5A.TROUBLESHOOTING, Wiring Schematic, Faceplate

SECTION 5

SERVICE TECH. INFORMATION

5A.TROUBLESHOOTING

Keep this manual with your water softener. If repairs are needed, the service technician must have the in-

formation on the following 8 pages. For telephone assistance, call toll free, 1-800-426-9345.

WIRING SCHEMATIC	BACK OF TIMER
	(PWA)

Transformer

Turbine	E_	brn	_7	NC	Position
Sensor		brn	_7	NC	Position
			grn	NO	Switch
			grn

FACEPLATE

High Flow

Sears Water Line	Deluxe Demand Water Softener
for Customer Assistance
1- 800- 426- 9345	with Dual Segment Electronic Display
	with Dual Segment Electronic Display

ALWAYS MAKE THESE INITIAL CHECKS FIRST

1.Does the time display show the correct time of day?

--If display is blank, check power source to the soft-ener.

--If time is flashing, power was off for over 24

hours. The softener resumes normal operation

but regenerations occur at the wrong time.

--If an error code (Example: Err3) shows in the

faceplate display; go to AUTOMATIC ELEC-

TRONIC DIAGNOSTICS.

. Plumbing bypass valve(s) must be in full service position.

. The inlet and outlet pipes must connect to the softener inlet and outlet respectively.

. Is the transformer plugged into a "live",

grounded wall outlet, and the power cable

fastened securely?

. The valve drain hose must be free of kinks and

sharp bends, and not elevated over 8 ft. above the floor.

REMOVE THE TOP COVER AND SALT TANK

COVER

6.Is there salt in the storage tank?

7.Is the brine tubing connected? (See water flow diagrams).

8.Is the brine valve float set right? (See page 23).

. Press the SELECT button 2 times to display the

hardness setting. Be sure it is the correct setting

for the household's water supply. (Make a

hardness test of the raw water and compare with

the hardness setting. Also test a soft water

sample to verify if a problem exists.) Press the

SELECT button twice more to return to present time in the display.

If you do not find the problem after making initial

checks, do the MANUAL INITIATED ELECTRONIC

DIAGNOSTICS, and the MANUAL ADVANCE

REGENERATION CHECK.