Harman-Kardon 760, 660 owner manual Digital Audio, Analog Audio

Page 16

CONNECTIONS

Digital Audio

The AVR 760/AVR 660 is equipped with four HDMI (High-Definition Multimedia Interface) inputs, and one output. HDMI technology enables digital audio and video information to be carried using a single cable, delivering the highest quality picture and sound.

The AVR 760/AVR 660 uses HDMI (V.1.3a with Deep Color) technology and is capable of processing both the audio and video components of the HDMI data, minimizing the number of cable connections in your system. The AVR 760/AVR 660 implements Deep Color, which increases by an order of magnitude the shades of color that can be displayed, and the latest lossless multichannel audio formats, including Dolby TrueHD and DTS-HD Master Audio.

NOTE: Some DVD-Audio, SACD, Blu-ray Disc and HD-DVD players only output multichannel audio through their multichannel analog outputs. Make a separate analog audio connection in addition to the HDMI connection, which is still used for video and to listen to Dolby Digital, DTS or PCM materials that may be stored on the disc.

The AVR 760/AVR 660 converts analog video signals to the HDMI format, including its on-screen menus, upscaling to high-definition 1080p resolution.

The HDMI connector is shaped for easy plug-in (see Figure 4). If your video display has a DVI input and is HDCP-compliant, use an HDMI-to-DVI adapter (not included). A separate audio connection is required. HDMI cable runs are limited to about 3 meter.

Figure 4 – HDMI Connection

If your video display or source device is not HDMI-capable, use one of the analog video connections (composite, S- or component video) and a separate audio connection.

Coaxial digital audio jacks are usually color-coded in orange. Although they look similar to analog jacks, you should not connect coaxial digital audio outputs to analog inputs or vice versa. See Figure 5.

Coaxial digital

Coaxial

 

audio cable

 

Figure 5 – Coaxial Digital Audio

Optical digital audio connectors are normally covered by a shutter to protect them from dust. The shutter opens as the cable is inserted. Input connectors are color-coded using a black shutter, while outputs use a gray shutter. See Figure 6.

Optical digital

Optical

 

audio cable

 

Figure 6 – Optical Digital Audio

Analog Audio

Analog connections require two cables, one for the left channel (white) and one for the right channel (red). These two cables are often attached to each other. See Figure 7.

For sources that are capable of both digital and analog audio, you may make both connections.

The analog audio connection is required for multizone operation, as the AVR 760/AVR 660’s multizone system is not capable of converting a digital signal to analog format. Use the analog audio connections even with the Surround Back/Zone 2 speaker outputs, in case another 2-channel digital audio source is in use in the main listening area. The AVR 760/AVR 660 is only capable of processing one PCM source at a time.

You may only record materials from DVDs or other copy-protected sources using analog connections. Remember to comply with all copyright laws, if you choose to make a copy for your own personal use.

Analog audio

L

 

cable (RCA)

R

 

Figure 7 – Analog Audio

Multichannel analog connections are used with high-definition sources that decode the copy-protected digital content, such as some DVD-Audio, SACD, Blu-ray Disc and HD-DVD players. See Figure 8. The multichannel analog audio connection is not required for players compliant with HDMI version 1.1 or better, or that output linear PCM signals via an HDMI connection. Consult the owner’s guide for your disc player for more information.

 

Front

Surround

Center

Multichannel

White

Blue

Green

analog audio

 

 

 

cable (RCA)

 

 

Subwoofer

 

Red

Gray

Purple

Figure 8 – Multichannel Analog Audio

The AVR 760/AVR 660 also includes a proprietary, dedicated audio connection for The Bridge II docking station for iPod. If you own a docking iPod (most models, 4G or later), connect The Bridge II (included) to The Bridge II port on the receiver. See Figure 9. Dock your iPod (not included) in The Bridge II, and you may listen to your audio materials through your high-performance audio system. You may view still images or video materials stored on a photo- or video-capable iPod that supports video browsing. Use the AVR 760/AVR 660 remote to control the iPod, with navigation messages displayed on the front panel and on a video display connected to the AVR. The Bridge II outputs analog audio to the AVR 760/AVR 660, and is available to the multiroom system.

