorsNight Mode Or PCMPCM Audio Playback Tuner OperationMP3 Audio Playback Station SelectionTape Recording Output Level Trim AdjustmentDisplay Brightness Programming the Remote Programming the RemoteMode Selector/Channel Down button j Erasing Macro CommandsMacro Programming Press the AVR Selector fChannel Control Punch-Through Volume Punch-ThroughTransport Control Punch-Through Reassigning Device Control Selectors Resetting the Remote MemoryFunction List Preset Down Preset UpTune Down SkipSetup Code Table TV 011 013 069 001 074 148001 011 033 044 050 074 001 011 033 042 044 100 154 160 167 168Setup Code Table VCR 037 039 040 058 071 075 087 037 039 040 071019 027 052 002 020Setup Code Table CD 120 124 013 107022 047 079 091 148 047 054 055 056 091 093 102 103 106 162 163 164Setup Code Number Setup Code Table DVDSetup Code Table SAT Setup Code Table CBL 037 072 186 063 115 187003 018 047 048 052 130 145 183 203 001 188Processor Reset Troubleshooting GuideInformation from nonencoded programs Lights, motors or other electrical appliancesTechnical Specifications Page Page Page Harman Kardon, Incorporated Part No. J90200012600 Page Page Page Page Page Page

AVR 110 specifications

The Harman-Kardon AVR 110 is a versatile audio/video receiver designed for those seeking to enhance their home entertainment experience. Renowned for its sleek design and impressive sound quality, the AVR 110 is a reliable choice for anyone looking to create a home theater system.

At the core of the AVR 110 is its ability to deliver a rich, immersive audio experience. With a power output of 100 watts per channel, this receiver can fill a room with high-fidelity sound that caters to both music enthusiasts and movie lovers alike. The AVR 110 features a high-current, low-impedance design, which ensures that it can drive a wide range of speaker types and configurations without sacrificing performance.

One of the standout features of the AVR 110 is its advanced processing capabilities. It supports Dolby Digital and DTS formats, providing an authentic surround sound experience that brings films and music to life. The Dolby Pro Logic II technology also allows for expanded sound fields, making it possible to enjoy stereo recordings in a simulated surround sound format.

The AVR 110 is equipped with multiple audio and video inputs, making it easy to connect a variety of devices, including DVD players, gaming consoles, and streaming devices. This level of connectivity is complemented by a built-in AM/FM tuner, allowing users to explore radio programming as well. Additionally, the receiver features composite and component video switching, ensuring high-quality video signals for optimal viewing experiences.

Another notable characteristic of the AVR 110 is its user-friendly interface. The GUI (Graphical User Interface) simplifies navigation through various settings, allowing users to customize their audio and video configurations easily. This is particularly beneficial for those who may not be well-versed in home theater technology.

In terms of design, the AVR 110 boasts a modern and minimalist aesthetic, with a classic black finish that seamlessly integrates into any home décor. The front panel features a clear display, which provides important information about the current audio and video settings, enhancing usability.

Overall, the Harman-Kardon AVR 110 delivers a well-rounded, high-quality audio and video experience that is ideal for both casual viewers and serious audiophiles. Its combination of powerful performance, advanced technology, and ease of use makes it a competitive option in the world of home theater receivers. Whether watching movies or enjoying music, the AVR 110 is designed to provide an engaging experience that satisfies even the most discerning listeners.
Top Page Image Contents