Harman-Kardon AVR 110 Surround Mode Selection, Digital Audio Playback, Selecting a Digital Source

Page 23

Operation

Surround Mode Selection

One of the most important features of the AVR 110 is its ability to reproduce a full multichannel surround-sound field from digital sources, analog matrix surround-encoded programs and standard stereo programs. In all, a total of twelve listening modes are available on the AVR 110.

Selection of a surround mode is based on per- sonal taste, as well as the type of program source material being used. For example, motion pictures or TV programs bearing the logo of one of the major surround-encoding processes, such as Dolby Surround, DTS Stereo or UltraStereo® may be played in either the Dolby Digital, Dolby Pro Logic or Logic 7 Cinema surround modes depending on the source material.

NOTE: Once a program has been encoded with matrix surround information, it retains the sur- round information as long as the program is broadcast in stereo. Thus, movies with surround sound may be decoded via any of the analog surround modes such as Pro Logic or Logic 7, when they are broadcast via conventional TV sta- tions, cable, pay TV and satellite transmission. In addition, a growing number of made-for-televi- sion programs, sports broadcasts, radio dramas and music CDs are also recorded in surround sound. You may view a list of these programs at the Dolby Laboratories Web site at www.dolby.com.

Even when a program is not listed as carrying intentional surround information, you may find that the Pro Logic, Logic 7, VMAx and the Hall or Theater modes often deliver enveloping surround presentations through the use of the natural information present in all stereo recordings. However, for stereo, but not surround programs, we suggest that you experiment with the other modes.

Surround modes are selected using either the front panel controls or the remote. To select a surround mode from the front panel, press the Surround Mode Selector 7 to scroll up or down through the list of available modes. To select a surround mode using the remote, press the Surround Mode Selectorj and then press the Ú/ Û buttons mq to change the mode. As you press the buttons, the Surround mode name will appear in the Main Information Display W, and an individual mode indicator will also light up CDFHI JKL. As the surround modes change, a

green LED will light next to the current mode in the Surround Mode Indicators list ÷ on the front panel.

Note that the Dolby Digital and DTS modes may only be selected when a digital input is in use. In addition, when a digital source is present, the AVR 110 will automatically select and switch to the correct mode (Dolby Digital or DTS), regardless of the mode that has been pre- viously selected. For more information on select- ing digital sources, see the following section of this manual.

To listen to a program in traditional two-channel stereo, using the front-left and front-right speakers only (plus the subwoofer if installed and configured), follow the instructions shown above for using the remote until SURR OFF appears in the Main Information Display W.

Digital Audio Playback

Digital audio is a major advancement over older systems such as Dolby Pro Logic. It delivers five discrete channels: left-front, center, right-front, left-surround and right-surround. Each channel reproduces full frequency range (20Hz to 20kHz) and offers dramatically improved dynamic range and significant improvements to signal-to-noise ratios. In addition, digital systems have the capa- bility to deliver an additional channel that is specifically devoted to low-frequency information. This is the “.1” channel referred to when you see these systems described as “5.1”. The bass chan- nel is separate from the other channels, but since it is intentionally bandwidth-limited, sound designers have given it that unique designation.

Dolby Digital

Dolby Digital (originally known as AC-3®) is a standard part of DVD, and is available on specially encoded LD discs and satellite broad- casts and is a part of the new high-definition tel- evision (HDTV) system.

Note that an optional, external RF demodulator is required to use the AVR 110 to listen to the Dolby Digital soundtracks available on laser discs. Connect the RF output of the LD player to the demodulator and then connect the digital output of the demodulator to the Optical or Coaxial Inputs gh#$ of the AVR 110. No demodulator is required for use with DVD players or DTS-encoded laser discs.

DTS

DTS is another digital audio system that is capable of delivering 5.1 audio. Although both DTS and Dolby Digital are digital, they use dif- ferent methods of encoding the signals, and thus they require different decoding circuits to convert the digital signals back to analog.

DTS-encoded sound tracks are available on select DVD and LD discs, as well as on special audio-only DTS discs. You may use any LD or CD player equipped with a digital output to play DTS-encoded discs with the AVR 110. All that is required is to connect the player’s output to either the Optical or Coaxial Input on the rear panel gh or front panel #$.

In order to listen to DVDs encoded with DTS sound tracks, the DVD player must be compati- ble with the DTS signal as indicated by a DTS logo on the player’s front panel. Note that early DVD players may not be able to play DTS- encoded DVDs. This does not indicate a prob- lem with the AVR 110, as some players cannot pass the DTS signal through to the digital out- puts. If you are in doubt as to the capability of your DVD player to handle DTS discs, consult the player’s owner’s manual.

Selecting a Digital Source

To utilize either digital mode you must have properly connected a digital source to the AVR 110. Connect the digital outputs from DVD players, HDTV receivers, satellite systems or CD players to the Optical or Coaxial Inputs gh#$. In order to provide a backup sig- nal and a source for analog stereo recording, the analog outputs provided on digital source equipment should also be connected to their appropriate inputs on the AVR 110 rear panel (e.g., connect the analog stereo audio output from a DVD to the DVD Audio inputs ¤ on the rear panel when you connect the source’s digital outputs).

