To Disassemble Unit | Deni 5530 manual

while the canister remains stationary.

11.Immediately pour the chilled mixture in the top opening of the Clear-Vue lid to begin the freezing process.

12.Leave the machine on for about 10-20 minutes until mixture becomes the desired thickness. Your result should be a soft ice cream that can be dispensed into a cone (or bowl) using the soft serve spout.

14.To serve: place a cone or bowl under the soft serve spout. Push down on the soft serve spout handle to distribute the ice cream. Pull the handle back up when you reach the desired amount of ice cream. Turn the unit off when complete. Any remaining amount of ice cream you do not wish to eat at that time should be placed in a freezer-safe airtight container. Do not use metal utensils or objects in the Speedee Freeze Canister. Do not leave the ice cream in the Speedee Freeze Canister for any great period of time (more than 30 minutes) or it will freeze to the sides.

NOTE: The soft serve spout is not intended for frozen desserts with nuts, candies, or other hard ingredients , these ingre- dients will not pass through the soft serve spout, risking damage and/or failure to ice cream making.

TO DISASSEMBLE UNIT:

1.Make sure the switch at the top of the motor top is in the “OFF” position.

2.Unplug the unit.

3.Turn the motor and lid to the unlock position and lift motor and lid off the body.

4.Lift the paddle out of the canister.

5.To remove the clear-vue lid from the motor, face the motor upright. Place both thumbs on the spot marked “ latches” scoop your hands beneath the motor. Applying gentle pres- sure on the latches, gently lift the motor from the lid.

6.Do NOT immerse the motor in water. Contact with water, can result in damage and/or failure of the motor. The motor can be wiped with a damp cloth.

7.Remove all ice cream from the canister before removing the soft serve spout. To remove the soft serve spout turn clock- wise.

8.Lift the canister to clean. Do NOT use metal utensils or objects in the Speedee Freeze canister.

9.Do NOT place any parts in the dishwasher. Instead, wash with warm water and a mild soap. Do NOT use abrasive detergents or metal objects to clean the parts of the ice cream maker.