Frigidaire 309000848 manual YOU will see Time Chosen Do this, Sleep Feature

Air Conditioner Features

(continued)

STEP 8 — TIMER-DELAY
START FEATURE:	YOU WILL SEE:

☞

☞

Note: To do this, the unit must be in the off position.

DO THIS:

PRESS OFF

(If unit is running)

PRESS TIMER/OFF

0.5

When first set, the display will show .5. (one half hour),to increase the time up to 24 hours, go to step 9.

STEP 9 — TO INCREASE DELAYED START TIME:

0.5 ☞

YOU WILL SEE TIME CHOSEN:

72

DO THIS:

PRESS

Note: Tap or hold the UP arrow(^) to increase delayed start time by .5 hours (up to 10 hours), then in 1 hour increments up to 24 hours. The control will count down the time remaining until start (8, 7.5, 7, etc.).

The unit will then come on in Cool and HI fan mode. The temperature maintained will be the same as you previsouly set. If you want to change it, Press ‘Cool” or “Energy Saver Mode” pad, whichever you desire, then Up or Down arrows until the desired temperature is indicated on the display. Pressing timer “On/Off” or after 5 seconds, the control will automatically change the display back to the hours remaining until the unit will start.

Switching unit on at any time will nullify this setting.

STEP 10 — SLEEP FEATURE: YOU WILL SEE:

☞

72

DO THIS:

PRESS SLEEP

PAD

Note: In this “MODE” the selected temperature will increase by 2 degrees F 30 minutes after the mode is selected. The temperature will then increase by another 2 degrees F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the “Sleep” MODE and the unit will continue to operate as originally programmed. The “Sleep” MODE program can be cancelled at any time during operation by pressing “Sleep” MODE, “On/Off”, “Fan Only” or the “ V / V” buttons, on either the Control or the Remote. “Time Delay Stop” limit reached will also end “sleep” MODE.

9