SECTION3STEP BY STEP GUIDES TO INSTALL
B. INSTALL 3-VALVE BYPASS
_ INSTALLING 3 VALVE BYPASS AND PIPES
(FIG. 9)
OCut the house main water pipe where you will connect the softener. Loosely put together pipe, fittings, and the 3 valves. Place valve(s) within easy reach.
3 - VALVE BYPASS
(threadedplumbing shown)
IMPORTANT:
When looking at the front of the softener, the inlet is on the right side. If water in your house main wa- ter pipe runs from left to right, be sure to use a
OWhen all pipe, fittings and valves make a good
fit together, tighten all threaded joints (use pipe
dope on outside threads), or solder all sweat joints.
l
to softener inlet
High Performance Valve