T2751 T4751, Model T2751, Modèle T2751

1	T2751

T4751

3/32"

(2.38 mm)

3/32 po

NOTE: The deck and valve rough-in must be finished before installing the trim kit.

Model T2751

Unscrew the test cap (1) and discard.

Model T4751

Remove set screw (1). Remove and discard test cap (2).

NOTA: Las tuberías internas del borde y de la válvula deben terminarse antes de instalar el juego de guarnición.

Modelo T2751

Destornille la tapa de prueba (1) y descarte.

Modelo T4751

Quite los tornillos de ajuste (1). Quite y descarte la tapa de prueba (2).

NOTE: l’installation de la plomberie du robinet et la finition de la plage doivent être terminées avant l’installation du kit de finition.

Modèle T2751

Desserrez le capuchon d’essai (1) et jetez-le.

Modèle T4751

Enlevez la vis de calage (1). Retirez le capuchon d’essai (2) et jetez-le.

2	T2751
2
			7				9	10
								10
								4
								4
			6					1
			6
					5
				8				2
								2
							3
	T4751
						9		10
		7						10
		7
								4
	6							1
								1
			5
			8
					3			2
					3

Place bases (1) with gaskets (2) over end valves (3) and secure with locknut (4). OPTION: Use silicone under the gasket if deck is uneven. Install gasket (5), base (6) and spout (7) on the spout adapter (8). Be sure spout is resting firmly on the deck. Install set screw (9) and tighten to secure the spout (7). Insert button (10) into set screw hole. Model T2751 proceed to step 4. Model T4751 pro- ceed to step 3.

Coloque las bases (1) con los empaques (2) sobre las válvulas extremas (3) y fije con la contratuerca (4). OPCIÓN: Use silicón por debajo del empaque si el borde está desnivelado. Instale el empaque (5), la base (6) y el tubo de salida (7) en el adaptador del tubo de salida (8). Asegúrese de que quede apoyado firmemente en el borde. Instale el tornillo de ajuste (9) y apriete para fijar el tubo de salida

(7). Instale el tapón (10) en el agujero del tornillo de ajuste. Modelo T2751, siga con el paso 4. Modelo T4751, siga con el paso 3.

Placez les bases (1) avec les joints (2) sur les soupapes (3) et fixez-les avec l’écrou autofreiné (4). FACULTATIF: si la plage est inégale, appliquez du composé d’étanchéité à la silicone sous le joint. Posez le joint (5), la base (6) et le bec (7) sur l’adaptateur de bec (8). Assurez-vous que le bec s’appuie fermement sur la surface. Posez la vis de réglage (9) et serrez-la à fond pour bien fixer le bec (7). Montez le bouchon (10) dans le trou pour la vis de calage. Si vous installez un modèle T2751, passez à l’étape 4. Si vous installez un modèle T4751, passez à l’étape 3.

5	53405 Rev. E

T4751, T2751 specifications

The Delta T2751 and T4751 are advanced temperature controllers designed to provide precise temperature management for a variety of industrial and commercial applications. These devices are known for their robustness, versatility, and user-friendly interfaces, making them essential tools for engineers and technicians in fields such as manufacturing, HVAC, and process control.

One of the main features of the Delta T2751 and T4751 is their ability to offer accurate temperature regulation across a wide range of environments. The controllers are equipped with high-resolution sensors that ensure a quick response time and reliable performance. This accuracy is crucial for processes that require precise thermal management to ensure product quality and operational efficiency.

Both models are designed with advanced PID (Proportional-Integral-Derivative) control algorithms. This technology allows for smooth and stable temperature control by continuously adjusting the output based on real-time readings. Additionally, users can fine-tune the PID parameters to suit specific applications, enhancing control precision and minimizing overshoot.

Another characteristic that sets the Delta T2751 and T4751 apart is their comprehensive communication capabilities. They support a variety of communication protocols, including Modbus, Ethernet, and RS-485, which enables seamless integration into existing automation systems. This connectivity helps facilitate remote monitoring and control, allowing operators to manage devices from a distance and enhance overall operational efficiency.

User-friendliness is a significant focus in the design of these controllers. Both models feature intuitive interfaces with clear LCD displays that provide real-time data and easy navigation through menus. This simplicity reduces training time for operators and minimizes the chances of operational errors.

For increased flexibility, the Delta T2751 and T4751 come with customizable input and output options. They can handle multiple input types, including thermocouples and RTDs, offering greater versatility for diverse applications. The output options vary as well, allowing users to choose between relay, SSR, or voltage outputs based on their specific requirements.

In summary, the Delta T2751 and T4751 temperature controllers are sophisticated devices that combine accuracy, advanced technology, and user-friendly design. Their robust capabilities make them ideal for industries where precise temperature control is critical, ensuring optimal performance and reliability in various applications.