H2O Audio iDV1-5A1, iDV1-75 manual To Close Case, IV. Install batteries

To Close Case

1.Close lid

2.Rotate the cam knob clockwise 180°

3.Close the cam knob lock

IV. Install batteries

1.Open case.

2.Disconnect and remove iPod from case if installed.

3.Turn the battery cover screw counter-clockwise until the screw loses contact with the insert plate.

4.Remove battery cover.

5.Install 3 AA batteries in the battery compartment. Make sure the positive and negative ends of the battery are oriented per the inscribed markings in the case.

6.Reinstall and close battery cover.

V. Install iPod specific inserts and height adjusters

The inserts and height adjusters are used to securely hold your iPod in the correct location inside the case.

Consult the following chart to determine which inserts and height adjusters should be used with your iPod model.

Please note some iPod models will not require height adjusters.

iPod Model	Upper Insert Letter	Lower Insert Letter	Height Adjuster
			Number
iPod touch	A	B	1
iPhone*	A	A	N/A
iPhone 3G*	A	A	N/A
iPod 5th Gen (30Gb)	B	B	2
iPod 5th Gen (60/80Gb)	B	B	N/A
iPod classic (80Gb)	B	B	4
iPod classic (160Gb)	B	B	3
iPod nano 1st Gen	C	C	N/A
iPod nano 2nd Gen	C	C	N/A
iPod nano 3rd gen	D	D	N/A

*The iDive300 is not certified to work with the iPhone or iPhone 3G and will cause interference with phone capabilities.

7 8