Marantz SR6200 manual Video

FRONT PANEL FEATURES (SEE PAGE iii.)

qPOWER switch and STANDBY indicator

When this switch is pressed once, the unit turns ON and display appears on the display panel. When pressed again, the unit turns OFF and the STANDBY indicator lights.

When this unit is in the standby mode, pressing one of the FUNCTION SELECTOR buttons also allows to turn the power on.

“When the STANDBY indicator lights up, the apparatus is NOT disconnected from the AC supply mains.”

wPHONES jack for stereo headphones

Conventional dynamic headphones can be plugged in here.

Notes:

When using headphones, the surround mode is switched automati- cally to STEREO and the sound from the speakers is muted.

The surround mode returns to the previous setting as soon as the plug is removed from the jack.

eSURROUND MODE Selector knob

When this knob is turned, the surround mode is switched in the following sequence.

AUTO STEREO 6CH STEREO VIRTUAL MATRIX

iS. ( Source) DIRECT button

When this button is pressed, the tone control circuit is bypassed as well as Bass Management.

Notes:

The surround mode is automatically switched to AUTO when the source direct function is turned on.

Additionally, Speaker Configurations are fixed automatically as follow. Front SPKR = Large

Center SPKR = Large Surround SPKR = Large Surround Center SPKR = Yes Sub woofer = Yes

oSLEEP button

Set the sleep timer function with this button .

!0DIMMER button

When this button is pressed once, the display is dimmed.

When this button is pressed twice, the display is turned off and “DISPLAY OFF” indicator lights up.

Press this button again to turn the display ON again.

!1MUTE button

Press this button to mute the output to the speakers. Press it again to return to the previous volume level.

!2CLEAR button

ENGLISH

DTS

DOLBY PL II

MOVIE

DOLBY PL II

MUSIC

Note:

Not all modes

			STADIUM
				HALL
DOLBY	6.1CH	CS 5.1
				MOVIE
PRO LOGIC	SURROUND

will be present if an analog input is selected.

Press this button to cancel the station memory setting mode or preset scan tuning.

!3MEMORY button

Press this button to enter the tuner preset memory numbers and station names.

!4TUNING / PRESET UP and DOWN buttons

rVOLUME control knob

Adjusts the overall sound level. Turning the control clockwise increases the sound level.

tFUNCTION SELECTOR buttons (AUDIO/

VIDEO)

These buttons are used to select the sources.

The video function selector, such as TV, DVD , VCR1 and DSS/VCR2, and AUX, selects video and audio simultaneously.

Audio function sources such as CD, TAPE , CDR/MD ,and TUNER may be selected in conjunction with a Video source.

This feature (Sound Injection) combines a sound from one source with a picture from another.

Choose the video source first, and then choose a different audio source to activate this function.

y7CH INPUT button

Press this button to select the output of an external multi channel decoder.

uA/D (Analog/Digital) SELECTOR button

This is used to select between the analog and digital inputs.

Note:

This button is not used for an input source that is not connected to a digital input.

During reception of AM or FM, you can scan the other frequencies or select another preset station pressing these buttons.

!5FREQUENCY / PRESET button

During reception of AM or FM, you can change the function of the UP/ DOWN buttons for scanning frequencies or selecting preset stations by pressing this button.

!6FM MODE button

Press this button to select the auto stereo mode or mono mode when the FM band is selected. The AUTO indicator lights in the auto stereo mode.

!7INFRARED SENSOR window

This window receives infrared signals from the remote control unit.

!8AUX input jacks

These auxiliary video/audio input jacks accept the connection of a camcorder, portable VCR, etc.

3