Harman-Kardon CDR 30 Will show the following informa- tion, in order, Pause ï v and Stop, Search

Page 17

Playback Basics

During normal playback of MP3 discs, pressing the CDP or CDR Display Button

b28 will show the following informa- tion, in order:

Elapsed time of current track ➜ Remaining Time of current track ➜ Current Track Number ➜ File name of Current Track (Up to the first six digits)

To read the total time of all tracks recorded on an MP3 disc, the disc must be stopped. Then, press the CDP or CDR Display Button

b28 (as appropriate) for three seconds, until a TTL TIMEON message appears in the Time/Message Display F. Then press the CDP or CDR Display Button b 28 again to alternate between a display of the total number of tracks and the total time of the disc. Press and hold the CDP or CDR Display Button b 28 again for three seconds until a TTL TIME OFF message appears in the Time/ Message Display F to return to standard display.

While MP3 playback is possible from both the CDP and CDR decks, only one MP3 disc may be played at a time. If you load two MP3 discs at the same time, both MP3 Indicators Pwill flash. Press the Play Button j( for the deck you wish to play first, and the MP3 Indicator Pabove that deck will continue to flash to indicate active MP3 playback.

If a disc with MP3 data is in both decks, either in the form of an MP3-only disc, Multisession discs, or one of each, an MP3 ON message will flash three times in the center of the Message Display F. Press the MP3 Button rñ to select MP3 ON or MP3 OFFas desired for the deck with the Multisession disc, and then press the Play Button j( to proceed.

Notes About MP3 Playback:

•When an MP3 disc is played, only the Analog Audio Outputs Áª are available. There is no signal at the Digital Audio Outputs ¢°¥» during MP3 playback. To ensure that the MP3 output is heard, make certain that the correct analog input is selected on your receiver, processor or preamp.

•The forward and reverse “fast play” or Search Controls fy do not operate during MP3 playback. However, the standard Play

j( , Pause ïv and Stop

îu Controls operate as they do for normal play. The Next Track wóý and Previous Track iô Controls also work normally during MP3 playback.

•The CDR 30 will play only standard MP3 discs recorded in the MPEG 1/Layer 3 format. Other compressed digital audio formats will not be

played back, and any non-MP3 tracks will be skipped.

•When an MP3 disc is dubbed in the CDR 30, the copy disc will be recorded in the standard “Red Book” CD Audio format. It is not possible to make an MP3 copy of an MP3 disc.

HDCD Playback

HDCD, which stands for High Definition Compatible Digital, is a special recording process that enables the CDR 30 to deliver the ultimate in CD audio playback. The CDR 30’s circuitry takes advantage of the special HDCD recording process when HDCD-encoded discs are used, and it is also completely compatible with non-HDCD discs, which benefit from the unit’s advanced digital-to-analog converters.

No special adjustment is needed to play HDCD encoded discs. Simply use the disc as you would any other CD. Although these discs also play on conventional CD players, when played on the CDR 30 the special HDCD decoding circuitry is automatically activated, delivering extraordinary fidelity and the highest possible overall quality.

The CDR 30 will play back and internally decode HDCD discs from either the CDP or CDR decks. However, when the HDCD decoding is done in an external receiver or processor using a digital output connection from the CDR 30, playback of HDCD or DTS®-encoded discs must be made from the Play/CDP Deck 3 only.

When an HDCD disc is playing, the appropriate HDCD Indicator Nwill light above the deck in use.

CD Text Playback

An increasing number of CD discs are recorded with CD Text information that may display the disc’s title, the name of the artists, the title of specific individual tracks, and the artist for specific individual tracks, depending on how the disc’s producers program the information.

When a disc’s Table of Contents (TOC) has been read, but the disc is stopped, press the CD Text Button l for the deck in use (either the left side, Play/CDP deck or the right side, Record/CDR deck) to view the title of the disc followed by the disc’s artist.

When a disc with CD Text information is playing, press the CD Text Button l for the deck in use (either the left side, Play/CDP deck or the right side, Record/CDR deck) to view the name of the track that is playing and the artist for that track.

Notes on CD Text Display:

•If the CD Text buttons are pressed when the disc playing does not contain CD Text informa- tion, a NO TEXTmessage will flash three times in the Time/Message Display F.

•CD Text displays will appear only in English.

•Only capital letters will be displayed, and lower case letters will be capitalized.

•Blank spaces may occasionally appear in place of invalid text characters.

Search

You may quickly scan through the contents of a disc while listening to the playback at high speed in forward or reverse. To move forward through a disc, press the Forward Search Button y on the remote or press and hold the Next Button óýon the front panel that is appropriate for the deck in use. To move backwards through a disc, press the Reverse Search Button f on the remote, or press and hold the Previous Button

ô on the front panel that is appropriate for the deck in use. When using the remote, always remember to make certain that you have selected the deck you wish to control by pressing the appropriate Selector Button dz before entering the desired remote command.

