GE GXSF31E Salty tasting or, Brown/yellow colored Water after installation, Water has air bubbles

Page 20

Before you call for service…

Troubleshooting Tips

Problem

Possible Causes

What To Do

Salty tasting or

Unit not sanitized

brown/yellow colored

 

water after installation

 

Complete the Sanitization Procedures on page 10.

At completion of recharge cycle (approx. 2 hrs), run water from faucets to purge the salty water.

 

Low water pressure

Check pressure; should be minimum 20 psi.

 

 

 

 

Restricted drain hose

Clean and reconnect hose.

 

 

Check for kinks in drain line.

 

 

 

Brown/yellow

Unit was idle for a period of time

Complete the Sanitization Procedures on page 10.

colored water

 

 

 

 

 

Resin beads showing

Cracked distributor

Call for service.

up in drinking water

 

 

and sink

 

 

 

 

 

Sounds you might hear

Running water from the unit

This is normal.

 

into a drain during recharge

 

 

 

 

Water has air bubbles

Air in system after installation

Will go away after it runs for a while.

and is cloudy

 

 

Error Code on control Wiring may have worked loose in the control

See page 14 for details.

Unplug transformer.

Remove control cover, release clips on side.

Check for loose/incorrect wiring connections to electronic board or switch. Reconnect as required.

Reassemble control cover.

Plug in Transformer.

Wait six minutes for Error Code to reappear.

If Error Code reappears, call for service.

20

Image 20
Contents 7247182 215C1044P021 49-50083-104-02 JR Write the model and serial numbers here Model # Serial #Safety Precautions Unpacking and Inspection Installation instructionsImportant Installation Recommendations Tools and Materials Required for Installation Plan How You Will Install the SoftenerWhere to Install the Softener Typical Installation Illustration Optional 3-Valve Bypass Installation IllustrationStep-by-step installation instructions Install Bypass ValveMove the Softener Assembly Into Installation Position Plumb in and OUT Pipes to and from Softener4A. Connecting a Rigid Valve Drain Tube Install the Brine Tank Overflow Fittings and HoseInstall Grounding Clamp Connect to Electrical PowerProgramming the Control SET Present Time of DAYSET Water Hardness Number SET Recharge Starting TimeOptional Control Settings Error SignalsSYSTEM/ELECTRONIC Diagnostics Salt EfficiencySanitizing Procedures Specifications/DimensionsAbout the water softener system Do not overtighten the cap Cleaning the Nozzle and Venturi AssemblyBreaking a Salt Bridge Feature Optional Recharge Controls Feature MemoryFeature/Service Automatic Electronic Diagnostics Normal Operation, Control DisplaysService Electronic Demand Time Features and Service Service Timer/Softener, Service Checkout ProcedurePossible Defect Visual ChecksIf the code was changed, make ALL the timer settings Open a Nearby Soft Water FaucetIf the water softening system does not draw brine, check Care and cleaning of the water softening system Cleaning Iron Out of the Water Softening SystemChecking the Salt Storage Level and Refilling However, you must keep the tank supplied with saltThat does not mix soft and hard water Before you call for service…Problem Possible Causes What To Do No soft water After installation Not using any saltWater feels slippery Water softening systemBrown/yellow colored Water after installation Salty tasting orBrown/yellow Colored water Resin beads showingGEAppliances.com Parts list GEAppliances.com Parts catalog General Electric Parts CatalogSupport Screen Warrantor General Electric Company. Louisville, KY What Is Not CoveredFor The Period Of We Will Replace GE Water Softening System Warranty. For Customers in Canada For The Period We Will ReplacePage Información de seguridad Instrucciones para la Advertencia Advertencia No use con agua queInstrucciones de instalación Advertencia No use conDesempacado e inspección Recomendaciones importantes para la instalaciónHerramientas y materiales necesarios para la instalación Planifique la instalación del DescalcificadorDónde instalar el Descalcificador Ilustración de instalación normal PrincipalInstrucciones de instalación paso por paso Instale LA Válvula DE BypassDE LA Válvula 4A. Cómo Conectar UN Tubo DE Drenaje DE Válvula RígidaConecte EL Suministro Eléctrico Instale LA Abrazadera DE TierraAgregue Agua Y SAL AL Tanque DE Salmuera Programación del control Ajuste LA Hora DEL DÍAAjuste EL Nivel DE Dureza DEL Agua Ajuste LA Hora DE Inicio DE RecargaSeñales DE Error Ajustes opcionales de controlDiagnóstico ELECTRÓNICO/DEL Sistema Eficiencia DE LA SALEspecificaciones/Dimensiones Procedimientos de desinfecciónSobre el sistema de descalcificación de agua Cómo romper un puente de sal Cómo limpiar la ensambladura de la boquilla y el Venturi Junta Tapón de flujoOperación normal, Pantalla de control Función MemoriaCaracterística/Servicio Diagnóstico electrónico automático Recargue Esta NocheVisualizado Inspecciones VisualesServicio Diagnóstico electrónico iniciado manualmente Servicio Inspección manual del avance de la racarga Recharge recargoPrecaución No HAY Agua Descalcificada Problemas más comunes Antes de llamar para solicitar servicio…Que el problema haya sido corregido Está duraEl agua sabe a sal o tiene Notas Notas Notas Lista de partes GEAppliances.com Catálogo de partes Catálogo DE Partes DE General ElectricPASADOR, Expansión Garantía GE para el Sistema de Descalcificación de Agua Por el período de ReemplazamosLo que no está cubierto Garante General Electric Company. Louisville, KYSoporte al Consumidor Página Web de GE Appliances Solicite una reparaciónGarantías ampliadas Piezas y accesoriosSchedule Service Parts and AccessoriesConsumer Support GE Appliances Website Real Life Design Studio

GXSF31E specifications

The GE GXSF31E is a state-of-the-art water filtration system that effectively addresses the need for clean and great-tasting water in residential applications. This model focuses on efficiency, reliability, and advanced filtration technologies that enhance water quality for everyday use.

One of the main features of the GE GXSF31E is its robust filtration capabilities. It utilizes a dual-stage filtration process that combines sediment filtration with activated carbon block technology. This dual approach not only removes common contaminants such as chlorine, sediment, and rust but also significantly improves the taste and odor of your water. As a result, users enjoy water that is not only safe but also refreshing and pleasant to drink.

In terms of capacity, the GE GXSF31E is designed to meet the needs of medium to large households. With a production capacity of up to 31,000 grains, it is capable of efficiently handling the water demands of families with multiple members. The system features a digital control panel that allows users to monitor and manage the filtration process effectively, providing alerts for filter replacements and ensuring optimal performance at all times.

The GE GXSF31E also incorporates advanced technologies for ease of maintenance. The unit is equipped with a self-cleaning mechanism that helps reduce the need for manual cleaning, thereby extending the lifespan of the filters and the system as a whole. This feature significantly enhances convenience, as homeowners can rely on the unit to maintain its efficiency without constant intervention.

Energy efficiency is another critical characteristic of the GE GXSF31E. The system is designed to operate with minimal energy consumption, making it an environmentally friendly choice for responsible consumers. Additionally, its compact design allows for easier installation and integration into limited spaces, which is particularly advantageous for urban settings.

The GE GXSF31E not only meets rigorous safety standards but also comes with a warranty that underscores its reliability and long-lasting performance. This product is ideal for families looking to improve their water quality with a dependable, efficient, and user-friendly filtration system that aligns with modern needs and environmental considerations.