Harman-Kardon CDR 2 CD Recording, Specially designed to accommodate CD-RW discs, Disc Dubbing

Page 20

CD Recording

Making recordings on the CDR 2 is simple and easy once you become accustomed to the basics of CD Recording. Before making your first recording, please take a moment to review the CDR Basics on page 14. In particular, you will need to become familiar with the types of discs that may or may not be used in the CDR 2. In addition, some terms used in the fol- lowing pages may be new to you. The following definitions and information will help you to make CD recordings using the CDR 2’s many features:

•The CDR 2 accepts analog inputs, digital coax inputs and digital-optical inputs. Before mak- ing a recording, be certain that you have selected the correct input.

•After a disc is recorded, it must be finalized. This process adds the final table of contents data to the disc and makes it playable on other machines. Until a disc is properly final- ized, it may not be played on any other machine.

•The CDR 2 may record on either CD-R or CD-RW discs, but they must be of the type specifically designed for use in consumer- audio CD recorders. These discs may be rec- ognized by looking for the words “Digital Audio” in the compact disc logo on the blank disc or its packaging. Discs with the logo reading only “Compact Disc/Recordable” are designed for computer data recording, and they will NOT work in the CDR 2.

•CD-R discs may not be erased or have material added to them once they have been finalized.

•At least four (4) seconds of blank recording time must remain on an unfinalized disc for recording to take place.

•The maximum number of tracks that may be recorded on a disc is 20. If more than 20 tracks are programmed, a FULL message will appear.

•Note that some CD-R/CD-RW audio recording discs may be used for single-speed recordings only. If you use a disc with such a warning, make certain not to dub at that 2x or 4x speed. However, the CDR 2 has been tested for compatibility with a wide range of blank discs from manufacturers throughout the world. In most cases, blank discs will produce high-quality recordings at any dub speed.

•In some rare cases, a CD player may not be compatible with CD-R discs. If you find that a CD-R disc plays in some players but not in others, the fault is most likely with the player, not with the recorded disc or the CDR 2. Remember that CD-RW discs made in the CDR 2 will play only in CD players that are

specially designed to accommodate CD-RW discs.

•Some commercial CD discs may contain a copy protection data bit that will prevent the disc from being dubbed. In that case, the Copy Prohibit Indicator G will light to remind you that the inability to record is intentional, and not the result of a problem with the CDR 2.

•This product is equipped with the Serial Copy Management System (SCMS) to protect the rights of copyright owners. As a part of this system, it is possible to make a copy of most CDs for your own personal use. However, it is not possible to make a digital copy from another digital copy. It is possible to make an analog copy of a digital copy.

RECORDINGS MAY BE MADE FOR PERSONAL USE ONLY, AND ANY UNAUTHORIZED COPYING IS SUBJECT TO THE APPLICABLE LAW.

•The CDR 2 will not copy DVD discs, computer- data discs, CD-based computer or video-game discs, or digital audio discs with a sample rate that is not compatible with the range of the CDR 2s sample-rate converter.

Recordings on the CDR 2 may be made in a number of ways:

•Discs may be dubbed using the playback deck on the CDR 2 as a source. These copies may be made in real time, at twice normal speed, or at four times normal playback speed.

•Recordings may be made from an external CD player or other digital source that is synchronized with the dub being made in the CDR 2.

•Recordings may be made from any compati- ble external digital source.

•Recordings may be made from an external analog source.

Disc Dubbing

The easiest way to make a copy of an entire disc is to use the CDR 2’s internal dub capability.

First, insert a blank or unformatted disc in the Record Drawer %. When the disc is inserted, the CDR 2 will examine it to determine if it

is a CD-R or CD-RW disc, and optimize itself for the best possible recording. This is indicated by OPC message in the Information Display K.

Next, select a dub speed. The default speed is a real-time dub, where the recording takes as long as the actual running time of the disc. However, with the CDR 2 you may also select 2x dubbing or 4x dubbing. Press the Speed

button s# to select a speed as indicated by the 2x/4x Indicators F. When no Speed Indicator lights, the unit is set to real-time recording. Note that the slower the record-dub speed, the more tolerant the unit is of errors on the blank disc. However, with most high-quality blank discs, the 2x and 4x speeds should not present a problem.

Place the disc to be dubbed in the Play Drawer 3 and wait until the Table of Contents data is read and the Information Display K shows the track and running time data for the disc.

When you are ready to start the dub, press the Dubbing Button l). The Play Deck will begin to read the track information again to make certain that there is enough space on the blank disc for the recording. If there is NOT sufficient room on the blank disc, a DISC FULL message will remind you to use another disc. During this process the Dubbing Indicator H will light, the Record Indicator

Twill flash and a BUSY message will flash in the Record Deck’s Information Display

K. When both Information Display Indicators return to normal, with indications of

01 00:00 press the Select Button j* to start the dub.

