Harman-Kardon CDR 26 owner manual Continuous Play, Time Display, Headphone Listening

Page 17

PLAYBACK BASICS

Continuous Play

Since the CDR 26 has more than one CD deck, you may play a disc in either drawer. In normal operation, the selected disc will be played once, then play will stop automatically.

However, you may also use the Continuous Play mode to use the CDR 26 for extended play by playing through all the tracks on the disc in one tray, automati- cally switching to the disc in the second tray, and then continuously playing each disc in sequence until the Stop Button ( 36 v is pressed.

To initiate continuous play, first press the Continuous Play Button ¯ 31 , and the Information Display

ıwill show the current state of the mode. If the readout displays CONTINUE OFF press the Continuous Play Button ¯ 31 again so that the message changes to CONTINUE ON. Next,

press the front-panel Play Button Ó 35 for the deck that you wish to play first, or press the CDP Select d or CDR Select ` on the remote and then press the Play Button j.

Continuous playback may be stopped at any time by pressing the Stop Button ( 36 v. To cancel continuous play after the current disc is finished playing, press the Continuous Play Button ¯ 31 twice so that CONTINUE OFF appears in the Information Display ı.

Time Display

The CDR 26’s time display is capable of showing a wide range of information about the contents of a CD.

Once the disc’s Table of Contents, or TOC, data has been read, the Information Display Y for any deck that has a CD inside will show the number of tracks on the disc in the two left digits of the display, and the total running time of the disc. When the disc is playing, the tracks will count up as each new track is reached, and time display will show the elapsed time for the track being played.

To view the time remaining in the track being played, press the Time Display Control Button Ù˜

b29 for the deck in use so that the Remaining Time Indicators ST light. The Information Display Y will count down the time remaining in the track, and at the start of the next track the counter will start to count down the running time of that track.

To view the total time remaining on the disc, press the Time Display Control Button Ù˜b 29 for the deck in use so that the Total Time Indicators SV light. The Information Display Y will show the total time remaining for all tracks on the disc and count down until the disc has finished playing. When the disc has played all the way through, the total num- ber of tracks and the total running time of the disc will be displayed.

Headphone Listening

You may listen to the output of the CDR 26 through headphones at any time by simply plugging the head- phones into the front-panel Headphone Jack 4. The volume of the headphone output may be adjusted with the Headphone Level Control 5. Changes to the headphone level will not alter the output settings to the analog outputs. Those levels are fixed, and the vol- ume should be adjusted using your receiver, preamp or processor.

PLAYBACK BASICS 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents DUAL-TRAY CD-R/CD-RW RECORDER/PLAYER CDRCDR 26 DUAL-TRAY CD-R/CD-RW RECORDER/PLAYER Table of ContentsThank you for choosing Harman Kardon IntroductionImportant Information About CD Recording Unpacking Safety InformationImportant Safety Information FRONT-PANEL Controls Pressing the Play Button PlayFront-Panel Input Indicator Dubbing Indicator Analog Indicator Track Dubbing IndicatorSync Indicator Sample-Rate Conversion Indicator FRONT-PANEL Information DisplayTrack Time Indicators These indicators light REAR-PANEL Connections § Optical-Digital Output AC Power CordPower On Remote Control FunctionsStop Press this button to stop playback or recording Play Deck CDP Open Press this button to open the Play DeckRecord Button Press this button to begin a manual recording Connections to Your Audio System Installation and ConnectionsPlacement of the CDR IR Remote Connections Power ConnectionsBatteries Disc Types CD Recording BasicsCD-R Terminology and Display Messages Your CDRPlayback Basics Using the RemoteLoading and Unloading Discs To turn the unit completely offNormal Play To resume playback at the point where the disc was pausedRandom Play SearchHeadphone Listening Continuous PlayTime Display Repeat Play Program PlayProgramming Playlists Disc Dubbing CD RecordingRecordings on the CDR 26 may be made in a num- ber of ways Recordings may be made from an external analog sourceRecording From an External Source CD Sync RecordingUnfinalizing a CD-RW Disc Finalizing CD-R and CD-RW DiscsErasing an Entire CD-RW Disc Erasing a Single TrackCD Recording Troubleshooting Guide and Error Messages Signal Format Playback Sampling Frequency 44.1kHz Conversion CDR 26 Technical Specifications
Related manuals
Manual 4 pages 49.73 Kb Manual 27 pages 14.84 Kb

CDR 26 specifications

The Harman-Kardon CDR 26 is a sophisticated CD recorder that combines high-quality audio playback with recording capabilities, catering to audiophiles and casual listeners alike. Renowned for its sleek design and user-friendly interface, the CDR 26 has become a popular choice for those looking to preserve their favorite music from CDs or other sources onto writable CDs.

One of the standout features of the CDR 26 is its dual disc operation, allowing users to seamlessly switch between a CD playback source and a recording medium. This feature enhances the recording process, making it efficient and straightforward. The device supports various disc formats, including CD-R and CD-RW, giving users the flexibility to burn their music onto a variety of media.

The CDR 26 employs advanced recording technologies that ensure optimal audio fidelity. With a high-quality 24-bit/96kHz digital-to-analog converter, it provides rich sound reproduction that faithfully captures the nuances of the original recordings. Additionally, the device boasts a variety of recording modes, including on-the-fly recording, which allows users to create compilations without the need for a computer.

Another remarkable characteristic of the CDR 26 is its integrated digital signal processing (DSP) features. The built-in DSP allows for various editing functions, such as track splitting and adjusting levels, making it easier for users to create professional-quality recordings. The intuitive interface includes an LCD screen that displays pertinent information, including track numbers, remaining recording time, and more, making navigation clear and efficient.

Furthermore, the Harman-Kardon CDR 26 includes extensive connectivity options. With optical and coaxial digital inputs, as well as traditional analog inputs, users can connect it to a variety of audio sources, including turntables and tape decks. This versatility makes it an ideal component in a comprehensive audio system.

In summary, the Harman-Kardon CDR 26 is a feature-rich CD recorder that excels in both audio quality and usability. Its dual disc operation, advanced recording technologies, integrated DSP capabilities, and versatile connectivity options make it a valuable tool for anyone who wishes to curate and preserve their musical collections while enjoying high-fidelity sound. Whether for personal use or as part of a larger audio setup, the CDR 26 represents a reliable choice for all your CD recording needs.
Top Page Image Contents