Mitsubishi Electronics MSZ12UN, MSZ09UN FEEL... Auto Operation, Description of I FEEL... mode

With the “ (I FEEL...)” auto operation mode, the optimum room condition can be set automati- cally with a one-touch operation.

•To start operation:

■Press the button.ON/OFF

When the “ (I FEEL...)” mode is selected, the air conditioner is automatically controlled at the optimum temperature.

˚C

CLOCK

AMPM

AMPM

ON/OFF TOO TOO

WARM COOL

•To stop operation:

■Press the button.

•If you feel slightly warm:ON/OFF

TOO

■Pressture. the button to lower the tempera-

One press lowers the temperature by about 2 °F.WARM

•If you feel slightly cool:

TOO

■Pressture. the COOL button to raise the tempera-

One press raises the temperature by about 2 °F.

When “ (I FEEL...)” is not selected, press the MODE button until it is set.

Each time the button is pressed, the operation mode is changed in sequence: (I FEEL...) → (COOL) → (DRY)

→(HEAT)

Description of “I FEEL...” mode

Details of operation

According to the room temperature when the operation starts, the opera- tion mode is automatically set to COOL, DRY or HEAT. However, when operation is started again within 2 hours after it is stopped, the same operation mode before the operation is stopped is selected. The opera- tion mode selected first is not changed even if the room temperature changes. If the operation mode does not match the room condition, se- lect the appropriate operation mode by pressing the MODE button.

Details of auto operation

Room temperature: About 77 °F or higher

→COOL

About 77 °F - 73 °F→ DRY About 73 °F or lower

→HEAT