Kenmore 625.3483400, 625.3483500 owner manual 4A. HOW to ªFINE-TUNEº Your Softener

Page 18

SECTION 4

OTHER THINGS TO KNOW

4A. HOW TO ªFINE-TUNEº YOUR SOFTENER

It is not hard to fine:tune your softener, but it does take a few minutes of your time to do it right. You may save up to 500 pounds or more of salt each year with proper tuning. Read the following carefully.

To have soft water all the time, the softener must regenerate, or recharge a certain number of times in each 7 day period. How many times to regenerate (set the timer) depends on 3 things.

1. The number of people in your home ; tells you how much water is used.

2. The grains per gallon (GPG) hardness of your water supply ; listed on your water analysis report (see page 2 in your Installation Manual, or page 2 of this manual).

TO SET THE TIMER FOR DAYS OF REGEN- ERATION AND FILL MINUTES, DO THE FOL- LOWING.

NOTE:

Remember, the timer is factory set for Monday, Wednesday and Saturday regenerations starting at 2:00 AM. Fill time is factory set for 16 minutes.

1. SET DAYS AND TIME OF REGENERA-

TION, OR RECHARGE

a. Press the RECHARGE TIME button ￿ once to display the factory set regeneration days and starting time (flashing). To change the regen: eration start time, do step b following. Other: wise go to step c.

NOTE:

If your water supply contains iron, compensate for it by adding to the water hardness number. For example, assume your water is 15 gpg hard and contains 2 ppm iron. Add 5 to the hardness number for each 1 ppm of iron. In this example, you would use 25 for your hardness number.

FIG. 15

AM

..

MO WE SA

1

2

3

PRESENT TIME AND DAY

RECHARGE TIME

RECHARGE DAY

 

15 gpg hardness

2 ppm iron x 5 = 10

+10

(times)

25 HARDNESS NUMBER

3. How much salt is used each regeneration ; determined by the length of the fill cycle (see pages 19 and 20).

REGENERATION TABLE: The table (page 20) makes it easy fo you to pick the best regeneration and fill time setting to use.

Step 1 ; Go down the side of the table to the number of persons in your family, or the number of people in the house using water.

Step 2 ; Across the top of the table, find the column listing the grains per gallon hardness of your water.

Step 3 ; Read across and down the table to find . the point where steps 1 and 2 meet. At this meeting point, suggested days to regenerate, and fill cycle minutes needed are shown.

NOTE:

Read •Automatic Bypass" page 13, when choosing a regeneration starting time other than 2:00 AM. b. Press the SET/CLEAR button ￿ until the de: sired regeneration starting time shows in the

display.

NOTE:

Press SET/CLEAR and quickly release to move the display ahead 1 hour at a time. Or, hold the SET/CLEAR button to move the display ahead 2 hours each second.

Enter Results Here For Future Reference.

 

Days To Regenerate

Fill Cycle

 

 

SU MO TU WE TH FR SA

Minutes

 

 

 

 

 

 

± circle suggested days ±

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Owners Manual Save this ManualWarranty Full ONE Year Warranty on Water SoftenerFull TEN Year Warranty Against Leaks Repair Parts Table of ContentsService Tech Information Softener Start UPWater Softener START-UP Safety Guides Section1B. Check List of ALL STEP-BY-STEP Guides to Install Water Softener START-UPWater Softener START-UP 1C.PROGRAM the Timer SET the TimerSee page 9 for Other Timer Controls and Features Water Softener START-UP 1D. Sanitizing the Water Softener Water Softener START-UP 1E. Fill the Storage Tank with Salt HOW Your Water Softener Works Face Plate Timer Features Error CodeHOW Your Water Softener Works 2A. Face Plate Timer Features Service RegenerationWater Flow Through the Softener in Brining and Brine Rinse Automatic Bypass Please see page 8 for Salt Filling Directions Salt Bridge Salt BridgeNozzle and Venturi Care of Your Softener 3B. Keeping the Water Softener CleanCovers Iron from the Resin BEDCare of Your Softener 3C. Keep the Softener from Freezing Drain Water from the SoftenerProblem Cause Correction No Soft Water4A. HOW to ªFINE-TUNEº Your Softener SET Days and Time of Regenera TION, or RechargeSET the Fill Cycle Minutes HOW to ªFINE-TUNEº Your Softener Other Things to Know 4B.DIMENSIONS/SPECIFICATIONS Bypass ValvesServicers TECH. Information 5A.ELECTRICAL Connections Face Plate TimerServicers TECH. Information 5B.REGENERATION Cycle Times See regeneration table on page 20, and specifications,Servicers TECH. Information 5C.TROUBLESHOOTING Automatic Electronic DiagnosticsManual Advance Diagnostic Freeboard Measurement Section Assembly Servicers TECH. Information 5D.ROTARY Valve ServiceDisassembly Servicing the ValveService Cycle Fill CycleBrining and Brine Rinse Cycles Backwash CycleFast Rinse Cycle Servicers TECH. Information Sears Water Softeners Model NOS .3483400 Sears Water Softeners Section Parts List Repair Parts Bypass Installation Valve Model noOwners Manual

625.3483400, 625.3483500 specifications

The Kenmore 625.3483400 and 625.3483500 are notable additions to the line of home appliances designed for efficiency, performance, and user convenience. These air conditioners and air purifiers are particularly appreciated for their ability to improve air quality and maintain comfortable indoor temperatures during extreme weather conditions.

Both models serve as versatile solutions for homeowners seeking to combat heat and humidity. The cooling capacity of the 625.3483400 model is ideal for medium-sized rooms, while its counterpart, the 625.3483500, offers a higher capacity suited for larger spaces. This allows consumers to choose a unit that best fits their specific needs, ensuring optimal cooling performance.

One of the standout features of these models is the Smart HVAC technology integrated within. This allows users to control their air conditioning and purification settings remotely through a smartphone application, providing convenience and flexibility. Users can easily adjust the temperature, set timers, or monitor energy usage from anywhere, a feature that promotes energy efficiency and cost savings.

Another significant characteristic is the advanced filtration system. Both models are equipped with a HEPA filter, which effectively captures allergens, dust, pet dander, and other airborne particles, helping to improve indoor air quality. This is particularly beneficial for allergy sufferers and families with pets. Additionally, the filters are washable and reusable, reducing waste and making maintenance straightforward.

The eco-friendly design of the Kenmore 625.3483400 and 625.3483500 further enhances their appeal. These models utilize energy-efficient technologies that not only reduce electricity consumption but also lessen environmental impact. The low noise operation feature ensures a quiet ambiance, making them perfect for bedrooms, living rooms, or offices where noise can be a concern.

User-friendly controls, intuitive digital displays, and multiple fan speeds allow for customizable comfort, making these units easy to operate for users of all ages. With a sleek design and modern aesthetics, the Kenmore 625.3483400 and 625.3483500 complement any interior décor while delivering reliable performance.

Overall, the Kenmore 625.3483400 and 625.3483500 stand out due to their combination of powerful cooling capacities, advanced filtration systems, eco-friendly operation, and user-centric features. These models are an excellent choice for anyone looking to enhance their home’s comfort and air quality.
Top Page Image Contents