Guide Wheel Replacement
Guide Wheels
Tangled Cable
If the Cable loops over itself in the Drum, it will not feed properly.With the motor stopped and cord unplugged, remove and reload the Cable by hand to restore proper functioning. If the Cable kinks, it is evidence of abuse and results from the use of too much pressure when drain cleaning, or use of the wrong size Cable for the drain pipe being cleaned. Do not force the Cable during use, let the cutter tool do the work.
Removing a Stuck Cable in the Drain Pipe
1.If the cable gets caught in the drain pipe move the Motor Direction Switch (5) to the Off position. Then, once the drum has stopped turning, move the Motor Direction Switch
(5) to the Reverse position to free the Cable.
2.If using the Power Cable Feed, putting the Motor in reverse will cause the feed Direc- tion Lever
3.Press the Foot Switch (14) while pulling on the Cable.
4.After the Cable is loose, move the Motor Direction Switch (5) back to the Forward posi- tion.
Caution: Running the Motor in reverse for more than a few seconds at a time can cause the Cable to tangle in the Drum.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION ORWARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER.THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 93188 | For technical questions, please call | Page 15 |