When playing a digital source such as DVD, first select the input using the remote or front panel controls as outlined in this manual. Next, select the digital source by pressing the Digital Input Selector button pò and then using the Ú/Û buttons mq on the remote or the Selector buttons 5 on the front panel to choose any of the OPTICAL or COAXIAL inputs, as they appear in the Main Information Display W, or Source Indicators BE. When the digital source is

23OPERATION

Page 22 Page 24
Image 23
Page 22 Page 24
Contents AVR 110 Audio/Video Receiver AVR 110 Audio/Video Receiver Multiple Digital Inputs and Outputs Description and FeaturesIntroduction While complex digital systems are hardUnpacking Safety InformationImportant Safety Information Front Panel Controls Set Button ð Input Indicators ñ DelaySee Preset Stations Selector Press thisFront Panel Information Display Theater Mode IndicatorNight Mode Indicator Front Panel Information Display Tape Inputs Surround Speaker Outputs Tape Outputs Switched AC Accessory OutletRear Panel Connections See page 14 for more information on speaker polarity OFF Remote Control FunctionsRemote Control Functions Speaker Select Press this button Preset Up/Down When the tuner isConnect the analog output of a CD player to the CD inputs ¥ Installation and ConnectionsSystem Installation Audio Equipment ConnectionsAC Power Connections System and Power ConnectionsRemote Control Extension Speaker Placement System ConfigurationSpeaker Selection and Placement Speaker Configuration System SetupPlug the Power Cord ¡ into an unswitched AC outlet If no subwoofer is connected to Output Level AdjustmentLights up Delay SettingsPress the Set button oï Adjust the delay time by pressing To set the delay times, follow these stepsWand the PRO Logic indicator F lights up Source Selection OperationBasic Operation Surround Mode Chart Dolby Digital Surround Mode SelectionDigital Audio Playback Selecting a Digital SourceOr PCM Digital Status IndicatorsAddition to the bitstream indicators, Night ModeStation Selection Tuner OperationPCM Audio Playback MP3 Audio PlaybackDisplay Brightness Output Level Trim AdjustmentTape Recording Programming the Remote Programming the RemotePress the AVR Selector f Erasing Macro CommandsMode Selector/Channel Down button j Macro ProgrammingTransport Control Punch-Through Volume Punch-ThroughChannel Control Punch-Through Reassigning Device Control Selectors Resetting the Remote MemoryFunction List Skip Preset UpPreset Down Tune DownSetup Code Table TV 001 011 033 042 044 100 154 160 167 168 001 074 148011 013 069 001 011 033 044 050 074Setup Code Table VCR 002 020 037 039 040 071037 039 040 058 071 075 087 019 027 052Setup Code Table CD 047 054 055 056 091 093 102 103 106 162 163 164 013 107120 124 022 047 079 091 148Setup Code Number Setup Code Table DVDSetup Code Table SAT Setup Code Table CBL 001 188 063 115 187037 072 186 003 018 047 048 052 130 145 183 203Lights, motors or other electrical appliances Troubleshooting GuideProcessor Reset Information from nonencoded programsTechnical Specifications Page Page Page Harman Kardon, Incorporated Part No. J90200012600 Page Page Page Page Page Page

AVR 110 specifications

The Harman-Kardon AVR 110 is a versatile audio/video receiver designed for those seeking to enhance their home entertainment experience. Renowned for its sleek design and impressive sound quality, the AVR 110 is a reliable choice for anyone looking to create a home theater system.

At the core of the AVR 110 is its ability to deliver a rich, immersive audio experience. With a power output of 100 watts per channel, this receiver can fill a room with high-fidelity sound that caters to both music enthusiasts and movie lovers alike. The AVR 110 features a high-current, low-impedance design, which ensures that it can drive a wide range of speaker types and configurations without sacrificing performance.

One of the standout features of the AVR 110 is its advanced processing capabilities. It supports Dolby Digital and DTS formats, providing an authentic surround sound experience that brings films and music to life. The Dolby Pro Logic II technology also allows for expanded sound fields, making it possible to enjoy stereo recordings in a simulated surround sound format.

The AVR 110 is equipped with multiple audio and video inputs, making it easy to connect a variety of devices, including DVD players, gaming consoles, and streaming devices. This level of connectivity is complemented by a built-in AM/FM tuner, allowing users to explore radio programming as well. Additionally, the receiver features composite and component video switching, ensuring high-quality video signals for optimal viewing experiences.

Another notable characteristic of the AVR 110 is its user-friendly interface. The GUI (Graphical User Interface) simplifies navigation through various settings, allowing users to customize their audio and video configurations easily. This is particularly beneficial for those who may not be well-versed in home theater technology.

In terms of design, the AVR 110 boasts a modern and minimalist aesthetic, with a classic black finish that seamlessly integrates into any home décor. The front panel features a clear display, which provides important information about the current audio and video settings, enhancing usability.

Overall, the Harman-Kardon AVR 110 delivers a well-rounded, high-quality audio and video experience that is ideal for both casual viewers and serious audiophiles. Its combination of powerful performance, advanced technology, and ease of use makes it a competitive option in the world of home theater receivers. Whether watching movies or enjoying music, the AVR 110 is designed to provide an engaging experience that satisfies even the most discerning listeners.
Top Page Image Contents