Track Skip

To move from one track on a disc directly to another, enter the number for the desired track with the Numeric Keys o. The disc will pause briefly to locate the track, and then immediately play it. When entering a two digit track number, the second digit must be entered within three seconds of the first digit.

To move to the next track on a disc by cycling through the individual tracks, press the Next Button w on the remote, or the appropriate front panel Next Button óýfor the deck in use. Additional presses of the button will move forward through the tracks on the disc.

When a disc is playing, press the Previous Button iô to return to the beginning of the track being played. Additional presses of the Previous button will move backwards through the tracks on the disc.

When a disc is stopped, you may press the Next or Previous buttons to locate a specific track that you wish to play. When the desired track number appears at the left side of the appropriate Time/Message Display F, press the Play Button j( to hear that track.

17PLAYBACK BASICS

Page 16 Page 18
Image 17
Page 16 Page 18
Contents CDR 30 CD Recorder CDR 30 Compact Disc Recorder Important Information About CD Recording Ergonomic Remote ControlIntroduction Safety Information Front Panel Controls CDR Deck Pause Button When CDR Deck Next Track When a disc isTime/Message Display This display Single/Dual Play Indicators OneFront Panel Information Display Front Panel Information Display Rear Panel Connections AC Power CordPlay CDP-Deck Analog Output Record CDR-Deck Coaxial-DigitalTime/Message Display F Remote Control FunctionsRemote Control Functions Locating the CDR Installation and ConnectionsPlay-Deck Connections Record-Deck ConnectionsBatteries Power ConnectionsIR Remote Connections To the input of the other product or systemDisc Types CD Recording BasicsRecording Options DiscPlayback Basics Using the RemoteLoading and Unloading Discs You if a CD-R or CD-RW disc is in useMP3 Playback Normal PlayWill turn amber Pause ï v and Stop Will show the following informa- tion, in orderHdcd Playback CD Text PlaybackDual-Deck Operation Dual-Play ModeTime Display Headphone ListeningProgram Play Repeat A-B To hear the entire contents of a track while itRandom Play Intro Scan PlayTrack Dub Button CD RecordingDisc Dubbing To select how tracks will be numbered on the recorded disc Pause buttons do not operate while a dub is in progressRecording From an External Source Unfinalizing a CD-RW Disc CD Sync RecordingRecord Levels Total number of tracks that now remain on the disc Erasing an Entire CD-RW DiscErasing a Single Track Troubleshooting Guide and Error Messages Signal Format Technical SpecificationsPlayback Specifications Record SpecificationsPage Harman Kardon, Incorporated 3828R-D010A

CDR 30 specifications

The Harman-Kardon CDR 30 is a notable entry in the realm of high-fidelity audio recording and playback, showcasing the company’s commitment to delivering superior sound quality and advanced technology. Launched in the late 1990s, this compact disc recorder has carved a niche among audiophiles seeking a reliable device for digital audio reproduction and CD creation.

One of the standout features of the CDR 30 is its dual functionality, allowing users to both record and playback CDs. It comes with a built-in CD-R and CD-RW drive, enabling the recording of high-quality audio on standard recordable CDs. This flexibility provides users with the convenience of generating their own music compilations or preserving precious vinyl collections in digital format. The CDR 30 supports multiple recording speeds, ensuring that users have control over the process, whether they are creating a perfect mix or archiving favorite tracks.

In terms of sound quality, the CDR 30 excels with its 24-bit digital-to-analog converter (DAC), which helps to deliver clear and precise audio reproduction. This high-resolution audio technology is critical for discerning listeners who appreciate the nuances of their favorite recordings. Additionally, the device is equipped with advanced processing capabilities, including a sampling rate of 44.1 kHz, which further enhances the overall fidelity of playback and recording.

Another significant characteristic of the Harman-Kardon CDR 30 is its user-friendly interface. The device features a clear LCD display, simplistic navigation controls, and straightforward remote functionality, ensuring that users can easily manage their recording sessions or playback selections. Advanced programming options, such as track editing capabilities and programmable memory, cater to the needs of those who wish to customize their listening experience.

Connectivity is also a key aspect of the CDR 30. The device includes a variety of inputs and outputs, such as RCA audio connections, which can easily integrate with existing home audio systems. The coaxial digital output allows for lossless connection to external digital-to-analog converters or other audio equipment, providing even more robust sound reproduction options.

In summary, the Harman-Kardon CDR 30 is an exceptional CD recorder that combines high-quality sound with advanced recording technology. Its ease of use, superb audio performance, and versatile functionality make it a compelling choice for any serious music lover looking to preserve and enjoy their audio collection.
Top Page Image Contents