NEC G 1180 Issue Possible fault Solution Dishes are still, Wet, glasses, Cutlery are, Spotted

Page 36

Frequently asked questions

	Issue	Possible fault	Solution
	Dishes are still	The rinse aid setting may	Increase the dosage, refill the
	wet, glasses and	be too low, or the rinse aid	reservoir or switch the rinse
	cutlery are	reservoir is empty.	aid product when refilling, see
	spotted.		"Before using for the first time".
		Dishes were taken out too	Leave dishes in longer, see
		soon.	"Use".
		"2 in 1" products were used.	Use powder detergent and
		These products have a low	add rinse aid.
		drying effect.
	White residue is	Not enough rinse aid was	Increase the dosage, see
	visible on cutlery	used.	"Before using for the first time".
	and dishes.	Unsuitable "2 in 1" or "3 in 1"	Use a different detergent,
	Clouding occurs	Unsuitable "2 in 1" or "3 in 1"	Use a different detergent,
	Clouding occurs	products were used.	normal tabs or normal powder
	on glassware and	products were used.	normal tabs or normal powder
	on glassware and		detergent.
	film can be wiped		detergent.
	film can be wiped
	off.

36

Image 36

Contents En US, CA Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Disposal of an applianceGuide to the dishwasher Guide to the dishwasherControl panel Caring for the environment Energy saving washingBefore using for the first time To open the door To close the doorPull the handle to open the door Rinse aid Adding rinse aidRinse aid indicator Adjusting the dosageRinse aid amount Flashing rhythm Three timesLoading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Cutlery tray Cutlery basket Spoon inserts for the cutlery basketUpper basket Cup racksCoffee bar Adjusting the upper basket Slide out the upper basketLower basket Vase/Bottle holder Basket accessories Use DetergentAdding detergent Turning on Selecting a programStarting a program Program guide UsageAt the end of a program Interrupting a programChanging a program Additional functions BuzzerFactory default Frequently asked questions Technical faultsIssue Possible fault Solution Buzzer sounds All program indicatorsFlash when the door is Running when the doorProblems water intake/drain Issue Possible fault Solution Shortly afterProgram start Stops, the buzzerGeneral problems with the dishwasher Sounds Poor cleaning results Issue Possible fault Solution Dishes are still Wet, glassesCutlery are SpottedIssue Possible fault Solution Glasses are DiscoloredFilm cannot be wiped Off Glasses are dullAfter sales service PC UpdateRepairs MieleCareTransport Page User Maintenance Instructions Cleaning and Care Cleaning the wash cabinetCleaning the door and the door seal Cleaning the control panelTriple filter system Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Page Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsPlumbing Connection to the water supplyDrainage Venting the drainage systemPage