Remove Air Conditioner from Cabinet | Frigidaire 2020219A0951

Foam Gasket

Installation Instructions

Window Mounting

1Remove Air Conditioner from Cabinet

NOTE: Remove any packaging material from cabinet exterior.

1.Pull down on front grille from upper edge. Lift front grille upwards and place to one side. (See FIG.1)

2.Remove filter. To remove, grasp in the middle on each side. Bow filter out to detach top edge from tabs. Once top

is free, lift filter up and out.

FIG.2

FIG.1

Front Grille

3.Locate the four Front Panel screws and remove. These screws will be needed to re-install the Front Panel later (See FIG.2).

4.Push metal cabinet side inward to release plastic tabs on each side of Front Panel (see Fig. 3).

5.Rotate Front Panel up until top tabs are free. Pull panel straight out. When pulling out, front panel will also pull free from vent control lever. Depress latch on electronics plug (on some models) to disconnect.

6.Remove Front Panel from unit (see Fig. 4).

FIG.3

FIG.4

base pan handle

7.Remove shipping screws from top of unit and also on both sides by the base if installed. (See FIG.5)

8.With the aid of an assistant, hold the cabinet while pulling on the base pan handle (see FIG. 4), and carefully remove the air conditioner from cabinet.

9.Add two foam inserts to holes in top of cabinet where shipping screws were removed from. (See FIG.6)

10.Heavy duty models (22,000~28,500BTU) come with internal shipping packaging. THIS PACKAGING AND PLASTIC TIES MUST BE REMOVED PRIOR TO INSTALLING THE AIR CONDITIONER BACK INTO THE CABINET. (See FIG.7)

11.Remove plastic wrapping from all points on power cord.

FIG.7

FIG.5	shipping
	shipping	Shipping Packaging
	screws	Shipping Packaging

FIG.6

Plastic tie

2Install Top Angle Rail and Side Retainers

1.Remove adhesive strip coating from foam gasket. Attach adhesive side of gasket to bottom of top angle rail. Insert 4

screws from inside of cabinet and secure to top angle rail.	FIG.8	Top angle rail
2. From inside of cabinet insert 3 screws to attach each side retainer as shown
in Fig. 8. Attach side retainers with flat side against cabinet and angled edge toward
rear of cabinet.

3Assemble Window Filler Panels

1.Place cabinet on floor, a bench, or a table.

2.Slide "I" section at end of window filler panel into side retainer on each side of the

cabinet (see FIG. 9 and FIG.10).

3. On each side of cabinet, insert top and bottom legs of window filler panel frame into channel in the top and bottom angle rails.

4. Insert a 7/16" locking screw and flat washer into hole on top leg of each window filler panel (see section 6). Do not

totally tighten. Allow leg to slide freely. Screws will be tightened after Section 6.

2020219A0951 specifications

The Frigidaire 2020219A0951 is a refrigerator designed to combine advanced functionality with style and convenience for modern households. This appliance is engineered with a focus on energy efficiency, ensuring minimal impact on your utility bills while maintaining optimal food storage conditions.

One of the standout features of the Frigidaire 2020219A0951 is its spacious interior, which offers ample storage for all your groceries and perishables. The refrigerator is equipped with adjustable shelves that can be tailored to accommodate larger items, providing flexibility and convenience for users. Additionally, the crisper drawers are designed to maintain humidity levels, preserving the freshness of fruits and vegetables for extended periods.

Incorporating cutting-edge technology, this model features a frost-free operation, eliminating the need for manual defrosting and ensuring hassle-free maintenance. The unit is also designed with advanced cooling systems that provide consistent temperature control throughout the refrigerator and freezer sections, contributing to better food preservation and reduced spoilage rates.

The Frigidaire 2020219A0951 also places a premium on user-friendly operation. Its intuitive controls allow for easy temperature adjustments, and many models come with a digital display that provides real-time information at a glance. Additionally, the energy-efficient LED lighting illuminates the interior, making it easy to locate items, even in low lighting.

Safety is a key characteristic of this refrigerator, with door alarms that notify users when the refrigerator door has been left open, thus helping to prevent food spoilage and maintain energy efficiency. The unit also features a robust build quality with a stainless steel finish that resists fingerprints and smudges, offering both aesthetic appeal and reduced cleaning time.

Overall, the Frigidaire 2020219A0951 is more than just a refrigerator; it is an essential home appliance that balances style, convenience, and performance. With its variety of features and technologies, it meets the needs of families and individuals alike, ensuring that food storage and preservation are part of a seamless kitchen experience. Whether upgrading your current refrigerator or investing in your first appliance, the Frigidaire 2020219A0951 promises to deliver reliable service and satisfaction for years to come.