Kenmore 625.348321 owner manual Problem Cause Correction, No Soft Water

Page 17

SECTION 3

CARE OF YOUR SOFTENER

3D. HELPFUL HINTS CHECKLIST

... TO HELP YOU SAVE MONEY

NOTE:

1.Read “ERROR CODE”, page 9.

2.If your water softener fails to work, make the following easy checks. Often, you will find what’s wrong yourself and you won’t have to call and wait for service. If, after making the checks, your soften-

er still does not work right, call your Sears Service Department, or call toll free, number 1-800-426-9345 for telephone assistance.

You can find the model number of your water softener on the rating decal, on the brine tank rim. See page 32.

PROBLEM

CAUSE

CORRECTION

NO SOFT WATER

No salt in the storage tank

Refill with salt (see page 8). Use the RECHARGE

 

 

NOW button to start a regeneration (see page 9).

 

Transformer unplugged at the wall

Check for loss of power and correct. Reset the

 

outlet, or power cable disconnected

times, then use the RECHARGE NOW button to

 

 

start a regeneration (see page 9).

 

Fuse blown, circuit breaker popped, or

Replace fuse, reset circuit breaker, or switch circuit

 

circuit switched off— SEE PAGE 10,

on. Reset times and use the RECHARGE NOW

 

“TIMER POWER-OUTAGE MEMORY”.

button to start a regeneration.

 

Timer in the vacation (VAC) position

See VACATION feature to return the softener to

 

 

service (page 9).

 

No regenerations set on the timer

See pages 18-20 to select and program a

 

 

schedule. Use the RECHARGE NOW button to

 

 

start an immediate regeneration.

 

Manual bypass valve(s) in bypass

See FIG. 16, page 21. Move stem in single bypass

 

position

valve to SERVICE.

 

Salt in storage tank bridged

Refer to page 14 to break.

 

Dirty, plugged or damaged nozzle &

Take apart and clean (see page 15) or replace

 

venturi

damaged parts.

 

Valve drain hose plugged

Hose must not have kinks, sharp bends, or any

 

 

water flow blockage (see page 16 in your

 

 

installation manual).

 

Low or high system water pressure (Low

If pressure is low, increase well pump output to a

 

pressure may disrupt brine draw during

minimum of 20 psi. Add a pressure reducing valve,

 

recharge. High pressures may cause

in the supply pipe to the softener, if day time

 

inner valve parts failure.)

pressure is over 100 psi (see installation manual).

 

 

 

WATER HARD

Regenerations too few

Refer to pages 18-20 to find correct setting.

SOMETIMES

 

 

More water being used

See pages 18-20 for correct regeneration setting.

 

Hot water used when softener is

Avoid using hot water as the water heater refills

 

regenerating

with hard water (see “Automatic Bypass”on page

 

 

13).

 

Possible increase in water hardness

Ask your Sears retail or catalog store for a new

 

 

water analysis.

 

Leaking faucet or toilet valve

A small leak will waste hundreds of gallons ofwater

 

 

in a few days. Fix all plumbing leaks and always

 

 

fully close faucets.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Save this Manual OWNER’S ManualFull TEN Year Warranty Against Leaks WarrantyFull ONE Year Warranty on Water Softener Service Tech Information Table of ContentsRepair Parts Softener Start UPSection Water Softener START-UP Safety GuidesWater Softener START-UP 1B. Check List of ALL STEP-BY-STEP Guides to InstallSET the Timer Water Softener START-UP 1C.PROGRAM the TimerSee page 9 for Other Timer Controls and Features SET Time of DAYWater Softener START-UP 1D. Sanitizing the Water Softener Water Softening Salt with Iron RE Water Softener START-UP 1E. Fill the Storage Tank with SaltHOW Your Water Softener Works Face Plate Timer Features Flashing display is to remind you to reset the timer HOW Your Water Softener Works 2A. Face Plate Timer FeaturesRegeneration ServiceWater Flow Through the Softener in Brining and Brine Rinse Automatic Bypass Salt Bridge Please see page 8 for Salt Filling Directions Salt BridgeCoversnote Care of Your Softener 3B. Keeping the Water Softener CleanNozzle and Venturi Iron from the Resin BEDSoftener Keep the Softener from FreezingNo Soft Water Problem Cause CorrectionSET Days and Time of REGENERA- TION, or Recharge Other Things to Know 4A. HOW to FINE-TUNE Your SoftenerSET the Fill Cycle Minutes See Instructions for Using the TABLE, Other Things to Know HOW to FINE-TUNE Your SoftenerInches Other Things to Know 4B. DIMENSIONS/SPECIFICATIONSFaceplate Timer Service TECH. Information 5A. Electrical ConnectionsSee Regeneration Table on page 20, and SPECIFICATIONS, Service TECH. Information 5B. Regeneration Cycle TimesManual Advance Diagnostic Service TECH. Information 5C.TROUBLESHOOTINGAutomatic Electronic Diagnostics Brine Valve Float Setting Freeboard Measurement Section Disassembly Service TECH. Information 5D.ROTARY Valve ServiceAssembly Servicing the ValveFill Cycle Service CycleBackwash Cycle Brining and Brine Rinse CyclesFast Rinse Cycle Service TECH. Information Sears Water Softener KEY Part Description Number Repair Parts Brine Valve AssemblyValve Assembly Bypass Installation Valve Model no Parts ListSolid State

625.348321 specifications

The Kenmore 625.348321 is a highly regarded model in the realm of water softeners, designed to alleviate the challenges posed by hard water in households. This unit effectively addresses the mineral buildup caused by calcium and magnesium ions, improving water quality and enhancing the longevity of plumbing fixtures, appliances, and laundry.

One of the standout features of the Kenmore 625.348321 is its impressive grain capacity. With a capacity of 31,000 grains, it is well-suited for medium to large households. This ensures that families experience consistent and reliable soft water, preventing the telltale signs of hard water, such as scale buildup and dry skin.

The unit employs a powerful ion exchange technology, a widely recognized method for softening water. The process involves exchanging the hard water minerals for sodium ions, effectively capturing the unwanted hardness and leaving users with soft, palatable water. This not only enhances the efficiency of soaps and detergents but also promotes the health of plumbing systems and appliances by preventing mineral deposits.

An additional feature is its demand-initiated regeneration system. This technology allows the unit to monitor water usage and regenerate only when necessary, which results in reduced salt and water consumption. This energy-efficient approach not only helps lower utility bills but also contributes to a more sustainable household environment.

The Kenmore 625.348321 also boasts user-friendly programming options, enabling homeowners to easily set and adjust preferences for optimal performance. The intuitive interface allows for quick access to diagnostics and system performance, ensuring that users are well-informed about the status of their water softening system.

Moreover, this model is equipped with a large brine tank that can hold a significant amount of salt, minimizing the frequency of refills and simplifying maintenance. With its compact design, the water softener fits seamlessly into various spaces, making it a convenient choice for homes with limited installation areas.

In summary, the Kenmore 625.348321 stands out as an effective water softener, combining advanced technology with user-friendly features. It provides households with the benefits of soft water, ensuring cleaner clothes, softer skin, and extended appliance life—all key advantages for any modern home.
Top Page Image Contents