GE JN327, JV327, JV337, JV347 Preparation of Wall Cabinet and Wall, Duct Installation

Page 5

1.PREPARATION OF WALL CABINET AND WALL

NOTE: For easier installation make all hood and vent cutouts in the cabinet and wall before cabinet is permanently fastened in place. It is recommended that the power supply be brought into the hood from the wall below the cabinet as shown in Fig.1. However,

an optional location is shown in Fig. 2, where the power supply enters the top of the hood by passing through the wall cabinet.

A. WALL CABINET WITH RECESSED BOTTOM: Add the 2 required filler strips as shown in Fig. 3.

B. WALL CABINET WITH FLUSH BOTTOM: In some cases it may be necessary to provide clearance for the connection box cover mounting screw which extends slightly through the top of the hood. Clearance can be provided, if necessary, by carefully positioning the hood against the bottom of the cabinet and marking the screw position; clearance may then be provided by drilling a 1/4″ hole in the cabinet bottom.

NOTE: Hood Model JV347 is shipped set up in the non-ducted configuration.

2. DUCT INSTALLATION

Model JV327 See Figs. 4 & 9

The hood has been designed to mate with a standard 7″ round duct. (A round damper kit may be ordered. Order GE model number JXDA22.)*

A. If a rectangular duct is desired, a round to rectangular adapter must be used. Install a 4″ minimum length of 7″ round duct between the hood and adapter to obtain proper operation of the outlet damper.

B. If a 6″ round duct is desired, a 7″ to 6″ reducer is required. Install a 4″ minimum length of 7″ round duct between the hood and adapter to obtain proper operation of the outlet damper.

CAUTION: Do not fasten the duct to the flange on the top of the hood with screws. The screws will interfere with the fan blade, damaging the motor.

FLUSH OR RECESSED BOTTOM CABINET

11⁄4″

73⁄4″

FIGURE 1

 

Center line

 

 

11⁄2″ dia. clearance hole in wall for recommended power supply location

Centerline matches up with center of range or cooktop.

Cabinet

Ceiling

Soffit (optional)

11⁄4″73⁄4″

11⁄2″ dia. clearance holes

for optional power supply location

Filler strip

21⁄2″ min.

FIGURE 3

11⁄4″

FIGURE 2

 

66″ from bottom of cabinet to floor

RECESSED BOTTOM

These filler strips support the entire weight of the hood.

Make sure they are mounted firmly and are flush with the cabinet bottom.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents GE Quality Product When you get your new hood…When using your hood… If You Need Service… Important Safety InstructionsTo Operate Care and CleaningJN327 Important-Save for the local electrical inspector’s useJV327 JV337Preparation of Wall Cabinet and Wall Duct Installation14.5 Fuse Rating 15 amps Power SupplyElectrical Connection To replace the lamp cover Lamp ReplacementTo remove the lamp cover, if desired Problem Possible Cause Questions? Use This Problem SolverWrite down the model and serial numbers If You Need ServiceHelp Us Help You… Warranty

JN327, JV327, JV337, JV347, JN327, JV327 specifications

The GE JN327, JV327, JV337, JV347, and JN327 models represent a significant advancement in the field of industrial automation and control systems. These models are engineered to enhance efficiency, precision, and adaptability in various industrial applications.

The GE JN327 is a robust control system designed for versatile applications. One of its standout features is its high-performance processor, which ensures rapid data processing and response times. This model incorporates advanced data acquisition technologies, allowing for real-time monitoring of industrial processes. The integration of robust communication protocols ensures seamless connectivity with various devices, streamlining operational workflows.

The JV327, a variant in the series, is particularly known for its emphasis on user-friendly interfaces. Its intuitive design allows operators to easily navigate through complex data sets and control operations, minimizing the learning curve associated with new systems. The JV327 supports touch-screen technology, enhancing interactivity and accessibility for users.

The JV337 model takes a step further with enhanced safety features. It complies with international safety standards and incorporates redundancy systems to minimize the risk of failure in critical operations. This model is ideal for industries where safety is paramount, including oil and gas, pharmaceuticals, and manufacturing.

The JV347 enhances the capability of the series by incorporating advanced analytics and machine learning technologies. This model is designed to collect vast amounts of data, which it processes using algorithms to predict equipment failures and optimize maintenance schedules. The predictive capabilities of the JV347 help organizations reduce downtime and improve overall efficiency.

Returning to the JN327, this model stands out for its customization options. Users can tailor the system to meet specific operational requirements, making it a flexible choice for diverse industrial applications. Additionally, the JN327 offers scalable solutions, allowing businesses to expand their systems without needing extensive overhauls.

In summary, the GE JN327, JV327, JV337, and JV347 models showcase the company’s commitment to innovation in industrial control systems. With features such as real-time data processing, user-friendly interfaces, enhanced safety measures, advanced analytics, and customization options, these models address the dynamic needs of various industries. They represent a comprehensive solution for organizations aiming to improve efficiency, safety, and adaptability in their operations.
Top Page Image Contents