Mitsubishi Electronics MSZ09UN, MSZ12UN Ation, Press the Emergency OPERA- Tion switch

Page 12

ATION

Handling of the remote controller

The range that the signal can reach is about 20 ft. when the remote controller is pointed at the front of the indoor unit.

When a button is pressed, one or two beeps will be heard from the indoor unit. If no sound is heard, operate again.

Use the remote controller carefully.

If it is dropped, thrown or it gets wet, the remote controller may not operate.

When installing on a wall, etc.

Install the remote controller holder in a position where the signal reception sound (beep) can be

heard from the indoor unit when the ON/OFF button is pressed.

How to install/remove the remote controller

Installing

Insert the remote controller downward.

 

 

Removing

Pull it up.

 

 

Remote controller holder

Dry-cell batteries

Reference for replacing batteries

When the indoor unit does not respond to the signal from the remote controller, or the display becomes dim, replace the batteries with new ones (size AAA).

Though both alkaline batteries and manganese batteries can be used, alkaline batteries are rec- ommended because their service life is longer than that of manganese batteries.

The service life of an alkaline battery is about 1 year. However, a battery which the time limit is ap- proaching may be exhausted soon. The recom- mended usable time limit is indicated (month/year) on the bottom of the battery.

Replace the 2 batteries with new ones of the same type.

Do not use rechargeable batteries.

To prevent liquid leakage, take out all batteries when the remote controller is not going to be used for a long time.

Dispose of exhausted batteries in the correct man- ner.

When the remote controller cannot be used (emergency operation)

When the batteries of the remote controller run out or the remote controller malfunctions, the emergency op- eration can be done using the EMERGENCY OPERA- TION switch.

1Press the EMERGENCY OPERA- TION switch.

*Each time the EMERGENCY OPERATION switch is pressed, the unit will operate in order of EMERGENCY COOL MODE, EMERGENCY HEAT MODE and STOP MODE.

However, when the EMERGENCY OPERA- TION switch is once pressed, the unit will oper- ate in test run for 30 minutes and then the op- eration mode shifts to EMERGENCY MODE.

MSZ09UNMSZ12UN

Details of EMERGENCY MODE are as shown below. However, the temperature control does not work for 30 minutes in test run and the unit is set to continuous operation. The fan speed is set to High in test run and shifts to Medium after 30 minutes.

Operation mode

COOL

HEAT

 

 

 

Set temperature

75 °F

75 °F

 

 

 

Fan speed

Medium

Medium

 

 

 

Horizontal vane

Auto

Auto

 

 

 

The operation mode is indicated by the Operation Indi- cator lamp on the indoor unit as following figures.

Operation Indicator lamp

MSZ09UN

EMERGENCY COOL EMERGENCY HEAT

STOP

Operation

Operation

Operation

Indicator

Indicator

Indicator

MSZ12UN

 

 

EMERGENCY COOL EMERGENCY HEAT

STOP

Operation Indicator

Operation Indicator

Operation Indicator

To stop the emergency operation, press the EMERGENCY OPERATION switch once (in case of EMER- GENCY HEAT MODE) or twice (in case of EMERGENCY COOL MODE).

Image 12
Contents Operating Instructions Contents Safety Precautions Customer should not install this unit Do not turn the breaker off/on during operationRepairs or relocation should not be done by the customer This could damage your healthDo not operate switches with wet hands Do not clean the air con- ditioner with waterVentilate well in using the unit with a stove, etc Do not use an insecticide or flammable sprayDo not step or put any- thing on the indoor/out- door unit Replace the 2 batteries with new ones of same typeDo not install the unit where flammable gas could leak Consult your dealer for installation of the air conditionerGround the unit Name of Each Part Indoor unitOutdoor unit Remote controller Mode MIN Open the front lidPreparation Before Opera Auto restart functionBreaker for the air conditioner Press the Emergency OPERA- Tion switch AtionDescription of I FEEL... mode FEEL... Auto OperationTo start operation Press the button.ON/OFF To stop operation Press the buttonDetails of display on the indoor unit Description of Auto Restart FunctionTo select the COOL, DRY or Heat mode Manual Operation COOL, DTo stop operation Details of the display on the indoor unit are explained onRY, Heat Cool For effective coolingDRY The humidity at which people feel comfortable Cooling operation, when the air conditioner is op AIR Flow Velocity and DireTo change the AIR Flow velocity, press the FAN button Recommended horizontal vane rangeCtion Adjustment Auto air flow direction control operationHow to set the on timer Set the time of the timer using the HR. and MIN. buttonsTo release the OFF timer Press Stop button Press the Start button during operationWhen it is not going to be used for a long time When the air conditioner is to be used againClean the air filter and install it in the in- door unit Turn off the breakerMaintenance Before starting maintenanceCleaning the indoor unit Clean the unit using a soft dry clothCleaning the air filter about once every 2 weeks Cleaning the deodorizing filter about once every 2 weeksRemove the air filter Deodorizing filter replacement about once a year Air cleaning filter replacement about once every 4 monthsRemove the air cleaning filter White bel- lows type Remove the deodorizing filter Gray sponge typeCheck the following Following cases, stop operation and consult your dealerWhen YOU Think That Troub Question Answer not a malfunctionBLE has Occurred INSTALLATION, Relocation a Installation placeElectrical work Inspection and maintenance ND InspectionOperating sound considerations RelocationPage Specifications are subject to change without notice

MSZ12UN, MSZ09UN specifications

Mitsubishi Electronics has established itself as a leader in innovative climate control technology, and the MSZ09UN and MSZ12UN air conditioning units exemplify the company's commitment to energy efficiency, advanced technology, and user comfort. Both models are part of the MULTI-ZONE series, designed for residential and commercial spaces seeking an optimal balance between performance and energy savings.

The MSZ09UN, with a cooling capacity of 9,000 BTU, and the MSZ12UN, with a cooling capacity of 12,000 BTU, are ideal for small to medium-sized rooms. Their sleek and modern design allows them to blend seamlessly into any interior, while their quiet operation ensures that occupants can enjoy a comfortable environment without disruptive noise.

One of the standout features of both models is Mitsubishi's advanced inverter technology. This technology allows the units to automatically adjust the compressor's speed to maintain the desired temperature more efficiently. As a result, both units operate with lower energy consumption, which is especially appealing to environmentally conscious consumers. The inverter system not only enhances energy efficiency but also provides faster cooling and heating, ensuring that the desired temperature is reached quickly.

Both the MSZ09UN and MSZ12UN come equipped with a high-efficiency filter that captures dust and allergens, contributing to improved indoor air quality. Some models also feature optional plasma air purification technology, which further enhances air cleanliness by effectively eliminating bacteria and virus particles.

In terms of user convenience, these models offer easy-to-use remote controls, allowing users to adjust settings from a distance. They also support various operational modes, including cooling, heating, dehumidification, and fan-only modes, making them versatile solutions for year-round climate control.

Another notable characteristic is their compatibility with Mitsubishi's Kumo Cloud technology, enabling users to control their units remotely via smartphone apps. This feature provides enhanced convenience, allowing users to monitor and adjust their home's climate from virtually anywhere.

Overall, the Mitsubishi MSZ09UN and MSZ12UN air conditioners represent a perfect blend of technology, efficiency, and user-friendly features, making them excellent choices for anyone seeking reliable climate control solutions for their living or working spaces.