Three-Channel Operation | Harman-Kardon 5.1 manual

TO PROCESSOR

NORMAL		MANUAL
MODE		TURN ON
BRIDGED	CH 2 INPUT	REMOTE
CH 1 INPUT	CH 2 INPUT	TURN ON
(BRIDGED INPUT) MODE	(NOT USED IN	TURN ON
BRIDGED MODE)

			NORMAL
OFF			MODE
OFF
ON	DC	DC
ON	IN	OUT	BRIDGED
	REMOTE		BRIDGED	CH 4 INPUT
	REMOTE		CH 3 INPUT	CH 4 INPUT
			(BRIDGED INPUT) MODE	(NOT USED IN
			BRIDGED MODE)

+	+	–	+	+	+	–	+
+	BRIDGED		+	+	BRIDGED		+
–	BRIDGED		–	–	BRIDGED		–
	BRIDGED				BRIDGED
	CH 1 OUTPUT	CH 2 OUTPUT			CH 3 OUTPUT	CH 4 OUTPUT

			Speakers
–	+	– +	– +

Note: Switch on left (ch. 1 & ch. 2) is in the “Up” or “Normal” position.

Switch on the right (ch. 3 & ch. 4) is in the “Down” or “Bridged” position.

Figure 2B Three-Channel Operation

To bridge the two channels, put the switch between the two input connectors in the “Bridged” position with the toggle switch pointing down.

In this conﬁguration, connections to the speakers receiving the normal power feed from the unbridged channels should be made to the connectors for Channels One and Two in the normal fashion. That is, connect the wire running to each speaker to the appropriate output channel as marked. The “+” or “positive” connection goes to the top binding post with the red barrel. The “-” or “negative” connection goes to the bottom binding post with the black barrel.

The connection for the higher power, (bridged) channel should be following the connection diagram between the speaker connection binding posts for Channel Three and Four. Connect the “+” or positive connection going to the binding post marked “+” for Channel Three to the “+” or “red” terminal on the speaker. The connection going to the negative terminal on the speaker should be connected to the binding post marked “+” for Channel Four. (Figure 2B)

To complete the bridging of the circuits, use one of the jumpers packed with the

5.1to make a connection between the Negative (“-”) speaker connection terminals for Channel 3 and Channel 4 as shown in Figure 2B.

WARNING: The jumper connection should not be made when the ampliﬁer is turned on. This connection must be made before operating the ampliﬁer in a bridged mode.

Two-Channel Operation:

In this mode two high-powered channels are provided for subwoofer use, or for high-powered conventional stereo applications. Using high quality interconnect cables, connect one output from your preamp or processor to the input connector marked “Channel One”, and the other to the input connector marked “Channel Three”. The input connectors for channels Two and Four are not used in this con- ﬁguration. (Figure 2C)

5.1 specifications

Harman Kardon has long been recognized as a leader in premium audio systems, and their 5.1 surround sound systems exemplify this prowess. Designed to deliver an immersive home theater experience, the Harman Kardon 5.1 system combines advanced acoustic engineering with cutting-edge technology, ensuring outstanding performance across various genres and media.

One of the standout features of the Harman Kardon 5.1 system is its remarkable sound quality. The system typically comprises five satellite speakers and a powerful subwoofer, all engineered to provide rich, detailed audio. The satellite speakers are designed to handle a wide frequency range, delivering crisp highs, vibrant mids, and deep lows, while the subwoofer enhances the overall experience with thundering bass. This dynamic range enables users to enjoy everything from subtle dialogue in movies to the explosive action scenes that demand a robust audio response.

A key element of the Harman Kardon 5.1 system is its use of advanced audio technologies. Many models feature Dolby Digital and DTS decoding, which ensure that users experience the soundtracks of their favorite films as intended by the creators. These technologies enable the system to create an accurate three-dimensional soundstage that surrounds the listener, making it feel as if they are part of the action. Additionally, certain models come equipped with Harman's proprietary technologies, such as Harman IPS (Intelligent Power Supply) and Advanced Bass Management, which further enhance audio clarity and performance.

User convenience is also a priority for Harman Kardon. Many 5.1 systems support wireless connectivity options, such as Bluetooth and Wi-Fi, allowing users to stream audio from their smartphones, tablets, or computers with ease. This feature expands the system's versatility, making it suitable for both movie watching and music listening.

Design plays an equally important role in the Harman Kardon 5.1 system. The sleek and modern aesthetics of the speakers make them an attractive addition to any home decor. With high-quality materials and finishes, including classy black and white options, these speakers look as good as they sound.

Additionally, setup and integration are designed to be straightforward. Many models include simple connection options and detailed instructions, facilitating quick installation. Some systems even incorporate auto-calibration features, which intelligently adjust speaker levels based on room acoustics, ensuring optimal sound performance without requiring extensive manual tweaking.

In conclusion, the Harman Kardon 5.1 surround sound system represents a fusion of premium audio quality, advanced technologies, and elegant design. Whether used for movie marathons or listening to music, this system caters to audiophiles and casual users alike, making it a popular choice for those seeking a top-tier home theater experience. Its blend of sophistication, performance, and ease of use makes the Harman Kardon 5.1 system a remarkable investment for anyone looking to elevate their audio enjoyment.