7.For GDL 69A units, the audio portion is activated independently from the weather. The activations will not be simultaneous. Once the data channel is activated, bring up the XM Radio page on the GMX 200. This can be accomplished by pressing the FN key until XM is displayed. Press the XM smart key. A
8.Select an XM channel in order to lock in the radio activation.
Channels 0, 1, and 247 are free preview channels and should not be used for this procedure. Press either the Up or Down Arrow key and then press the SEL key to select a new channel. Wait for the channel to be displayed in the Active Channel box at the top of the XM display. The XM radio activation is complete when the channel is displayed.
6.2 Refreshing27B
If the unit is not activated after one hour a ‘refresh’ may be needed. To accomplish this go to the website www.xmradio.com/refresh as explained in Section 2X .2.X When asked for the Radio ID number on the website, enter the ID number of the service you are refreshing, either your audio package or your data (weather) package. If refreshing both, you’ll have the opportunity to ‘refresh another XM radio’. If you still are having trouble, call Garmin AT technical support using the telephone numbers listed on page iii.
6.3 Deactivating28Band Reactivating the GDL 69/69A
When the GDL 69/69A is not properly activated, in some cases it may be necessary to perform a full deactivation and reactivation of the system in order to make it work properly. This procedure is complicated and should never be attempted without the guidance of Garmin AT technical support personnel. Please contact Garmin AT technical support using the telephone numbers listed on page iii.
XM Activation Procedures | Page 25 |
Rev. H |