Checking Drainage | Mitsubishi Electronics PFD-P250500VM-A manual

10. Checking Drainage

Check that water is able to drain smoothly. If water is unable to drain smoothly, check for blockage of the grooves in the drain pan and the piping trap by paper particles etc. Carefully clean the grooves in the drain pan and the piping trap to prevent further blockage.

Ensure that the trap is always water-sealed.

11. Checking V Belts

1.Adjust parallel of the fan and motor pulleys in accordance with Fig.B-1.

2.Adjust the tension of each V belt so that the deflection load (W) at the optimum deflection (r= 5 mm) is as shown in Fig.B-2.

3.It is recommended that the belt be adjusted to the optimum tension as shown in Fig.B-2after it has been run-in on the pulley (24 - 28 hours operation). When a new belt is fitted, adjust the deflection load (W) to approximately 1.3 times the maximum value.

4.It is recommended that the V belt be replaced every 8000 hours. It has reached the end of its life when it has stretched by approximately 2% (including an initial stretch of approximately 1%) of the initial circumference.

[Fig. B-1] (P.4)

Parallel	K (minutes)	Remarks
Pulley

Cast iron pulley 10 or less		Equivalent to 3 mm displacement per meter.

[Fig. B-2] (P.4)

ADeflection load (W) 3 - 4kg

12.Cleaning the Indoor Unit Heat Exchanger

When dust adheres to the heat exchanger after the unit has been used for a long time, reducing the efficiency of heat exchange, and resulting in deterioration of cooling performance.

Please ask your dealer how to clean it.

13. Greasing the Fan Bearings

Replenish bearing grease annually to ensure that the bearings may be used with	Shell	Albania Grease 2
confidence a long time. Such replenishment extends the life of both the grease and	Quantity	10.5 g
the bearings. Use the following grease.

14. When the Unit is to be out of Use for a Long Time

<When the Unit is to be out of Use for a Long Time>

(1)Run the unit in Fan mode for a period of 4 - 5 hours to dry the indoor unit.

(2)Turn the indoor unit power OFF.

<Preparations for Reuse>

sCheck the following (1) - (4), then turn the power supply on.

(1)Clean and fit the filter.

(2)Check that the inlets and outlets on the indoor and outdoor units are not blocked.

(3)Check that the earth wire is connected. The earth wire may be connected with the indoor unit as well in some cases.

Caution:

Do not connect the earth wire to gas pipes, water pipes, lightning rods, or telephone earth wires. If earthing work is not conducted carefully it may result in electric shock, smoke, flame, or mis-operation due to electrical noise. Please ask your dealer before beginning earthing work.

(4)Check to ensure that the drain hose is not bent, the tip is not raised or blocked, and that the trap has not been damaged, and fill the trap with water.

(5)Turn the power supply on before 12 hours or more.

PFD-P250500VM-A specifications

The Mitsubishi Electronics PFD-P250500VM-A is a cutting-edge piece of equipment that exemplifies the company's commitment to advanced engineering and innovative technology in the field of power and automation solutions. Designed for robust performance, this model serves as a high-efficiency inverter that integrates seamlessly into various industrial applications.

One of the primary features of the PFD-P250500VM-A is its high power output capacity. With a maximum output of 250 kVA, it caters effectively to high-demand environments, ensuring reliable and stable power supply for heavy machinery and equipment. This inverter is designed to optimize power consumption, thus enhancing energy efficiency and reducing operational costs for users.

The design of the PFD-P250500VM-A also emphasizes versatility, allowing it to function in multiple configurations. It supports different voltage levels and can be adapted for specific applications and requirements. This characteristic makes it an ideal choice for diverse industries, including manufacturing, utilities, and commercial sectors.

Incorporating advanced control algorithms, the PFD-P250500VM-A boasts precise torque and speed control capabilities, providing exceptional responsiveness and stability. This feature is crucial for applications that require consistent and accurate performance under varying load conditions. Furthermore, its built-in protection mechanisms safeguard against over-voltage, under-voltage, and overheating, ensuring longevity and reliability in demanding environments.

The product's user-friendly interface includes a display panel that allows for easy monitoring and adjustments. This accessibility is complemented by communication protocols ensuring connectivity with other systems, making integration into existing setups straightforward.

In terms of technology, the PFD-P250500VM-A employs state-of-the-art semiconductor technology, ensuring minimal losses during operation. This contributes not only to the efficiency of the unit but also to lower environmental impact by maximizing energy usage.

Lastly, Mitsubishi's commitment to quality assurance is evident in the PFD-P250500VM-A, which undergoes rigorous testing before release. This dedication to excellence ensures that the unit meets international standards and offers peace of mind to users regarding its reliability and performance.

In conclusion, the Mitsubishi Electronics PFD-P250500VM-A stands out as a premier solution for industrial power requirements, combining high output capacity, advanced control features, and robust safety measures, making it an indispensable asset for industries seeking efficiency and reliability.