Installation
Wrap the threads on the nipples with Teflon tape.
Install the elbows. The elbow outlets should face downward.
Seal the wall around the elbows with waterproof sealant.
Failure to seal the wall can lead to possible water damage.
Drill the holes for the mounting screws with an 8 mm bit.
Do not drill into water lines!
Install the anchors.
Seal the wall around the anchors with waterproof sealant.
Failure to seal the wall can lead to possible water damage.
Install the screws. Install the nuts. There should be 9/16” between the rear of the nut and the surface of the wall.