Specifications
| Formed and Welded Steel with |
| Forward / Reverse Gears | |
Construction | Features | Aluminum Friction Clutch | ||
Heavy Duty Motor and Steel Drum | ||||
|
|
| Cable Lockdown | |
| Heavy Duty 120 V~ | Power | 120 V~ / 60 Hz, 516 Watts | |
Electric Motor | 1/3 HP | 10.8 Amps Start up, | ||
Required | ||||
| 1785 RPM | 4.3 Amps running | ||
|
| |||
|
|
|
| |
Power Cord | #16 AWG X 3C, 6’4” long | GFCI | Class A, 120 V~ / 60 Hz, 20 Amp | |
Equipped | ||||
|
|
| ||
|
|
|
| |
Drum |
|
| Spring Steel with Coupler End | |
6” W x 13” Diameter | Cable Type | 50’ L x ½” Cable Diameter | ||
Dimensions | ||||
|
| (0.123” Wire Diameter) | ||
|
|
| ||
|
|
|
| |
Overall | 40” H at Handle | Pipe | For use with pipes having | |
17” W x 22” L | ||||
Dimensions | Compatibility | |||
Net Weight: 87.3 lb. | ||||
|
|
| ||
|
|
|
|
CAUTION: DO NOT USE THIS DRAIN CLEANER ON DRAIN LINES SMALLER THAN TWO INCHES. DAMAGE MAY OCCUR TO EQUIPMENT OR PIPES.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instruc- tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
General Safety Rules
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operating a power tool. Dis- tractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.
SKU 93188 | For technical questions, please call | Page 2 |