Normal Play, Random Play, Search, Track Skip

PLAYBACK BASICS

Normal Play

To play a disc, first make certain that the unit is prop- erly installed. Turn the CDR 26 on by pressing the Power Switch 1 on the front panel or the Power On Button a on the remote and note that the front-panel display will light.

Insert a disc following the instructions shown on the previous page. To start the playback, press the Play button on the front panel for the appropriate deck

Ó35 or press the Select button on the remote for the desired deck d` and then press the Play Button j on the remote. The Play/Pause Indicator O will show a right-pointing triangle › and the Information Display Y will show the track number being played and the running time of the track. As each new track begins to play, the track time will reset to 00:00 and begin to count up for the new track.

NOTE: Remember that unfinalized CD-R or CD-RW discs will only play in the Record Deck %. If you attempt to play an unfinalized disc in the Play Deck 3, a DISC ERROR message will appear to remind you to play the disc in the other deck.

To go directly to a specific track on a disc, enter the track number using the Numeric Keys p. When selecting a two-digit track number, the second digit must be entered within three seconds after the first Numeric Key is pressed.

To momentarily stop the disc at any time, press the Pause Button Ô 34 w. When a disc is paused, the Play/Pause Indicator O will add two vertical lines to indicate a paused disc. Press either the Play Button Ó 35 j or the Pause Button Ô 34

wto resume playback at the point where the disc was paused.

In normal operation, the CDR 26 will automatically stop when all tracks on the selected disc have played through. To stop playback at any time, press the Stop Button ( 36 v for the deck in use.

At the end of a listening session, remove the discs from the decks by following the instructions shown on the previous page. Do not leave the disc drawers open when the unit is not in use to prevent dust and dirt from entering the unit and to prevent damage to the disc-drawer tray.

To place the unit in the Standby mode at the end of a listening session, press the Power Off Button 30 . The word OFF will appear briefly in the Information Display Y, any open disc trays will automatically close, and the Status Mode Indicator 2 will turn amber.

Random Play

To play all of the tracks on a disc in random order, press the Select Button d` for the desired deck, and then press the Random Play Button k. The Random Indicator G will light and each track will be played in random order until all tracks on the disc have been played.

Search

You may quickly scan through the contents of a disc while listening to the playback at high speed in forward or reverse. To move forward through a disc, press the Forward Search Button x on the remote or press and hold the Next Button Ò˘ on the front panel that is appropriate for the deck in use. To move back- ward through a disc, press the Reverse Search Button i on the remote, or press and hold the Previous Button Ú¸ on the front panel that is appropriate for the deck in use. When using the remote, always remember to make certain that you have selected the deck you wish to control by press- ing the appropriate selector button d` before entering the desired remote command.

Track Skip

To move from one track on a disc directly to another, enter the number for the desired track with the Numeric Keys p. The disc will pause briefly to locate the track, and then immediately play it. When entering a two-digit track number, the second digit must be entered within three seconds of the first digit.

To move to the next track on a disc by cycling through the individual tracks, press the Next Button z on the remote, or the appropriate front-panel Next Button Ò˘ for the deck in use. Additional presses of the button will move forward through the tracks on the disc.

When a disc is playing, press the Previous Button Ú¸f to return to the beginning of the track being played. Additional presses of the Previous button will move backwards through the tracks on the disc.

When a disc is stopped, you may press the Next or Previous button to locate a specific track that you wish to play. When the desired track number appears at the left side of the appropriate Information Display Y, press the Play Button Ó 35 j to hear that track.

16 PLAYBACK BASICS

CDR 26 specifications

The Harman-Kardon CDR 26 is a sophisticated CD recorder that combines high-quality audio playback with recording capabilities, catering to audiophiles and casual listeners alike. Renowned for its sleek design and user-friendly interface, the CDR 26 has become a popular choice for those looking to preserve their favorite music from CDs or other sources onto writable CDs.

One of the standout features of the CDR 26 is its dual disc operation, allowing users to seamlessly switch between a CD playback source and a recording medium. This feature enhances the recording process, making it efficient and straightforward. The device supports various disc formats, including CD-R and CD-RW, giving users the flexibility to burn their music onto a variety of media.

The CDR 26 employs advanced recording technologies that ensure optimal audio fidelity. With a high-quality 24-bit/96kHz digital-to-analog converter, it provides rich sound reproduction that faithfully captures the nuances of the original recordings. Additionally, the device boasts a variety of recording modes, including on-the-fly recording, which allows users to create compilations without the need for a computer.

Another remarkable characteristic of the CDR 26 is its integrated digital signal processing (DSP) features. The built-in DSP allows for various editing functions, such as track splitting and adjusting levels, making it easier for users to create professional-quality recordings. The intuitive interface includes an LCD screen that displays pertinent information, including track numbers, remaining recording time, and more, making navigation clear and efficient.

Furthermore, the Harman-Kardon CDR 26 includes extensive connectivity options. With optical and coaxial digital inputs, as well as traditional analog inputs, users can connect it to a variety of audio sources, including turntables and tape decks. This versatility makes it an ideal component in a comprehensive audio system.

In summary, the Harman-Kardon CDR 26 is a feature-rich CD recorder that excels in both audio quality and usability. Its dual disc operation, advanced recording technologies, integrated DSP capabilities, and versatile connectivity options make it a valuable tool for anyone who wishes to curate and preserve their musical collections while enjoying high-fidelity sound. Whether for personal use or as part of a larger audio setup, the CDR 26 represents a reliable choice for all your CD recording needs.