Additional functions
Buzzer
The end of a program and faults can be announced by a buzzer tone.
The buzzer at the end of a program sounds five times in intervals with a brief break in between. The buzzer sounds up to one hour if the dishwasher is not turned off.
The buzzer for a fault sounds continuously. The buzzer sounds for up to two minutes if the dishwasher is not turned off or the fault is fixed.
The buzzer is activated by default. It can be set to off, so it does not sound at the end of a program. The buzzer for a fault cannot be set to off.
^Open the door.
^Turn the dishwasher off o.
^Press the program button and at the same time turn the dishwasher on g. Hold the program button until the lower right program indicator comes on.
If it does not come on, start over.
^Press the program button briefly four times.
The "Intake/Drain" indicator flashes 4 times in intervals.
The upper right program indicator shows if the program end buzzer is turned on or off.
–Upper right program indicator flashes: Buzzer is turned on
–Upper right program indicator is off: Buzzer is turned off
^To change the setting, press the program button until the "Intake/Drain" indicator lights.
^Press the program button briefly three times.
The setting is saved.
^Turn the dishwasher off o.
28