CLEANING METHOD
▶Inside water tank
Installation and Cleaning
1Close the water supply valve, press the cold water button at the front of the product for 3
seconds to turn off the cold water function, and completely drain the
by selecting continuous cold water extraction mode.
2Open the drain door, and remove the red drain safety cap. Using the drainage hose, completely discharge all the hot water in the tank, and
store the water. When the water is completely drained, pull out the power cord.
�
�
5 Clean the surface of the water drum with a soft cloth.
6 Rinse the water drum with
the previously stored room- |
| |
temperature water, plug the |
| |
power in, and completely | � | |
drain the rinsing water using | ||
| ||
the cold water continuous |
| |
extraction function. |
|
Cleaning Method
3Open the top cover of the product, and open the water drum cover inside the product.
� 
� 
4 Remove the ceramic filter
from the bottom part of |
| |
the water drum cover, | � | |
and clean by agitating in | ||
� | ||
� |
26
7Fix the ceramic filter underneath the water drum cover, and close the water drum cover.
�
�
�
8Close the top cover and then connect the power cord
before opening the main water supply valve. After checking water extraction from the faucet of the cold/room water and hot water, press the cold water selection switch in front of the product for
Please close the cover of the storage tank completely.
Ants or other substances might get inside.
27