Toshiba HV6CS-MU Manual Operation, Closing the Circuit, For Motorized Spring-operated VCBs

Page 24

4. Operation

CAUTION

Failure to take the opportunity to discover abnormalities can result in injuries and equipment damage. Always check to make sure that the ON and OFF indicators are correct before operating the equipment.

4.1 Manual Operation

CAUTION

To avoid damaging the equipment, do not close the circuit when the unit switching indicator is ON.

4.1.1 Closing the Circuit

Check to make sure that the switching status is set to OFF.

4.1.1.1 For Motorized Spring-operated VCBs

First of all, attach the handle (see Figure 24 for a picture showing the handle installed).

The manual charging handle shall be applied for emergency case and maintenance purpose only, remove (not install) the handle at normal service condition.

Figure 24 Tighten the small screw (M5) provided, fasten the handle in position. The tightening torque should be 2.94 to 3.92 N · m (30 to 40 kgf · cm).

- 18 -

Image 24

Contents HV6CS Vacuum Circuit Breakers Fixed Type 7.2kV Voltage Class Page Important Notice About This Manual Contacting TIC’s Customer Support Center Table of Contents General Safety Information Safety Alert SymbolEquipment Warning Labels Equipment Inspection Connecting and disconnecting the main circuit Operating the VCBInstallation location During UseSpecial environmental conditions Applicable standards pertaining to switching surges Part Names From Receipt to Storage Receipt and UnpackingTransport Wrong Incorrect Method of TransportationTransportation Manual handling Storage Installation Mounting the VCBMounting in the panel Mounting Directly onto the Floor Screw Tightening Tightening torque Nominal Torque DiaPage Main Circuit Terminal Connections Pass the cable or conductor through the insulating cylinderGround Terminal Connections Control Circuit Cable ConnectionsOperation Manual OperationClosing the Circuit For Motorized Spring-operated VCBsCharging Handle Closed Lever Opening the Circuit Electrical Operation Control Circuit Motorized OperationPlug Installed in UV Trip Device Undervoltage TripMaintenance/Inspections Maintenance RecordDuring Maintenance/Inspections Types of Maintenance and Inspection WorkInspection Frequency Periodic Inspection Checkpoints Type of inspection Inspection frequencyVacuum Check Location Inspection Criteria Disposition Remarks MethodPrecautions Test Procedure Dielectric Breakdown Characteristics Page Toshiba

HV6CS-MU specifications

The Toshiba HV6CS-MU is a high-performance semiconductor device, primarily designed for automotive applications, particularly in battery management systems and electric vehicles. This versatile chip is part of Toshiba's HV series, known for its reliability, robustness, and efficiency in handling high voltage operations.

One of the standout features of the HV6CS-MU is its ability to operate at high voltages, making it suitable for demanding environments where traditional components may falter. It supports voltages up to 600V, which is essential for managing the power requirements of electric and hybrid vehicles. This high voltage capability allows for efficient energy management in various systems, from power inverters to energy storage units.

Additionally, the HV6CS-MU leverages Toshiba's proprietary technologies, including advanced gate drive and protection circuits. These technologies ensure that the device operates safely and reliably under various conditions. The built-in protection features help guard against over-voltage, over-current, and thermal problems, which are critical for maintaining system integrity and longevity.

Another compelling aspect of the HV6CS-MU is its efficiency. With low on-resistance and fast switching times, it minimizes power loss during operation. This efficiency translates not only to improved performance but also to extended battery life in electric vehicles. The ability to conserve energy is paramount in today's automotive industry, where sustainability and energy efficiency are increasingly important.

Furthermore, the HV6CS-MU is designed with a robust thermal management system. It can operate at elevated temperatures without compromising performance, making it suitable for various automotive environments. This feature is particularly vital in electric vehicles, where components are often subjected to significant heat during operation.

In terms of packaging, the HV6CS-MU comes in a compact, integrated format, allowing for ease of installation within various electronic assemblies. Its small footprint makes it ideal for space-constrained applications, providing engineers with more design flexibility.

In summary, the Toshiba HV6CS-MU is a state-of-the-art semiconductor device that embodies advanced technology, high efficiency, and robust performance characteristics. Its high voltage operation, integrated protection features, and efficient energy management make it a pivotal component in modern automotive designs, particularly in the realm of electric and hybrid vehicles. As the industry continues to evolve towards electrification, devices like the HV6CS-MU will play an essential role in shaping the future of automotive technology.