Harman-Kardon 5.1 manual Troubleshooting Guide

Page 21

Input/Output Protection

Under some conditions, such as a shorted speaker wire, DC voltage on an input connection or thermal overload, the Citation 5.1 will place itself in a “protect” mode to prevent damage to your speakers. When this happens the power indicator will turn red and no signal will be heard. You may hear a relay “click” on as the unit goes into its protection mode.

When this occurs, turn the unit off using the rear panel switch, and correct the problem. Turn the unit back on. If the unit continues to go into a protect mode, contact your dealer or installer for assistance.

Troubleshooting Guide

The Citation 5.1 is designed for trouble free operation. In normal use, most users will not encounter any problems with the unit. However, as with any sophisticated electronic device, there may be occasional problems on initial installation, or during the life of the unit. The items on this list are a brief guide to the minor problems that you may be able to correct yourself. If these solutions do not rectify a problem, or if the problem persists, contact your dealer, installer or an authorized Citation service center for assistance.

Problem

Diagnosis

Troubleshooting Hints

Page

 

 

 

 

Amplifier will not turn on.

Master Power Switch Turned

Turn on Master Power

8, 19

 

Off. (No Power Light LED)

Switch.

 

 

 

Make certain power cord

8

 

 

is firmly inserted into

 

 

 

receptacle.

 

 

Remote turn-on system not

Check all connections and

8, 9

 

properly configured.

switch settings for remote

 

 

(Power Light LED is amber)

system.

 

 

 

Check External Trigger

9

 

 

Device.

 

Amplifier turns on, but

Inputs not connected to

Check Input Connections.

11-16

no audio from one or

proper jack.

 

 

more channels.

 

 

 

 

Speakers not connected

Check Speaker Connections.

13-18

 

properly.

 

 

 

Improper settings or output

Check the settings on your

Consult the

 

levels from the processor or

preamp, processor or

manual for

 

controller.

controller.

the source

 

 

 

device.

Audio plays, then cuts off.

Amplifier Shorted

Check Speaker connections

13-18

 

(LED is red)

for short circuit.

 

 

 

 

 

21

Image 21
Contents Page Page Table of Contents Do Not Use Extension Cords Important Safety InformationInstallation Location Description IntroductionUnpacking and Installation For more information Rear Panel ConnectionsCitation 7.0 Controller Power Control ConnectionsRemote Turn On Using External AC to DC Power Converter Channel Configurations System Connections AUX Main OUT Input and Bridging ConnectionsTo Processor Three-Channel Operation Two-Channel Operation Speaker Wire Preparation and Connection Page Operation Service Information Troubleshooting Guide THD/IMD SpecificationsStaple or clip original invoice here Part No. CIT5.1OM

5.1 specifications

Harman Kardon has long been recognized as a leader in premium audio systems, and their 5.1 surround sound systems exemplify this prowess. Designed to deliver an immersive home theater experience, the Harman Kardon 5.1 system combines advanced acoustic engineering with cutting-edge technology, ensuring outstanding performance across various genres and media.

One of the standout features of the Harman Kardon 5.1 system is its remarkable sound quality. The system typically comprises five satellite speakers and a powerful subwoofer, all engineered to provide rich, detailed audio. The satellite speakers are designed to handle a wide frequency range, delivering crisp highs, vibrant mids, and deep lows, while the subwoofer enhances the overall experience with thundering bass. This dynamic range enables users to enjoy everything from subtle dialogue in movies to the explosive action scenes that demand a robust audio response.

A key element of the Harman Kardon 5.1 system is its use of advanced audio technologies. Many models feature Dolby Digital and DTS decoding, which ensure that users experience the soundtracks of their favorite films as intended by the creators. These technologies enable the system to create an accurate three-dimensional soundstage that surrounds the listener, making it feel as if they are part of the action. Additionally, certain models come equipped with Harman's proprietary technologies, such as Harman IPS (Intelligent Power Supply) and Advanced Bass Management, which further enhance audio clarity and performance.

User convenience is also a priority for Harman Kardon. Many 5.1 systems support wireless connectivity options, such as Bluetooth and Wi-Fi, allowing users to stream audio from their smartphones, tablets, or computers with ease. This feature expands the system's versatility, making it suitable for both movie watching and music listening.

Design plays an equally important role in the Harman Kardon 5.1 system. The sleek and modern aesthetics of the speakers make them an attractive addition to any home decor. With high-quality materials and finishes, including classy black and white options, these speakers look as good as they sound.

Additionally, setup and integration are designed to be straightforward. Many models include simple connection options and detailed instructions, facilitating quick installation. Some systems even incorporate auto-calibration features, which intelligently adjust speaker levels based on room acoustics, ensuring optimal sound performance without requiring extensive manual tweaking.

In conclusion, the Harman Kardon 5.1 surround sound system represents a fusion of premium audio quality, advanced technologies, and elegant design. Whether used for movie marathons or listening to music, this system caters to audiophiles and casual users alike, making it a popular choice for those seeking a top-tier home theater experience. Its blend of sophistication, performance, and ease of use makes the Harman Kardon 5.1 system a remarkable investment for anyone looking to elevate their audio enjoyment.