Harman-Kardon CDR 26 owner manual Important Safety Information, Unpacking

Page 4

SAFETY INFORMATION

Important Safety Information

Verify Line Voltage Before Use

Your CDR 26 has been designed for use with 100- to 240-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit.

If you have any questions about the voltage require- ments for your specific model, or about the line volt- age in your area, contact your selling dealer before plugging the unit into a wall outlet.

Do Not Use Extension Cords

We do not recommend that extension cords be used with this product. As with all electrical devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately by an authorized service depot with cords meeting factory specifications.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC out- let, always pull the plug; never pull the cord. If you do not intend to use the unit for any considerable length of time, disconnect the plug from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee. If water or any metal object such as a paper clip, wire or a staple accidentally falls inside the unit, disconnect it from the AC power source immedi- ately, and consult an authorized service station.

CAUTION: The CDR 26 uses a laser system. To pre- vent direct exposure to the laser beam, do not open the cabinet enclosure or defeat any of the safety mechanisms provided for your protection. DO NOT STARE INTO THE LASER BEAM. To ensure proper use of this product, please read this owner’s manual care- fully and retain it for future use. Should the unit require maintenance or repair, please contact your local Harman Kardon service center. Refer servicing to qualified personnel only.

Installation Location

■To ensure proper operation and to avoid the poten- tial for safety hazards, place the unit on a firm and level surface. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product.

■Make certain that proper space is provided both above and below the unit for ventilation. If this product will be installed in a cabinet or other enclosed area, make certain that there is sufficient air movement within the cabinet.

■Do not place the unit directly on a carpeted surface.

■Avoid installation in extremely hot or cold locations, or an area that is exposed to direct sunlight or heating equipment.

■Avoid moist or humid locations.

■Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them.

Cleaning

When the unit gets dirty, wipe it with a clean, soft dry cloth. If necessary, wipe it with a soft cloth dampened with mild soapy water, then a fresh cloth with clean water. Wipe dry immediately with a dry cloth. NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. Avoid spraying insecticide near the unit.

Moving the Unit

Before moving the unit, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the AC outlet.

IMPORTANT NOTE: To avoid damage to the CDR 26 which may not be covered by the warranty, be certain that all discs are removed from the unit before it is moved. Once the CDR 26 is installed, discs may be left in the unit when it is turned off, but the unit should NEVER be moved with discs left in either deck.

Unpacking

The carton and shipping materials used to protect your new receiver during shipment were specially designed to cushion it from shock and vibration. We suggest that you save the carton and packing materials for use in shipping if you move, or should the unit ever need repair.

To minimize the size of the carton in storage, you may wish to flatten it. This is done by carefully slitting the tape seams on the bottom and collapsing the carton down to a more two-dimensional appearance. Other cardboard inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the carton and other sections of the shipping protection are recyclable. Please respect the environment and discard those materials at a local recycling center.

4 SAFETY INFORMATION

Page 3 Page 5
Image 4
Page 3 Page 5
Contents CDR DUAL-TRAY CD-R/CD-RW RECORDER/PLAYERTable of Contents CDR 26 DUAL-TRAY CD-R/CD-RW RECORDER/PLAYERImportant Information About CD Recording IntroductionThank you for choosing Harman Kardon Important Safety Information Safety InformationUnpacking FRONT-PANEL Controls Play Pressing the Play ButtonAnalog Indicator Track Dubbing Indicator Front-Panel Input Indicator Dubbing IndicatorSync Indicator Sample-Rate Conversion Indicator FRONT-PANEL Information DisplayTrack Time Indicators These indicators light § Optical-Digital Output AC Power Cord REAR-PANEL ConnectionsRemote Control Functions Power OnRecord Button Press this button to begin a manual recording Play Deck CDP Open Press this button to open the Play DeckStop Press this button to stop playback or recording Placement of the CDR Installation and ConnectionsConnections to Your Audio System Batteries Power ConnectionsIR Remote Connections CD Recording Basics Disc TypesCD-R Terminology and Display Messages Your CDRUsing the Remote Playback BasicsLoading and Unloading Discs To turn the unit completely offTo resume playback at the point where the disc was paused Normal PlayRandom Play SearchTime Display Continuous PlayHeadphone Listening Programming Playlists Program PlayRepeat Play CD Recording Disc DubbingRecordings on the CDR 26 may be made in a num- ber of ways Recordings may be made from an external analog sourceCD Sync Recording Recording From an External SourceFinalizing CD-R and CD-RW Discs Unfinalizing a CD-RW DiscErasing an Entire CD-RW Disc Erasing a Single TrackCD Recording Troubleshooting Guide and Error Messages CDR 26 Technical Specifications Signal Format Playback Sampling Frequency 44.1kHz Conversion
Related manuals
Manual 4 pages 49.73 Kb Manual 27 pages 14.84 Kb

CDR 26 specifications

The Harman-Kardon CDR 26 is a sophisticated CD recorder that combines high-quality audio playback with recording capabilities, catering to audiophiles and casual listeners alike. Renowned for its sleek design and user-friendly interface, the CDR 26 has become a popular choice for those looking to preserve their favorite music from CDs or other sources onto writable CDs.

One of the standout features of the CDR 26 is its dual disc operation, allowing users to seamlessly switch between a CD playback source and a recording medium. This feature enhances the recording process, making it efficient and straightforward. The device supports various disc formats, including CD-R and CD-RW, giving users the flexibility to burn their music onto a variety of media.

The CDR 26 employs advanced recording technologies that ensure optimal audio fidelity. With a high-quality 24-bit/96kHz digital-to-analog converter, it provides rich sound reproduction that faithfully captures the nuances of the original recordings. Additionally, the device boasts a variety of recording modes, including on-the-fly recording, which allows users to create compilations without the need for a computer.

Another remarkable characteristic of the CDR 26 is its integrated digital signal processing (DSP) features. The built-in DSP allows for various editing functions, such as track splitting and adjusting levels, making it easier for users to create professional-quality recordings. The intuitive interface includes an LCD screen that displays pertinent information, including track numbers, remaining recording time, and more, making navigation clear and efficient.

Furthermore, the Harman-Kardon CDR 26 includes extensive connectivity options. With optical and coaxial digital inputs, as well as traditional analog inputs, users can connect it to a variety of audio sources, including turntables and tape decks. This versatility makes it an ideal component in a comprehensive audio system.

In summary, the Harman-Kardon CDR 26 is a feature-rich CD recorder that excels in both audio quality and usability. Its dual disc operation, advanced recording technologies, integrated DSP capabilities, and versatile connectivity options make it a valuable tool for anyone who wishes to curate and preserve their musical collections while enjoying high-fidelity sound. Whether for personal use or as part of a larger audio setup, the CDR 26 represents a reliable choice for all your CD recording needs.
Top Page Image Contents