THE BRIDGE Figure 9 –  The Bridge II port

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents AVR 760/AVR Important Safety Instructions Safety InformationImportant Safety Information Installation Location CleaningDo Not Open the Cabinet Moving the UnitTable of Contents Introduction Thank you for choosing a Harman Kardon productAudio Section Surround ModesSupplied Accessories Audio InputsAudio/Video Inputs Digital Audio InputsSetting 480i, 480p, 576i, 720p, 1080i or 1080p FRONT-PANEL ControlsVolume Knob Turn this knob to raise or lower the volume REAR-PANEL Connections OutputUse an HDMI-to-DVI adapter Remote Control Functions Main Remote ControlVolume Control Press to raise or lower the volume Zone 2 Remote Control Introduction to Home Theater Typical Home Theater SystemMultichannel Audio Surround ModesConnecting Source Devices to the AVR ConnectionsSpeaker Connections SubwooferDigital Audio Analog AudioAntennas RS-232 Serial PortVideo Connections Digital VideoFront Speaker Placement Speaker PlacementSubwoofer Placement Getting Started Source Assignment WorksheetGetting Started Installation Step Eleven Install a Multizone System Connect a Video Display Device or Switcher AVR 760 onlyConnect IR Control Devices to the Zone 2 IR Input Select one or all of these methods for audio distributionStep Twelve Plug in AC Power Cords Step Thirteen Insert Batteries in RemoteStep Fourteen Program Sources Into the Remote To program the codes for a source device into the remoteTo change the device type of a Source Selector To learn individual key codesTo rename a key or device To delete a programmed or learned codeStep Fifteen Turn On the AVR 760/AVR 660 Using the On-Screen Menu System Initial SetupSelect Automatic Setup-EzSet/EQ Select Cancel to return to the Speaker Setup menu Set Up SourcesAudio and Video Input Selection Channel Inputs HDMI-Equipped Multichannel Disc PlayerAdjust Lip Sync You are now ready to begin enjoying your new receiverVolume Control Dolby VolumeDolby Volume Calibration Offset OperationSleep Timer HeadphonesMute Function Audio EffectsUsing the Tuner RDS TuningRDS Operation RDS Display OptionsUSB Playback Internet RadioUsing Docking Station Using The BridgeNetwork Playback RecordingIPod manual mode Using The Bridge II in iPod Manual ModeSelect Menu Select Next ScreenSelecting a Surround Mode Processor Reset Troubleshooting GuideMemory Appendix Default settings AppendixTable A1 Recommended Source Component Connections Device TypeTable A2 Source Setting Defaults Technical Specifications FM Tuner SectionAM Tuner Section Video SectionEnglish

660, 760 specifications

Harman-Kardon has long been a name synonymous with high-fidelity audio products, and among its most iconic offerings are the Harman-Kardon 660 and 760 models. These models exemplify the brand's commitment to delivering superior sound quality, cutting-edge technologies, and striking aesthetics.

The Harman-Kardon 660 is recognized for its robust construction and powerful sound output. This model integrates advanced audio technologies such as Harman’s proprietary Harman Tune technology, which optimizes sound performance based on the acoustic environment. This ensures a rich and immersive audio experience, allowing listeners to enjoy their favorite music at its best.

With a sleek design highlighted by its distinctive curves and premium materials, the 660 is not only a practical addition to any audio setup but also a stylish one. It features a powerful amplifier that can drive high-performance speakers, providing a dynamic range that brings music to life. The inclusion of Bluetooth connectivity allows users to stream music effortlessly from their devices, making it suitable for modern listening habits.

On the other hand, the Harman-Kardon 760 takes audio performance to the next level. Building upon the features of its predecessor, the 760 includes an even more powerful amplifier, enhanced audio processing capabilities, and an expanded range of connectivity options. This model supports various audio formats, ensuring compatibility with other high-resolution audio sources and streaming services.

One of the standout characteristics of the 760 is its multi-room capability, which enables users to connect multiple speakers throughout their home. The system can be controlled via a user-friendly app, allowing for seamless navigation and personalized listening experiences. Additionally, the 760 employs advanced DSP (Digital Signal Processing) technology, which further refines audio fidelity and clarity, delivering a studio-quality sound.

Both models feature elegant touch controls and an intuitive interface, making it easy to navigate through playlists and settings. They also prioritize energy efficiency, ensuring that the products are environmentally friendly without sacrificing performance.

In summary, the Harman-Kardon 660 and 760 models represent the pinnacle of audio innovation, combining high-quality sound, stylish design, and modern technology. Whether for casual listening or serious audiophile experiences, these models provide an exceptional audio journey that meets the needs of diverse listeners.
Top Page Image Contents