Install Window Sash Seal and Safety Lock

Installation Instructions

6Extend Window Filler Panels and attach to top angle rail:

1.Carefully raise window to expose filler panel locking screws on top angle rail. Loosen screws so filler panels slide easily.

2.Extend panels to fill window opening completely. Tighten locking screws on top (FIG. 16).

3.Close window behind top angle rail.

4.$WWDFKWKHWRSDQJOHUDLOWRZLQGRZIUDPH8VHDƎGULOOELWWRGULOORQHKROHWKURXJKWKHKROHLQWKHPLGGOHRIWRS DQJOHUDLOLQWRWKHZLQGRZIUDPHDQGGULYHRQHƎHEX-HEAD locking screw through the hole in the middle of top angle rail into the window frame as shown (FIG. 17).

FIG.16

LOCKING SCREWS

FIG. 17

ƎLocking Screw and Washer

ƎORQJ

HEX-HEAD SCREW

7Attach Window Filler Panels to Window Frame

1.	Extend the window filler panels out against the window frame.		C	FIG. 18A
1.
2.	Use a 1/8" drill bit to drill a starter hole through the hole in the	Window Sash
top leg of each window filler panel and into the window sash

(Fig. 18A and Fig. 18B). Connect with one 10x3/4" screw.

FIG. 18B

weather seals

8Install Window Sash Seal and Safety Lock

1.Trim window sash seal to fit window width. Insert it into space between upper and lower sashes as shown (FIG. 19).

2.Attach right angle safety lock to top window sash as shown (FIG.20).

3.If necessary, trim weather seals to needed length, peel

off protective backing, and use to plug any gaps. See Fig. 18B.

A.;ƎURXQGKHDG screw

B.left-hand Window Filler Panel Top Leg

C.Window channel

A.;ƎURXQGKHDG screw

FIG.19FIG.20

FIG. 21

WINDOW		SAFETY LOCK

SASH SEAL

ƎORQJ hex-head

screws

Vent control correct location

9Install Air Conditioner into Cabinet and Install Front Panel to Unit

1.Lift air conditioner and carefully slide into cabinet.

2.CAUTION: Do not push on controls OR finned coils.

3.Be sure air conditioner is firmly seated towards rear of cabinet.

4.Reconnect electronics plug if present. Position vent control lever so that it will thread into its channel in the front panel (see FIG.21). Hook front panel top tabs into slots on cabinet top, and rotate front panel down so that side tabs snap into place on cabinet. Insert 4 previously removed screws through front panel and into air conditioner.

5.Insert air conditioner filter. Reinstall the front grille by hooking bottom tabs into slots on Front Panel bottom, then rotating grille up to snap into place.

2020219A0951 specifications

The Frigidaire 2020219A0951 is a refrigerator designed to combine advanced functionality with style and convenience for modern households. This appliance is engineered with a focus on energy efficiency, ensuring minimal impact on your utility bills while maintaining optimal food storage conditions.

One of the standout features of the Frigidaire 2020219A0951 is its spacious interior, which offers ample storage for all your groceries and perishables. The refrigerator is equipped with adjustable shelves that can be tailored to accommodate larger items, providing flexibility and convenience for users. Additionally, the crisper drawers are designed to maintain humidity levels, preserving the freshness of fruits and vegetables for extended periods.

Incorporating cutting-edge technology, this model features a frost-free operation, eliminating the need for manual defrosting and ensuring hassle-free maintenance. The unit is also designed with advanced cooling systems that provide consistent temperature control throughout the refrigerator and freezer sections, contributing to better food preservation and reduced spoilage rates.

The Frigidaire 2020219A0951 also places a premium on user-friendly operation. Its intuitive controls allow for easy temperature adjustments, and many models come with a digital display that provides real-time information at a glance. Additionally, the energy-efficient LED lighting illuminates the interior, making it easy to locate items, even in low lighting.

Safety is a key characteristic of this refrigerator, with door alarms that notify users when the refrigerator door has been left open, thus helping to prevent food spoilage and maintain energy efficiency. The unit also features a robust build quality with a stainless steel finish that resists fingerprints and smudges, offering both aesthetic appeal and reduced cleaning time.

Overall, the Frigidaire 2020219A0951 is more than just a refrigerator; it is an essential home appliance that balances style, convenience, and performance. With its variety of features and technologies, it meets the needs of families and individuals alike, ensuring that food storage and preservation are part of a seamless kitchen experience. Whether upgrading your current refrigerator or investing in your first appliance, the Frigidaire 2020219A0951 promises to deliver reliable service and satisfaction for years to come.