Cisco Systems 3527 PRI, 3522 BRI manual Ekts, Call Appearances

Chapter 2 Setting Up Your Cisco Unified Videoconferencing 3500 Gateway

Preparing for Installation of the Cisco Unified Videoconferencing 3522 BRI Gateway

•For an H.323 environment, the IP address of the H.323 gatekeeper with which you want the Cisco Unified Videoconferencing 3527 PRI Gateway unit to register

•Available IP network ports on the switch for the Cisco Unified Videoconferencing 3527 PRI Gateway unit

•A grounded AC power outlet

•A 10BaseT or 100BaseT LAN cable

•Ambient room temperature range of 32o to 104oF (0o to 40oC)

•Non-condensing relative humidity range of 5% to 90%

Preparing for Installation of the Cisco Unified

Videoconferencing 3522 BRI Gateway

The Cisco Unified Videoconferencing 3522 BRI Gateway prepares the signaling for outbound videoconference calls that are transmitted over Integrated Services Digital Network (ISDN) networks. For videoconference information to arrive at its destination, you must work with the BRI service provider to ensure that the gateway and the ISDN service are compatible. You must gather information about the service provider equipment and provide the service provider with information about the gateway.

Before you order BRI service or connect the Cisco Unified Videoconferencing 3522 BRI Gateway to your existing BRI service, we suggest that you gather the following information.

Step 1 Identify the ISDN provider you want to use as your Local Exchange Carrier (LEC) for local calls.

Note The LEC is the local telephone company that provides ISDN services for your local calling area and to which your equipment connects.

Step 2 Identify the ISDN provider you want to use as your Interexchange Carrier (IEC) for long-distance calls.

Note The IEC and the LEC are different companies. Often the LEC will contact the IEC and provision long-distance service for you. Verify that your LEC performs this task, and contact an IEC if the LEC does not.

Step 3 Determine how many BRI lines you want to connect to the gateway.

Step 4 Identify the ISDN equipment or signaling format your LEC uses.

Step 5 Determine whether you want to use layer 1 line hunting.

Step 6 Have your ISDN service provider turn off the following switch settings:

•Packet Mode Data on the D channel

•Terminal Display Text

•EKTS

•Call Appearances

Installation and Upgrade Guide for Cisco Unified Videoconferencing 3522 BRI Gateway and 3527 PRI Gateway Release 5.5

2-4 OL-14910-01