Brother CS 8060 manual Needle and presser foot section Right-side/rear view, Getting Ready

Page 4

——————————————————————————————————————— Names of Machine Parts and Their Functions

Needle and presser foot section

1

Right-side/rear view

1

CONTENTS

7
6	5
	5

2

3

4

2

3

7

46

5

GETTING READY

1Buttonhole lever

Lower the buttonhole lever when sewing buttonholes and bar tacks.

2Needle bar thread hook

Pass the upper thread through the needle bar thread hook.

3Needle plate

The needle plate is marked with guides for sewing straight seams.

4Bobbin cover/shuttle

Remove the bobbin cover, and then insert the bobbin into the shuttle.

5Feed dogs

The feed dogs feed the fabric in the sewing direction.

6Presser foot

The presser foot applies pressure consistently on the fabric as the sewing takes place. Attach the appropriate presser foot for the selected stitching.

7Presser foot holder

The presser foot is installed onto the presser foot holder.

1Handle

Carry the sewing machine by its handle when transporting the machine.

2Balance wheel

Turn the balance wheel toward you to raise and lower the needle to sew one stitch.

3Main power switch

Use the main power switch to turn the sewing machine on and off.

4Power supply jack

Insert the plug on the power supply cord into the power supply jack.

5Foot controller jack

Insert the plug on the end of the foot controller cable into the foot controller jack.

6Air vent

The air vent allows the air surrounding the motor to be exchanged. Do not cover the air vent while the sewing machine is being used.

7Feed dog position switch

Use the feed dog position switch to lower the feed dogs.

Memo

●Refer to Cover B, D or E pages while you are learning to use your machine.

SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

Cover C

Image 4

Contents

Page Enclosed Accessories AccessoriesNames of Machine Parts and Their Functions Front viewNeedle and presser foot section Right-side/rear view Getting ReadyContents Getting Ready Operation buttonsOperation panel StitchesOptional Accessories Following are available as optional accessoriesSewing Machine Features IntroductionContents Adjusting the Thread Tension Adjusting the Stitch Width and LengthSewing Useful Sewing TipsStitch Settings MaintenanceTroubleshooting Error messagesImportant Safety Instructions For Users in the UK, EIRE, Malta and Cyprus only Congratulations on Choosing OUR Machine Getting Ready Power supply precautions Turning the Machine On/Off3Unplug the power supply cord from the electrical outlet 4Unplug the power supply cord from the power supply jackTurning on the machine Turning off the machineWinding/Installing the Bobbin Bobbin precautionsWinding the bobbin Move the bobbin thread spool pin up as far as possibleWinding/Installing the Bobbin Thread is cut to a suitable length Thread guide for bobbin winding Two slitsBPress start/stop button once Sewing machine stopsInstalling the bobbin Slide the bobbin cover latch to the right7Reattach the bobbin cover Upper Threading About the spool of threadSpools that can be loaded into the thread cassette Spools that cannot be loaded into the thread cassetteLoading the spool into the thread cassette Upper ThreadingThread cassette is raised Place the spool for the upper thread onto the spool pinFollow arrow 2 indicated on the thread cassette Follow arrow 5 indicated on the thread cassetteThreading the needle Check that the thread cassette indicator is lit up in greenSpool of thread is now loaded in the thread cassette Upper threading is finished Using the extra spool pin 5Close the thread cassette compartment cover1Placepin. the spool of thread onto the extra spool For more details, refer to About the spool of threadExtra spool pin is now installed 3Install a needleRemove the needle Refer to Replacing the needleUsing the twin needle For details, refer to Replacing the needleInstall the twin needle For details, refer to Thread the needle manuallyGetting Ready Pulling up the bobbin thread Refer to steps 1 through 5 of Installing the bobbinInsert the bobbin into the shuttle Needle precautions Replacing the NeedleNeedle types and their uses FabricsCorrect needle Checking the needleIncorrect needle Replacing the needle Install the twin needle in the same way 3Using the screwdriver, loosen the needle clamp screwNeedle is installed 4Lower the needle-changing toolNeedle can be removed from the needle bar 8Lowerneedle.the needle-changing tool offReplacing the Presser Foot Presser foot precautionsReplacing the presser foot Presser foot holder releases the presser foot Presser foot is attachedRemoving the presser foot holder 1Remove the presser foot Removing the presser foot holderFor details, refer to Replacing the presser foot Attaching the walking foot 1Remove the presser foot holder Using the optional walking foot2Turn off the sewing machine 5Attach the presser foot holder For details, refer to Removing the presser foot holderThen,position.install the flap back to its original Sewing Cylindrical PiecesFree-arm sewing Slide the flap off to the leftSewing Basics Sewing General sewing procedure Positioning the fabric Turn on the sewing machine3Place the fabric under the presser foot Fabric is now positioned to be sewnStarting to sew Machine stops sewing with the needle lowered in the fabric Securing the stitching For details, refer to Starting to sew Machine starts sewingMachine stops sewing Machine starts sewing in the normal sewing directionRelease the start/stop button or foot controller Sewing reinforcement stitchesWhen you have finished sewing, cut the threads Cutting the thread2Raise the presser foot lever Threads are cut and the needle is raisedAdjusting the Thread Tension Changing the tension of the upper threadCorrect thread tension Upper thread is too tightAdjusting the Stitch Width and Length Adjusting the stitch widthStitch width adjustment indicator lights up Changing the needle positionAdjusting the stitch length Stitch length adjustment indicator lights upUseful Sewing Tips Trial sewingChanging the sewing direction Sewing curvesSewing thick fabrics Sewing thin fabrics Sewing stretch fabricsSewing an even seam allowance Aligning the fabric with the presser footSewing Basics Utility Stitches When the machine is first turned on, 00 will be displayed Selecting StitchingSelecting stitching Attach the presser footSelecting Stitching Sewing overcasting stitches using overcasting foot G Overcasting StitchesStitch Attach overcasting foot GSewing overcasting stitches using zigzag foot J Preventing fraying center baselineReverse stitching Stretch fabricsSewing overcasting stitches using the optional side cutter Contents Getting Ready SewingLower the presser foot lever, and then start 8Position the fabric in the side cutter9sewing When sewing is finished, cut the thread Basic StitchingBasic stitching PositionSew a blind hem according to the following procedure Blind Hem Stitching3Attach blind hem foot R 4Select a stitchIf the needle catches too much of the hem fold Buttonhole Stitching ButtonholeButtonhole sewing If the button does not fit in the button guide plate Size of the buttonhole is set3Attach buttonhole foot a Pullpossible.down the buttonhole lever as far asFor details, refer to Adjusting the stitch width Changing the stitch widthButton sewing Sewing buttonholes on stretch fabricsTrim off any excess of the gimp thread Feed dogs are lowered5Select stitch 4Place the button into button-sewing foot M9Start Aftersewing.sewing for about 10 seconds at low Zipper Insertion Inserting a centered zipperZipper can be sewn in place Are described below6Select stitch Inserting a side zipper7Topstitch around the zipper 7Select stitch Wrong side of fabric Mm 1/8 inchBTopstitch around the zipper Stretch stitching Sewing Stretch Fabrics and Elastic TapeElastic attaching 3Select stitch Sew the elastic tape to the fabric whileAppliqué, Patchwork and Quilt Stitching QuiltingRemove the thick paper after pressing the seam allowance Appliqué stitching4Attach zigzag foot J Patchwork crazy quilt stitching Edge of the fabric, and sew using stitchPiecing Quilting For details, refer to Using the optional walking footBaste the fabric to be quilted Attach the walking foot Using the optional quilting guide Free-motion quiltingWalking foot Presser foot holder 1Removeholder. the presser foot and the presser foot7After sewing is finished, slide the drop feed 4Slide the drop feed lever, located at the rearNormally, the drop feed lever is positioned at the left Triple stretch stitching Reinforcement StitchingBar tack stitching 5Pullpossible.down the buttonhole lever as far as Eyelet Stitching 3Adjust the stitch width to select the desired eyelet sizeAttach monogramming foot N Decorative Stitching DecorativeFagoting 3Attach zigzag foot J4Select stitch Set the stitch width to 7.0 mm 1/4 inchScallop stitching Smocking4Trim along the stitches 3Sew parallel stitching at intervals of 1 cm 3/8 inchJoining 3Select stitch , orHeirloom stitching 4Sew along the center of the unfrayed section Utility Stitches Stitch Settings Maintenance AppendixStitch Settings Utility stitchesStitch Settings Stitch Width Stitch Length Mm inch Utility Stitches Maintenance Cleaning the machine surfaceCleaning the shuttle Needle plate cover is removedGrasp the shuttle, and then pull it out Remove the shuttleDo not apply oil to the shuttle Presser foot lever is raised Lower the presser foot lever TroubleshootingLoosen the upper thread tension Clean the shuttle Bobbin designed specifically for Correctly install the presser footThere are knots or tangles Needle is bent or blunt Replace the needleNeedle was not raised Press the needle position button. Red GreenStitch is not ShuttleNot feed Fabric doesSewing lamp is damaged Contact your retailer or the nearest Error messages Operation beepChanging the needle stop position Needle stop position changes to the raised positionIndex NumericsIndex English