American Standard T555.500, T555.502, T555.501 Install Trim, Install Handle, Adjust HOT Limit Stop

1 INSTALL TRIM

CAUTION: Protect finish on SHOWER ARM,

SHOWER HEAD and TUB SPOUT when installing.

When finished tiling the wall, remove PLASTER GUARD (A) and turn off water supply.

Push CAP (1) over VALVE CARTRIDGE (2).

Mount ESCUTCHEON (3) to valve body with SCREWS (4).

Remove PIPE CAPS (5) from shower pipe and tub filler pipe.

Install SHOWER ARM (6), SHOWER HEAD (7) by threading onto pipe nipples using teflon tape or pipe sealant.

Install SLIP-ON TUB SPOUT (8). Tighten with

HEX WRENCH supplied.

2 INSTALL HANDLE

Install HANDLE BUSHING (1) onto CAP (2).

Find correct position of HANDLE (3) and push HANDLE (3) onto VALVE STEM (4).

Install HANDLE SCREW (5) and push in INDEX CAP (6).

Check proper operation of HANDLE.

Turn water supply on and test installed fitting. Operate valve and diverter spout.

7

3

6

1

5

2

5

A

6

3

1

5

4 2

4

. REF

1 -3/4"

8 HEX WRENCH

3 ADJUST HOT LIMIT STOP

By restricting HANDLE rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP (1) reduces risk of accidental scalding. To set the maximum hot water temperature of your faucet, you need to adjust the setting on the HOT LIMIT SAFETY STOP (1).

Turn CARTRIDGE STEM (2) to the OFF position (coldest setting) before making adjustment to HOT LIMIT STOP (1). Use a flat blade screwdriver to pry free the HOT LIMIT SAFETY STOP (1).

Pull forward and rotate counterclockwise one number to limit hot water temperature.

Use ARROW (3) on CARTRIDGE (4) and NUMBERS (5) on HOT LIMIT STOP (1) for indication.

		579	11
	3			3
1
0				1
					5
						1

2

3

5

1 3

4

2

					1
					5
					1
					3
				1	1
			9
		7
	5
3
1

4

COLDER

(Larger Numbers)

0 1 3 5 7 9 11 13 15

HOTTER

(Smaller Numbers)

0 1 3 5 7 9 11 13 15

5

					51
					1
					3
					1
				9	1
			7
		5			1
	3
1

M968235 Rev. 1. 5