To Operate, Care and Cleaning | GE JN327, JV327, JV337, JV347

To Operate

Vents (JN327 & JV347)

Fan switch

Lamp switch

Lamp Switch Models: JN327, JV327, JV337

Press for OFF and ON.

Lamp Switch Model: JV347

Rotate clockwise, first position for NIGHT LIGHT, second position for BRIGHT LIGHT.

Fan Switch

Models: JN327, JV327, JV337

CENTER position OFF, DOWN position LOW SPEED, TOP position HIGH SPEED.

Model: JV347

Rotate Clockwise, FIRST position HIGH, SECOND position MEDIUM, THIRD position LOW.

Care and Cleaning

Replaceable Charcoal Filter—Used in non-ducted installations only.

Models: JN327, JV347—non-ducted installations only

The charcoal filter cannot be cleaned. It must be replaced.

DO NOT RINSE OR PLACE THE CHARCOAL FILTER IN A DISHWASHER.

The efficiency of your hood depends upon a clean filter. The frequency of filter replacement depends on hood use and the type of cooking you do. See replacement guidelines below for your non-ducted model installation.

NEVER OPERATE THE HOOD WITHOUT THE FILTER IN PLACE.

When to replace the filter:

JN327 and JV347 (non-ducted installations only)—The filter should be replaced after 6 to 12 months. Order and replace with genuine GE part: WB02X10700.

To remove: Pull down on the center of the front edge of the filter. The filter will then slip out of the retaining tabs on the back.

To replace: Slip the back edge of the filter into the retaining tabs and push the front edge up until it snaps in place.

Reusable Metal Grease Filter—Used in ducted installations only.

Models: JV327, JV337, JV347—ducted installations only

The efficiency of your hood depends on a clean filter. Frequency of cleaning depends on hood use and the type of cooking you do. HOWEVER, THE GREASE FILTER SHOULD BE CLEANED AT LEAST ONCE A MONTH.

NEVER OPERATE THE HOOD WITHOUT THE FILTER IN PLACE.

To remove: Pull down on the center of the front edge of the filter. The filter will then slip out of the retaining tabs on the back.

To clean: Soak and then agitate it in a hot water and detergent solution. Light brushing can be used to remove embedded dirt. Rinse, shake and let it dry before replacing.

To replace: Slip the back edge of the filter into the retaining tabs and push the front edge up until it snaps into place.

With careful handling, the metal filter will last for years. If a new replacement becomes necessary, order the part from your dealer. Order genuine GE part: WB02X8391.

Hood

Clean grease laden surfaces of the hood frequently. Use warm detergent solution. About 1 tablespoon of ammonia may be added to the water. TAKE CARE TO NOT COME IN CONTACT WITH FILTERS AND OTHER NON-ENAMELED SURFACES. The hood shell can be washed, rinsed and dried with a soft cloth.

CAUTION: Be certain when cleaning the hood surfaces you do not touch the lamp bulb with moist hands or cloth. A warm or hot lamp bulb may break if touched with a moist surface. ALWAYS let lamp cool COMPLETELY before cleaning around it.

Motor and Fan

To Clean Motor and Fan

1.DISCONNECT THE HOOD POWER SUPPLY AT THE HOUSEHOLD DISTRIBUTION PANEL BY REMOVING THE FUSE OR SWITCHING OFF THE CIRCUIT BREAKER.

2.Remove the filter.

3.Wipe the fan blade and motor with cloth, dampened only in ammonia and warm water solution.

4.Replace the filter.

5.Reconnect the hood power supply.

JN327, JV327, JV337, JV347, JN327, JV327 specifications

The GE JN327, JV327, JV337, JV347, and JN327 models represent a significant advancement in the field of industrial automation and control systems. These models are engineered to enhance efficiency, precision, and adaptability in various industrial applications.

The GE JN327 is a robust control system designed for versatile applications. One of its standout features is its high-performance processor, which ensures rapid data processing and response times. This model incorporates advanced data acquisition technologies, allowing for real-time monitoring of industrial processes. The integration of robust communication protocols ensures seamless connectivity with various devices, streamlining operational workflows.

The JV327, a variant in the series, is particularly known for its emphasis on user-friendly interfaces. Its intuitive design allows operators to easily navigate through complex data sets and control operations, minimizing the learning curve associated with new systems. The JV327 supports touch-screen technology, enhancing interactivity and accessibility for users.

The JV337 model takes a step further with enhanced safety features. It complies with international safety standards and incorporates redundancy systems to minimize the risk of failure in critical operations. This model is ideal for industries where safety is paramount, including oil and gas, pharmaceuticals, and manufacturing.

The JV347 enhances the capability of the series by incorporating advanced analytics and machine learning technologies. This model is designed to collect vast amounts of data, which it processes using algorithms to predict equipment failures and optimize maintenance schedules. The predictive capabilities of the JV347 help organizations reduce downtime and improve overall efficiency.

Returning to the JN327, this model stands out for its customization options. Users can tailor the system to meet specific operational requirements, making it a flexible choice for diverse industrial applications. Additionally, the JN327 offers scalable solutions, allowing businesses to expand their systems without needing extensive overhauls.

In summary, the GE JN327, JV327, JV337, and JV347 models showcase the company’s commitment to innovation in industrial control systems. With features such as real-time data processing, user-friendly interfaces, enhanced safety measures, advanced analytics, and customization options, these models address the dynamic needs of various industries. They represent a comprehensive solution for organizations aiming to improve efficiency, safety, and adaptability in their operations.