Frigidaire 309000848 manual To Operate On FAN only Do this, To USE Energy Saver Feature Do this

Air Conditioner Features

(continued)

STEP 5 — TO OPERATE

ON FAN ONLY:

☞ ☞ ☞ ☞

DO THIS:

PRESS ON

(if not running)

PRESS

FAN ONLY

CHOOSE ONE

YOU WILL SEE:

72

Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer.

During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.

STEP 6 — TO USE THE

ENERGY SAVER FEATURE:

☞

DO THIS:

PRESS

ENERGY SAVER

YOU WILL SEE:

72

Note: In this mode, when the compressor shuts off, the fan will continue to run for another 3 minutes, then shut off until cooling is needed, as sensed by the room temperature control. During this time, it may come on for 3 minutes to sense whether cooling is needed, then it will go off for 10 minutes. It will continue doing this to sample the room air for as long as necessary.

STEP 7 — TIMER-DELAY

STOP FEATURE

72 ☞

☞

Note: The unit must be running to make this setting.

DO THIS:

PRESS

(if unit is not

running)

PRESS

YOU WILL SEE:

0.5

Proceed as in step 9 to change the desired number of hours, before the control will time out and turn off.

8