Open a Nearby Soft Water Faucet

GE GXSF31E Open a Nearby Soft Water Faucet, If the code was changed, make ALL the timer settings

GEAppliances.com

Service: Manually Initiated Electronics Diagnostics

1.To enter diagnostics, press and hold the MODE button until (000 – –) shows in the display.

A The first 3 digits indicate water meter operation as follows:

■000 (steady) = soft water not in use…no flow through the meter.

Turbine Switches

Water	Switch (B)
Meter (A)

C While in this diagnostic screen, the following information

is available and may be beneficial for various reasons.

This information is retained by the computer from the

first time electrical power is applied to the control.

■ Press and hold the UP button to display the number

of days this control has had electrical power applied.

■ Press and hold the DOWN button to display the

number of regenerations initiated by this control

—OPEN A NEARBY SOFT WATER FAUCET—

■000 to 199 (continual) = repeats display for each gallon of water passing through the meter.

Motor

Position

switch

Sensor

housing Turbine

Valve	Turbine support
Valve	and shaft
outlet

If you don’t get a reading in the display, with faucet open, pull the sensor from the valve outlet port. Pass a small magnet back and forth in front of the sensor. You should get a reading in the display. If you get a reading, shut off water supply, unhook the in and out plumbing and check the turbine for binding.

BThe letter (P) and dash(es) indicate POSITION switch operation. The letter appearing means the switch is closed; the dash means the switch is open. Use the

RECHARGE (RECHARGE TONIGHT–RECHARGE NOW) button to manually advance the valve into each cycle and check correct switch operation.

CORRECT SWITCH
DISPLAYS	VALVE CYCLE STATUS

—— Valve in service, fill, brining, backwash or fast rinse position.

— P	Valve rotating from one position to another

since the SR code number was entered.

2. Press the MODE button and hold in three

seconds until a Service Rating code appears in the display.

For correct water softening system

operation, the model code must be SR22 for model GXSF27E and F31 for model GXSF31E.

To reset the code, press the UP or DOWN button until the correct number shows.

3.Press the MODE button to return to the present time display.

If the code was changed, make ALL the timer settings.

NOTE: If the control is left in a diagnostic display or a flashing display when setting times or hardness, present time automatically returns if a button is not pressed within four minutes.

GXSF31E specifications

The GE GXSF31E is a state-of-the-art water filtration system that effectively addresses the need for clean and great-tasting water in residential applications. This model focuses on efficiency, reliability, and advanced filtration technologies that enhance water quality for everyday use.

One of the main features of the GE GXSF31E is its robust filtration capabilities. It utilizes a dual-stage filtration process that combines sediment filtration with activated carbon block technology. This dual approach not only removes common contaminants such as chlorine, sediment, and rust but also significantly improves the taste and odor of your water. As a result, users enjoy water that is not only safe but also refreshing and pleasant to drink.

In terms of capacity, the GE GXSF31E is designed to meet the needs of medium to large households. With a production capacity of up to 31,000 grains, it is capable of efficiently handling the water demands of families with multiple members. The system features a digital control panel that allows users to monitor and manage the filtration process effectively, providing alerts for filter replacements and ensuring optimal performance at all times.

The GE GXSF31E also incorporates advanced technologies for ease of maintenance. The unit is equipped with a self-cleaning mechanism that helps reduce the need for manual cleaning, thereby extending the lifespan of the filters and the system as a whole. This feature significantly enhances convenience, as homeowners can rely on the unit to maintain its efficiency without constant intervention.

Energy efficiency is another critical characteristic of the GE GXSF31E. The system is designed to operate with minimal energy consumption, making it an environmentally friendly choice for responsible consumers. Additionally, its compact design allows for easier installation and integration into limited spaces, which is particularly advantageous for urban settings.

The GE GXSF31E not only meets rigorous safety standards but also comes with a warranty that underscores its reliability and long-lasting performance. This product is ideal for families looking to improve their water quality with a dependable, efficient, and user-friendly filtration system that aligns with modern needs and environmental considerations.