While the dub is in progress, you will see the track numbers and running time increase as the disc is copied. The Level Indicators will also flash but this is only for your reference, as record levels may not be adjusted during digital recordings. It is possible to listen to the disc while it is being dubbed by selecting the appropriate input on your receiver, preamp or processor:

Important Note: When a high-speed (2x or 4x) dub is being made, you will hear the play- back at the faster speed. Fast speed playback increases the pitch of a sound, and when played back at high volume levels this may damage your speakers. DO NOT use high vol- ume levels when listening to high-speed dubs while they are in progress.

The dub will stop automatically when the source disc has played through to the end. After the dub is finished, the Information Display will show an UPDATE message, and then return to normal operation. To manually stop a dub- bing operation, press the Stop button x&ü for either deck.

As with all recorded CD-R/CD-RW discs, the disc must be finalized before it can be played in other machines. See page 22 for instructions on disc finalization.

20CD RECORDING

Page 19 Page 21
Image 20
Page 19 Page 21
Contents CDR 2 CD Recorder CDR 2 Compact Disc Recorder Important Information About CD Recording Ergonomic Remote ControlIntroduction Safety Information Front-Panel Controls Play-Deck Open Press this button to open the Play DeckButton ùh Be played by simply pressing the Play button *hButton *h Level Indicators Time Indicators Repeat IndicatorsErase Indicator Front-Panel Information DisplayFRONT-PANEL Information Display AC Power Cord Rear-Panel ConnectionsPlay CDP-Deck Analog Output Record CDR-Deck Coaxial-DigitalRecord CDR-Deck Display Control 32 Power Off Clear Remote Control FunctionsPower-On Button Play CDP-Deck Open Press this button to open the Play Deck Installation and Connections Locating the CDRPlay-Deck Connections Record-Deck ConnectionsPower Connections BatteriesIR Remote Connections To the input of the other product or systemCD Recording Basics Disc TypesSo that additional tracks may be recorded on a disc Information Display for the Record DeckUsing The Remote Playback BasicsLight up Loading and Unloading DiscsTrack Skip Normal PlaySearch Dual-Play Mode Dual-Deck OperationTime Display Headphone ListeningProgram Play Repeat A-B CD Recording Specially designed to accommodate CD-RW discsRecordings on the CDR 2 may be made in a number of ways Disc DubbingPause buttons do not operate while a dub is in progress CD Sync RecordingTRK appears in the Record Deck Information Display K Recording from an External SourceFinalizing CD-R and CD-RW Discs Unfinalizing a CD-RW DiscErasing an Entire CD-RW Disc Erasing a Single TrackTroubleshooting Guide and Error Messages Technical Specifications Signal FormatPlayback Specifications Record Specifications

CDR 2 specifications

The Harman-Kardon CDR 2 is a remarkable piece of audio equipment that exemplifies the brand’s commitment to high-quality sound and advanced technology. Launched in the late 1990s as a combination CD player and digital recorder, the CDR 2 quickly garnered attention for its innovative features and user-friendly design.

One of the standout characteristics of the CDR 2 is its dual functionality. It allows users to play CDs while simultaneously recording audio onto CD-R and CD-RW discs. This flexibility makes it an ideal choice for audiophiles who wish to create custom playlists or archive their favorite tracks in high fidelity. The unit boasts a built-in digital-to-analog converter that ensures excellent sound quality, preserving the integrity of the audio throughout the recording process.

The CDR 2 features a sleek and stylish design that aligns with Harman-Kardon’s aesthetic. Its front panel displays a clear LCD screen, providing users with essential information such as track number, elapsed time, and recording status. The control layout is intuitive, enabling easy navigation through its myriad functions without the need for an extensive manual.

One of the key technological advancements found in the CDR 2 is its Advanced Digital Recording System, which minimizes jitter and enhances the overall quality of the recordings. It also offers various recording modes, including "track-at-once" and "disc-at-once," allowing users flexibility in how they wish to compile their recordings.

Additionally, the CDR 2 comes equipped with a comprehensive set of connectivity options. It features both analog and digital inputs and outputs, including optical and coaxial connections. This versatility allows users to integrate the unit seamlessly with existing audio systems, enhancing their overall listening experience.

The CDR 2 supports various disc formats and has a built-in programmability feature for easy selection and arrangement of tracks. The unit’s reliability and durability are further enhanced by its high-quality build, ensuring that users can enjoy their music for years to come.

In summary, the Harman-Kardon CDR 2 stands out in the realm of audio equipment for its combination of elegance, functionality, and superior sound quality. Its ability to serve as both a CD player and recorder, paired with its advanced recording technologies and user-friendly design, make it a treasured choice for music enthusiasts and collectors alike.
Top Page Image Contents