Installation instructions
BEFORE YOU BEGIN, READ THE FOLLOWING INSTRUCTIONS COMPLETELY AND CAREFULLY.
Installing your microwave oven
1. Empty the microwave oven and clean inside it with a soft, damp cloth. Check for damage such as misaligned door. Damage around the door or dents Inside the oven or on the exterior. If there Is any damage, do not operate the unit until it has been checked by an authorized Whirlpool service technician and any repairs made.
3.Do not block the vent or ah Intake open-
Ings on lhe rear of the oven. Blocking vent or air intake openlngs can cause damage to the oven and poor cooking results. Make sure the microwave oven legs are in place to ensure proper air flow.
2.Put the oven on a cart, counter, table or shelf that is strong enough to hold the oven and the food and utensils you put in it. (The control side of the unlt Is the heavy side. Use care when handling.) The weight of the oven is approx- imately 34 Ibs. (15.3 kg.].
4.Do not Install the mlcrowave oven so that any part of lt Is flush with a wall, shelf
or cabinet. Leave a total clearance of at least
5in. (12.7 cm) around the oven for proper operation.
Do not Install the oven next to or over a con- ventlonal surface unit or in any area where excessive heat and steam are generated. Thls could damage the mlcrowave oven.
7
