Harman-Kardon AVR 110 owner manual Technical Specifications

Page 44

Technical Specifications

Audio Section

Stereo Mode

Continuous Average Power (FTC)

50 Watts per channel, 20Hz–20kHz,

@ <0.07% THD, both channels driven into 8 ohms

Five-Channel Surround Mode

Power per Individual Channel

Front L&R channels:

40 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

40 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms

Surround channels:

40 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

95dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz–100kHz

High Instantaneous

 

Current Capability (HCC)

±25 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16 µsec

Slew Rate

40V/µsec

FM Tuner Section

 

Frequency Range

87.5 –108MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

Tuner Output Level

1kHz, ±75kHz Dev 500mV

AM Tuner Section

 

Frequency Range

520 –1710kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop 500µV

Distortion

1kHz, 50% Mod 0.8%

Selectivity

±10kHz, 30dB

Video Section

 

Television Format

NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency

 

Response

10Hz–8MHz (–3dB)

General

 

Power Requirement

AC 120V/60Hz

Power Consumption

72W idle, 580W maximum

 

(2 channels driven)

Dimensions

 

Width

17.3 inches (440mm)

Height

6.5 inches (165mm)

Depth

17.1 inches (435mm)

Weight

31 lb (14.1kg)

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon is a registered trademark, and Power for the digital revolution is a trademark, of Harman Kardon, Inc.

*Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” “AC-3” and the Double-D symbol are

trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.

DTS and DTS Surround are trademarks of Digital Theater Systems, Inc.

UltraStereo is a trademark of UltraStereo Corp.

VMAx is a registered trademark of Harman International Industries, Inc., and is an implementation of Cooper Bauck Transaural Stereo under patent license.

Logic 7 is a registered trademark of Lexicon, Inc., a Harman International Company.

Crystal is a registered trademark of Cirrus Logic Corp.

44TECHNICAL SPECIFICATIONS

Image 44
Contents AVR 110 Audio/Video Receiver AVR 110 Audio/Video Receiver Description and Features IntroductionWhile complex digital systems are hard Multiple Digital Inputs and OutputsUnpacking Safety InformationImportant Safety Information Set Button ð Input Indicators ñ Delay Front Panel ControlsPreset Stations Selector Press this SeeFront Panel Information Display Theater Mode IndicatorNight Mode Indicator Front Panel Information Display Tape Inputs Surround Speaker Outputs Tape Outputs Switched AC Accessory OutletRear Panel Connections See page 14 for more information on speaker polarity Remote Control Functions OFFRemote Control Functions Preset Up/Down When the tuner is Speaker Select Press this buttonInstallation and Connections System InstallationAudio Equipment Connections Connect the analog output of a CD player to the CD inputs ¥AC Power Connections System and Power ConnectionsRemote Control Extension Speaker Placement System ConfigurationSpeaker Selection and Placement Speaker Configuration System SetupPlug the Power Cord ¡ into an unswitched AC outlet Output Level Adjustment If no subwoofer is connected toDelay Settings Lights upPress the Set button oï Adjust the delay time by pressing To set the delay times, follow these stepsWand the PRO Logic indicator F lights up Source Selection OperationBasic Operation Surround Mode Chart Surround Mode Selection Digital Audio PlaybackSelecting a Digital Source Dolby DigitalDigital Status Indicators Addition to the bitstream indicators,Night Mode Or PCMTuner Operation PCM Audio PlaybackMP3 Audio Playback Station SelectionDisplay Brightness Output Level Trim AdjustmentTape Recording Programming the Remote Programming the RemoteErasing Macro Commands Mode Selector/Channel Down button jMacro Programming Press the AVR Selector fTransport Control Punch-Through Volume Punch-ThroughChannel Control Punch-Through Resetting the Remote Memory Reassigning Device Control SelectorsFunction List Preset Up Preset DownTune Down SkipSetup Code Table TV 001 074 148 011 013 069001 011 033 044 050 074 001 011 033 042 044 100 154 160 167 168Setup Code Table VCR 037 039 040 071 037 039 040 058 071 075 087019 027 052 002 020Setup Code Table CD 013 107 120 124022 047 079 091 148 047 054 055 056 091 093 102 103 106 162 163 164Setup Code Table DVD Setup Code NumberSetup Code Table SAT Setup Code Table CBL 063 115 187 037 072 186003 018 047 048 052 130 145 183 203 001 188Troubleshooting Guide Processor ResetInformation from nonencoded programs Lights, motors or other electrical appliancesTechnical Specifications Page Page Page Harman Kardon, Incorporated Part No. J90200012600 Page Page Page Page Page Page

AVR 110 specifications

The Harman-Kardon AVR 110 is a versatile audio/video receiver designed for those seeking to enhance their home entertainment experience. Renowned for its sleek design and impressive sound quality, the AVR 110 is a reliable choice for anyone looking to create a home theater system.

At the core of the AVR 110 is its ability to deliver a rich, immersive audio experience. With a power output of 100 watts per channel, this receiver can fill a room with high-fidelity sound that caters to both music enthusiasts and movie lovers alike. The AVR 110 features a high-current, low-impedance design, which ensures that it can drive a wide range of speaker types and configurations without sacrificing performance.

One of the standout features of the AVR 110 is its advanced processing capabilities. It supports Dolby Digital and DTS formats, providing an authentic surround sound experience that brings films and music to life. The Dolby Pro Logic II technology also allows for expanded sound fields, making it possible to enjoy stereo recordings in a simulated surround sound format.

The AVR 110 is equipped with multiple audio and video inputs, making it easy to connect a variety of devices, including DVD players, gaming consoles, and streaming devices. This level of connectivity is complemented by a built-in AM/FM tuner, allowing users to explore radio programming as well. Additionally, the receiver features composite and component video switching, ensuring high-quality video signals for optimal viewing experiences.

Another notable characteristic of the AVR 110 is its user-friendly interface. The GUI (Graphical User Interface) simplifies navigation through various settings, allowing users to customize their audio and video configurations easily. This is particularly beneficial for those who may not be well-versed in home theater technology.

In terms of design, the AVR 110 boasts a modern and minimalist aesthetic, with a classic black finish that seamlessly integrates into any home décor. The front panel features a clear display, which provides important information about the current audio and video settings, enhancing usability.

Overall, the Harman-Kardon AVR 110 delivers a well-rounded, high-quality audio and video experience that is ideal for both casual viewers and serious audiophiles. Its combination of powerful performance, advanced technology, and ease of use makes it a competitive option in the world of home theater receivers. Whether watching movies or enjoying music, the AVR 110 is designed to provide an engaging experience that satisfies even the most discerning listeners.