Speaker Wire Preparation and Connection

Once the proper hookup has been selected using the previous section, make the physical connection using the following instructions.

Cables or Connecting Wire

To assure that the high quality signals produced by your Citation ampliﬁer are car- ried to your speakers without loss of clarity or resolution, we recommend that you use high quality speaker cable. Many brands of cable are available, and the choice of cable may be inﬂuenced by the distance between your speakers and the ampliﬁer, the type of speakers you use, personal preferences, and other factors. Your dealer or installer is a valuable resource to consult in selecting the proper cable for connections between your ampliﬁer and speakers.

Regardless of the brand or type of cable selected, we recommend that you use a cable constructed of ﬁne, multi-strand copper with a AWG of 14 or larger. Remember, that in specifying cable, the lower the number, the thicker the cable.

Cable with an AWG of 16 may be used for short runs of less than ten feet. We do not recommend that you use any cables with an AWG equivalent of 18 or higher due to the power loss and degradation in performance that will occur.

One way to insure that cables will deliver a predictable level of performance is to use cables that are Home THX® certiﬁed. This certiﬁcation assures that the cables have met a rigorous set of speciﬁcations designed for home theater applications.

Cables that are run inside walls should have the appropriate markings to indicate listing with UL, CSA or other testing agency standards. Questions about cables inside walls should be referred to your installer or a licensed electrical contractor who is familiar with the NEC and/or the applicable local building codes in your area.

Connections to Speakers

Regardless of the channel conﬁguration used, the ﬁnal step of the installation process is to connect the ampliﬁer to your speakers, using high quality cable, as outlined above. A pair of binding posts is provided for each channel output. These posts will accept bare wire, spade lugs or banana-type plugs where permitted by local safety agencies.

If bare wire is used for the connections, strip approximately 1/2 inch to 3/4 inch (20mm) of insulation from the end of each wire and carefully twist the strands of each conductor together. Be careful not to cut the individual strands or twist them off; for optimal performance, all strands must be used.

Then, loosen the knobs of the speaker output terminals, far enough so that the pass-through hole is revealed. Note that one conductor of the speaker cable may have no markings, and the other will have a red line, brand name markings, a black thread, or some other positive indication. Follow the proper connection instruc- tions for your system with regard to which terminals are used. The small speaker

5.1 specifications

Harman Kardon has long been recognized as a leader in premium audio systems, and their 5.1 surround sound systems exemplify this prowess. Designed to deliver an immersive home theater experience, the Harman Kardon 5.1 system combines advanced acoustic engineering with cutting-edge technology, ensuring outstanding performance across various genres and media.

One of the standout features of the Harman Kardon 5.1 system is its remarkable sound quality. The system typically comprises five satellite speakers and a powerful subwoofer, all engineered to provide rich, detailed audio. The satellite speakers are designed to handle a wide frequency range, delivering crisp highs, vibrant mids, and deep lows, while the subwoofer enhances the overall experience with thundering bass. This dynamic range enables users to enjoy everything from subtle dialogue in movies to the explosive action scenes that demand a robust audio response.

A key element of the Harman Kardon 5.1 system is its use of advanced audio technologies. Many models feature Dolby Digital and DTS decoding, which ensure that users experience the soundtracks of their favorite films as intended by the creators. These technologies enable the system to create an accurate three-dimensional soundstage that surrounds the listener, making it feel as if they are part of the action. Additionally, certain models come equipped with Harman's proprietary technologies, such as Harman IPS (Intelligent Power Supply) and Advanced Bass Management, which further enhance audio clarity and performance.

User convenience is also a priority for Harman Kardon. Many 5.1 systems support wireless connectivity options, such as Bluetooth and Wi-Fi, allowing users to stream audio from their smartphones, tablets, or computers with ease. This feature expands the system's versatility, making it suitable for both movie watching and music listening.

Design plays an equally important role in the Harman Kardon 5.1 system. The sleek and modern aesthetics of the speakers make them an attractive addition to any home decor. With high-quality materials and finishes, including classy black and white options, these speakers look as good as they sound.

Additionally, setup and integration are designed to be straightforward. Many models include simple connection options and detailed instructions, facilitating quick installation. Some systems even incorporate auto-calibration features, which intelligently adjust speaker levels based on room acoustics, ensuring optimal sound performance without requiring extensive manual tweaking.

In conclusion, the Harman Kardon 5.1 surround sound system represents a fusion of premium audio quality, advanced technologies, and elegant design. Whether used for movie marathons or listening to music, this system caters to audiophiles and casual users alike, making it a popular choice for those seeking a top-tier home theater experience. Its blend of sophistication, performance, and ease of use makes the Harman Kardon 5.1 system a remarkable investment for anyone looking to elevate their audio enjoyment.