Air Conditioner Features
(continued)
TO OPERATE FAN ONLY: |
| YOU WILL SEE: | LIGHT On |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
TO USE THE ENERGY SAVER FEATURE:
DO THIS:
PRESS
MODE BUTTON
CHOOSE
ENERGY SAVER
SLEEP FEATURE:
DO THIS:
PRESS
SLEEP BUTTON
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency). You can choose any fan speed you prefer.
During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode.
YOU WILL SEE: | LIGHT On | ||
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
Note: In this mode, the fan will continue to run for 3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the unit turns back on.
YOU WILL SEE: | LIGHT On | ||
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
Note: In this "MODE" the selected temperature will increase by 2 degrees F 30 minutes after the mode is selected. The temperature will then increase by another 2 degrees F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the "Sleep" MODE and the unit will continue to operate as originally programmed. The "Sleep" MODE program can be cancelled at any time during operation by pressing "Sleep" MODE button.
7