Harman-Kardon 660, 760 You are now ready to begin enjoying your new receiver, Adjust Lip Sync

Page 29

Adjust Lip Sync: Resynchronizes the audio and video signals from a source to eliminate a “lip sync” problem. Lip sync issues can occur when the video portion of a signal undergoes additional processing in either the source or the video display. The Lip Sync adjuster appears by itself, enabling you to view the video while listening to the audio. Use the M N Buttons to delay the audio by up to 180ms. See Figure 23.

Figure 23 – Adjust Lip Sync

Input Level From Source: This setting defaults to 0dB for all sources. If you notice that one device tends to sound louder or softer than other sources in your system, use the M N Buttons to adjust the input level from the source to compensate for the volume difference without compressing or distorting the signal. This setting is not the same as the Dolby Volume setting in the Audio Effects menu, which adjusts for volume differences within the source, e.g., television commercial advertisements versus the main program. See page 30 for information on the Dolby Volume setting.

Audio Auto Polling: Used when both analog and digital audio connections are made. When no digital signal is present, the AVR will automatically switch to the analog audio input.

This can be useful for older cable television systems that broadcast channels in both analog and digital audio.

If an analog audio connection was made, select it here. If not, choose the Off setting, and the AVR will always use the digital audio connection.

INITIAL SETUP

Zone 2 Audio: Determines the audio source for the multizone system remote zone. Select the analog audio input the source is connected to. Digital audio is not available to the multizone system.

Zone 2 Video: Determines the video source for the multizone system remote zone. Select the composite video input the source is connected to. Only composite video sources are available to the multizone system (AVR 760 only).

Trigger 2: Determines whether a signal will be present at the Trigger 2 Output when this source is selected.

Record Out: Determines the signal available at the analog audio outputs.

•• Analog: Passes through the analog audio signal selected as the source input.

•• DSP Downmix: When a multichannel audio source is selected as the input, the AVR creates a 2-channel “LtRt” analog downmix of the signal.

Press the Back/Exit Button, then return to the Setup Source line of the Main Menu to configure the next source. When you have finished, press the Back/ Exit Button to clear the menus from view.

You are now ready to begin enjoying your new receiver!

ENGLISH

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents AVR 760/AVR Important Safety Information Safety InformationImportant Safety Instructions Cleaning Installation LocationDo Not Open the Cabinet Moving the UnitTable of Contents Thank you for choosing a Harman Kardon product IntroductionAudio Section Surround ModesAudio Inputs Supplied AccessoriesAudio/Video Inputs Digital Audio InputsFRONT-PANEL Controls Setting 480i, 480p, 576i, 720p, 1080i or 1080pVolume Knob Turn this knob to raise or lower the volume Output REAR-PANEL ConnectionsUse an HDMI-to-DVI adapter Main Remote Control Remote Control FunctionsVolume Control Press to raise or lower the volume Zone 2 Remote Control Typical Home Theater System Introduction to Home TheaterMultichannel Audio Surround ModesConnections Connecting Source Devices to the AVRSpeaker Connections SubwooferAnalog Audio Digital AudioRS-232 Serial Port AntennasVideo Connections Digital VideoSubwoofer Placement Speaker PlacementFront Speaker Placement Source Assignment Worksheet Getting StartedGetting Started Installation Connect a Video Display Device or Switcher AVR 760 only Step Eleven Install a Multizone SystemConnect IR Control Devices to the Zone 2 IR Input Select one or all of these methods for audio distributionStep Thirteen Insert Batteries in Remote Step Twelve Plug in AC Power CordsStep Fourteen Program Sources Into the Remote To program the codes for a source device into the remoteTo learn individual key codes To change the device type of a Source SelectorStep Fifteen Turn On the AVR 760/AVR 660 To delete a programmed or learned codeTo rename a key or device Select Automatic Setup-EzSet/EQ Initial SetupUsing the On-Screen Menu System Audio and Video Input Selection Set Up SourcesSelect Cancel to return to the Speaker Setup menu HDMI-Equipped Multichannel Disc Player Channel InputsYou are now ready to begin enjoying your new receiver Adjust Lip SyncDolby Volume Volume ControlDolby Volume Calibration Offset OperationHeadphones Sleep TimerMute Function Audio EffectsRDS Tuning Using the TunerRDS Operation RDS Display OptionsInternet Radio USB PlaybackUsing The Bridge Using Docking StationNetwork Playback RecordingUsing The Bridge II in iPod Manual Mode IPod manual modeSelect Menu Select Next ScreenSelecting a Surround Mode Memory Troubleshooting GuideProcessor Reset Appendix Appendix Default settingsTable A1 Recommended Source Component Connections Device TypeTable A2 Source Setting Defaults FM Tuner Section Technical SpecificationsAM Tuner Section Video SectionEnglish

660, 760 specifications

Harman-Kardon has long been a name synonymous with high-fidelity audio products, and among its most iconic offerings are the Harman-Kardon 660 and 760 models. These models exemplify the brand's commitment to delivering superior sound quality, cutting-edge technologies, and striking aesthetics.

The Harman-Kardon 660 is recognized for its robust construction and powerful sound output. This model integrates advanced audio technologies such as Harman’s proprietary Harman Tune technology, which optimizes sound performance based on the acoustic environment. This ensures a rich and immersive audio experience, allowing listeners to enjoy their favorite music at its best.

With a sleek design highlighted by its distinctive curves and premium materials, the 660 is not only a practical addition to any audio setup but also a stylish one. It features a powerful amplifier that can drive high-performance speakers, providing a dynamic range that brings music to life. The inclusion of Bluetooth connectivity allows users to stream music effortlessly from their devices, making it suitable for modern listening habits.

On the other hand, the Harman-Kardon 760 takes audio performance to the next level. Building upon the features of its predecessor, the 760 includes an even more powerful amplifier, enhanced audio processing capabilities, and an expanded range of connectivity options. This model supports various audio formats, ensuring compatibility with other high-resolution audio sources and streaming services.

One of the standout characteristics of the 760 is its multi-room capability, which enables users to connect multiple speakers throughout their home. The system can be controlled via a user-friendly app, allowing for seamless navigation and personalized listening experiences. Additionally, the 760 employs advanced DSP (Digital Signal Processing) technology, which further refines audio fidelity and clarity, delivering a studio-quality sound.

Both models feature elegant touch controls and an intuitive interface, making it easy to navigate through playlists and settings. They also prioritize energy efficiency, ensuring that the products are environmentally friendly without sacrificing performance.

In summary, the Harman-Kardon 660 and 760 models represent the pinnacle of audio innovation, combining high-quality sound, stylish design, and modern technology. Whether for casual listening or serious audiophile experiences, these models provide an exceptional audio journey that meets the needs of diverse listeners.
Top Page Image Contents