Toshiba HV6CS-MU During Maintenance/Inspections, Types of Maintenance and Inspection Work

Page 31

3)Equipment condition

4)Corrective actions or adjustments

5)Date of work

5.1 During Maintenance/Inspections

Before inspecting the electrical circuits, take the following measures to prevent electric shock:

1)After opening circuit for the VCB, open the disconnect switch on the power source side to place the main circuit and control circuits of the VCB in no-voltage status.

2)Lock the disconnect switch to prevent operation and label it with an "INSPECTION IN PROGRESS" tag.

3)Using a voltage detector, check to make sure that the circuits are in no-voltage status and ground the necessary circuits.

Discharge the residual charge from capacitors and cables before grounding. Space heaters, resistors and other units will remain hot even after they have been turned off. Install a protective cover temporarily, or wait until after the units have cooled to perform the inspection. To ensure safety, remove the ground line after the inspection is complete and return the equipment to its previous status.

5.2 Types of Maintenance and Inspection Work

Receiving inspection

A visual inspection for damage, deformation, missing parts and switching status (manual) to make sure that the product is in the same status as when it was shipped.

Patrol inspection

An inspection performed during patrols to check for abnormal noise or odor and see if there is anything wrong with the equipment during operation.

Periodic inspection

The equipment is shut off and a check made of the operation of the mechanism to make sure there is nothing wrong. The lubrication status of sliding and rotating parts is also checked and the mechanism is lubricated if needed.

Unscheduled inspection

Inspections that are implemented as required.

5.3 Inspection Frequency

The inspection frequency and points to be inspected will differ depending on the status of use, frequency of switching, the size of the breaking current and other factors. In general, inspections should be implemented at the intervals shown in the table below.

- 25 -

Page 30 Page 32
Image 31
Page 30 Page 32
Contents HV6CS Vacuum Circuit Breakers Fixed Type 7.2kV Voltage Class Page Important Notice About This Manual Contacting TIC’s Customer Support Center Table of Contents Safety Alert Symbol General Safety InformationEquipment Warning Labels Equipment Inspection Operating the VCB Connecting and disconnecting the main circuitDuring Use Installation locationSpecial environmental conditions Applicable standards pertaining to switching surges Part Names Receipt and Unpacking From Receipt to StorageWrong Incorrect Method of Transportation TransportTransportation Manual handling Storage Mounting the VCB InstallationMounting in the panel Screw Tightening Tightening torque Nominal Torque Dia Mounting Directly onto the FloorPage Pass the cable or conductor through the insulating cylinder Main Circuit Terminal ConnectionsControl Circuit Cable Connections Ground Terminal ConnectionsFor Motorized Spring-operated VCBs OperationManual Operation Closing the CircuitCharging Handle Closed Lever Opening the Circuit Electrical Operation Motorized Operation Control CircuitUndervoltage Trip Plug Installed in UV Trip DeviceMaintenance Record Maintenance/InspectionsTypes of Maintenance and Inspection Work During Maintenance/InspectionsInspection Frequency Type of inspection Inspection frequency Periodic Inspection CheckpointsLocation Inspection Criteria Disposition Remarks Method Vacuum CheckPrecautions Test Procedure Dielectric Breakdown Characteristics Page Toshiba

HV6CS-MU specifications

The Toshiba HV6CS-MU is a high-performance semiconductor device, primarily designed for automotive applications, particularly in battery management systems and electric vehicles. This versatile chip is part of Toshiba's HV series, known for its reliability, robustness, and efficiency in handling high voltage operations.

One of the standout features of the HV6CS-MU is its ability to operate at high voltages, making it suitable for demanding environments where traditional components may falter. It supports voltages up to 600V, which is essential for managing the power requirements of electric and hybrid vehicles. This high voltage capability allows for efficient energy management in various systems, from power inverters to energy storage units.

Additionally, the HV6CS-MU leverages Toshiba's proprietary technologies, including advanced gate drive and protection circuits. These technologies ensure that the device operates safely and reliably under various conditions. The built-in protection features help guard against over-voltage, over-current, and thermal problems, which are critical for maintaining system integrity and longevity.

Another compelling aspect of the HV6CS-MU is its efficiency. With low on-resistance and fast switching times, it minimizes power loss during operation. This efficiency translates not only to improved performance but also to extended battery life in electric vehicles. The ability to conserve energy is paramount in today's automotive industry, where sustainability and energy efficiency are increasingly important.

Furthermore, the HV6CS-MU is designed with a robust thermal management system. It can operate at elevated temperatures without compromising performance, making it suitable for various automotive environments. This feature is particularly vital in electric vehicles, where components are often subjected to significant heat during operation.

In terms of packaging, the HV6CS-MU comes in a compact, integrated format, allowing for ease of installation within various electronic assemblies. Its small footprint makes it ideal for space-constrained applications, providing engineers with more design flexibility.

In summary, the Toshiba HV6CS-MU is a state-of-the-art semiconductor device that embodies advanced technology, high efficiency, and robust performance characteristics. Its high voltage operation, integrated protection features, and efficient energy management make it a pivotal component in modern automotive designs, particularly in the realm of electric and hybrid vehicles. As the industry continues to evolve towards electrification, devices like the HV6CS-MU will play an essential role in shaping the future of automotive technology.
Top Page Image Contents