Marantz SR6200 manual System Setup 2/2 Selecting the Digital Input, Example, Next-Setup

ENGLISH OSD MAIN MENU

1.Press the AMP button ¤6.

2.Press the MENU button ¤0to display the “MAIN MENU” of the on- screen display menu.

Choose a desired item in the contents with or button, and press the OK button to select.

Display will change to menu for each item.

SYSTEM SETUP

SYSTEM SETUP 1/2

7CH-INPUT :The 7 channel input of the SR6200 can be selected to use a 7channel input. Select 7

channel use by or button.

TV AUTO : This product is equipped with a TV-auto ON/

OFF system, which automatically turns on or off the power 1 second to 5 minutes after the TV video input signal has been sent or has been stopped.

Switch the TV AUTO ON/OFF function to enable or disable with or button.

To use this function, connect the TV video input to TV tuner’s video output.

NEXT SETUP/EXIT :If you desire to continue the next setup ,press the OK button on NEXT-SETUP, if you desire to exit from OSD menu system, press the OK button on EXIT.

SYSTEM SETUP 2/2 (SELECTING THE DIGITAL INPUT)

Four digital inputs can be assigned for the desired source.

Use this menu to determine which source is connected to which input.

Example;

When the digital output of a DVD player is connected to Digital 4 (input jack) of the SR6200;

1.Move the cursor on the line of the DVD with cursor buttons or

.

2. Press the cursor or button until “DIG4” is displayed.

3.Press the OK button to chose.

4.If you desire to continue the next setup, press the OK button on

NEXT-SETUP.

If you desire to exit from OSD menu system, press the OK button on EXIT.

Notes:

The TUNER, TAPE, VCR1 and AUX are assigned to the analog input, and are prevented from selecting any digital input.

While the DTS-LD or DTS-CD is playing, this setup is not available, this is to avoid noise being generated from the analog input. Stop the LD or CD playback to setup.

The SR6200 does not switch from digital input to analog input or vice versa automatically.

In the event that both digital and analog inputs are connected to SR6200, if you desire to switch to an analog input temporarily, you can switch by pressing the A/D button u.

12